Page 7 of 18 FirstFirst ... 5678917 ... LastLast
Results 241 to 280 of 691
  1. #241
    RC poster
    Join Date
    Feb 2010
    Location
    wellsboro, PA
    Posts
    10

    stampede snow fun

    This is my older stampede that I upgraded with electronics from a slash so it is waterproof, also it has a set of tire chains I made to add traction in the snow.


    [IMG][/IMG]



    [IMG][/IMG]

  2. #242
    RC poster
    Join Date
    Feb 2010
    Posts
    1


    My son and I first project. Pede with the Tango bodies. Steady upgradeing parts.To bad to say after 1 week they don't look that good now. Like they say,, they don't run good untill you put some scratches on them.

    Please keep all images to a width of 640 pixels or less. To do this, you must edit the image using an image editor before you upload the picture to your host.

    I have changed the image(s) to link(s) and/or clickable thumbnail(s) so that people don't have to scroll to read the thread. You can also upload clickable thumbnails that can be selected to view the photo at the original resolution.

    -ksb51rl
    Last edited by ksb51rl; 02-14-2010 at 11:02 PM.

  3. #243
    RC poster
    Join Date
    Jan 2010
    Posts
    7
    Here is my shelf princess after bashing

  4. #244
    RC Turnbuckle Jr. pavmentsurfer's Avatar
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    11,147

    The S-Pede and my Basher

    First is my Basher. All upgraded, VXL, Rustler body, Stamp VXL wheels and 30 series Badlands.


    Next is my S-Pede project. So far its completely stock except for a custom built body. Upgrades on the way including Jaco Foams all round and new gearing. Trying to break 70mph.

    Pede, Summit,
    ERBE, Rally,
    Motley Crew, 1SQ

  5. #245
    RC Competitor
    Join Date
    Dec 2009
    Location
    SLC, UT
    Posts
    78

    Grave Digger Stampede

    Finished restoring my 1994 Stampede....Amazing fun it was. Runnin like a champ now and made it a Grave Digger haha!




  6. #246
    RC Champion
    Join Date
    Jan 2007
    Location
    Gilbert, AZ
    Posts
    1,256

    Stampede Build Complete








  7. #247
    RC Champion
    Join Date
    Jan 2007
    Location
    Gilbert, AZ
    Posts
    1,256

  8. #248
    RC Racer
    Join Date
    Jan 2010
    Location
    Calhoun, LA
    Posts
    159
    My RaceReady 'Pede
    Proud member of the 70mph Stampede club!!!!

  9. #249
    RC Racer
    Join Date
    Feb 2005
    Location
    uk
    Posts
    117
    heres my new vxl only had it a few days and alread y have upgraded the wheelie bar wheels to alloy ones and alloy front caster hubs in red
    bearing carriers are on order aswell plus changed the shell just gotta drill and fit it
    Last edited by ksb51rl; 02-26-2010 at 07:56 PM.

  10. #250
    RC Champion
    Join Date
    Jan 2007
    Location
    Gilbert, AZ
    Posts
    1,256

    My Hybra-Pede and New Merv, cant get enough....




  11. #251
    RC Racer
    Join Date
    Sep 2009
    Location
    Middletown, De
    Posts
    103
    My 1/8 Stampede.



    It might break.... then again it broke....

  12. #252
    RC Racer
    Join Date
    Feb 2005
    Location
    uk
    Posts
    117
    heres my latest shell as beetle was amare to fit so didnt run it
    landrover defender 90 by hpi

  13. #253
    RC Enthusiast
    Join Date
    Sep 2008
    Location
    Bath, England
    Posts
    25
    Here's my 'pede.

    FLM EXT Chassis
    RPM Rear arms
    RPM Bearing Carriers
    RPM Caster Blocks
    RPM Rear Bumper Mount
    RPM Rear Shock tower
    HPI F150 Body
    Slash bumpers all round
    Spektrum 2.4
    Proline M2K tyres on rims wheels front and RPM rims back

    Will upgrade to front RPM arms, turnbuckles and shock tower when originals break.

    Stampede in action



    Please keep all images to a width of 640 pixels or less.
    -ksb51rl
    Last edited by ksb51rl; 03-16-2010 at 03:28 PM.

  14. #254
    RC Racer
    Join Date
    Feb 2010
    Location
    Williamsburg, KY
    Posts
    229

    Few Chassis pics

    Current Upgrades:
    Novak Havoc 8.5 sensored Brushless
    2075 Blue Waterproof servo
    Blue Stock length REM Chassis
    Blue REM Front and Rear shock towers
    Blue RPM a-arms all around
    Blue Shock covers
    Masher 2k's on HPI Rims
    7 cell NIMH batteries
    Blue TRX Caster blocks

    Next Upgrades:
    RPM or TRX adjustable Camber links





    crawl-bash-swim. The Summit does it all.

  15. #255
    RC Enthusiast
    Join Date
    Oct 2009
    Posts
    31





    Stampede is slowly turning shiny! The roll cage is the latest addition, however it affects the handling really badly and I spend quite a lot of my time on the roof!

  16. #256
    RC Qualifier
    Join Date
    Feb 2010
    Location
    Twin Cities Metro MN
    Posts
    465
    This is my first attempt at doing a clear body. I found a Parma ’42 Willy’s (I thought they only did Jeep)
    After seeing an old style body in another thread (thanks Thunderbutt {words I never thought I would speak})


    I bought what was labeled as Burgundy Metallic, but after the first coat, it looked more like bright fuchsia. I also got black for the windows, so I removed the masks & sprayed the whole inside with the black, which darkened the paint. Kinda like the way it turned out, though.



    Had to trim more off the fenders than I wanted, which is a shame because there was a lot of character in them. Oh well, I still like the way it turned out.





    And now…naked!





    Started out as a XL-5, upgraded to a Velineon system, TRX turnbuckles all around, TRX bearing carriers & castor blocks, Futaba 3305 servo.
    Merged
    Forgot to add – RPM front bumper & suspension arms, TRX Big Bore shocks.
    Last edited by ksb51rl; 03-19-2010 at 08:42 PM.
    Censorship is wrong

  17. #257
    RC Qualifier
    Join Date
    Mar 2010
    Location
    Apopka FL
    Posts
    285













  18. #258
    RC Competitor
    Join Date
    Feb 2010
    Location
    Ontario
    Posts
    88
    Older stampede Torn Down-
    RPM Shock towers, carriers, slash bumper, motor cover, traxxas caster blocks
    waterproof XL-5, 2075 Servo, Tactic 2.4ghz. RPM revolvers with Moabs, Proline Hummer H2 body








  19. #259
    RC Competitor
    Join Date
    Feb 2010
    Location
    Ontario
    Posts
    88
    ..And my all stock XL-5 Monster stampede (Proline rustler desert rat body)


  20. #260
    RC Enthusiast
    Join Date
    Jun 2008
    Location
    Hudson Valley NY
    Posts
    48


    Please keep all images to a width of 640 pixels or less. To do this, you must edit the image using an image editor before you upload the picture to your host or edit the photo in your host.
    I have changed the image(s) to link(s) and/or clickable thumbnail(s) so that people don't have to scroll to read the thread. You can also upload clickable thumbnails that can be selected to view the photo at the original resolution.
    -ksb51rl
    Last edited by ksb51rl; 04-16-2010 at 11:14 PM.

  21. #261
    RC Qualifier
    Join Date
    Jan 2010
    Location
    Central Florida
    Posts
    639
    My RC Pics

    67 Vette/Pede (off the shelf HPI shell)


    Slampede (slash body on pede)


    Pede-off Buggy (Roll Cage with home made fin)


    Lots more images Full sizd so you can see details....
    http://s963.photobucket.com/home/mdlopez1/allalbums

    ENJOY!
    Last edited by mdlopez1; 04-21-2010 at 08:55 PM.
    Just do it...they make replacement parts.VXL power

  22. #262
    RC Competitor
    Join Date
    Feb 2010
    Location
    London Ontario Canada
    Posts
    52
    Mine's not shiny or pretty...



    SPOONS
    2 Extenda-pedes , Rustler VXL and a stock pede

  23. #263
    RC Qualifier
    Join Date
    Jan 2010
    Location
    America
    Posts
    616
    Hummer H1 Body 1/10th Revo Wheels and tires Wheel extensions.com spacers 3/4 inch widener 12-14 mm


    http://i658.photobucket.com/albums/u...1272852599.jpg

    http://i658.photobucket.com/albums/u...1272852625.jpg

    Please keep all images to a width of 640 pixels or less.
    -ksb51rl
    Last edited by ksb51rl; 05-03-2010 at 11:58 PM.
    V Twin Emaxx
    inferno gt2 aka XO1 Destroyer

  24. #264
    RC Racer
    Join Date
    Sep 2009
    Posts
    114
    heres is my project just need paint.



  25. #265
    RC Qualifier
    Join Date
    Jan 2010
    Location
    Central Florida
    Posts
    639

    Large Paddle tire PEDE

    I Put 40 series (5.9x3.5) paddles on pede...

    Just do it...they make replacement parts.VXL power

  26. #266
    RC Racer
    Join Date
    Jan 2010
    Location
    ontario Canada
    Posts
    189
    it's changed a bit but these are the only pics i have.
    http://i125.photobucket.com/albums/p...IMG_0016-1.jpg
    http://i125.photobucket.com/albums/p...IMG_0017-1.jpg

    Please keep all images to a width of 640 pixels or less.
    -ksb51rl
    Last edited by ksb51rl; 05-18-2010 at 11:32 PM.

  27. #267
    RC Champion
    Join Date
    Mar 2010
    Location
    Davenport, Iowa Quad Cities
    Posts
    2,465
    Heres my childrens stampedes. All three are Velineon Brushless. They have a few RPM hop ups with more on the way!

    RPM Front bumper
    RPM Reay Wheelie bar mount
    RPM Motor Protector

    http://sphotos.ak.fbcdn.net/hphotos-..._3706607_n.jpg
    http://sphotos.ak.fbcdn.net/hphotos-..._3706607_n.jpg

    Please keep all images to a width of 640 pixels or less. To do this, you must edit the image using an image editor before you upload the picture to your host or edit the photo in your host.
    I have changed the image(s) to link(s) and/or clickable thumbnail(s) so that people don't have to scroll to read the thread. You can also upload clickable thumbnails that can be selected to view the photo at the original resolution.
    -ksb51rl
    Last edited by ksb51rl; 05-18-2010 at 11:30 PM.
    Thrash It, Bash it, Break it, No Regrets!!!

  28. #268
    RC poster
    Join Date
    May 2010
    Posts
    1




    Here's my old Stampede. Pre XL1 (bought in 2002) originally it had a mechanical speed control and a Stinger 20T (long gone!) and it's been the recipient of many many power combos over the years. Recently updated with the XL5 and Titan 12T out of my 2WD Slash (upgraded to VXL), it can still get down with the big boys! With a 8.4 battery it'll walk a 20 foot wheelie from a dead stop on asphalt, and give a stock 2WD Slash a run for it's money on the dirt!
    Last edited by ksb51rl; 05-18-2010 at 11:29 PM.

  29. #269
    RC Competitor
    Join Date
    Feb 2010
    Location
    Ontario
    Posts
    88
    Quote Originally Posted by Arctic Fire
    Please keep all images to a width of 640 pixels or less.
    -ksb51rl
    640 or less? What are we to look at postage stamps now? you can't be serious. Thats a Joke, and is going to cause me to find another forum. That's Crap. Time to update your EGA monitor there ksb51rl...
    If it ain't broke... break it.

  30. #270
    RC Competitor
    Join Date
    Feb 2010
    Location
    Ontario
    Posts
    88
    shrunk my pictures....









    Also an updated Pic of the hummers basher buddy, the Monster. Just replacing parts as they break, so no major upgrades except RPM stuff here and there. I like the shock covers, they seem to really help in the mud and dust.

    Last edited by ksb51rl; 05-26-2010 at 08:14 AM.
    If it ain't broke... break it.

  31. #271
    RC Racer
    Join Date
    Apr 2010
    Location
    USA
    Posts
    216


    Last edited by ksb51rl; 06-14-2010 at 11:11 PM.

  32. #272
    RC Turnbuckle Jr. thedreadedend's Avatar
    Join Date
    Jun 2010
    Location
    Springfield, Ma.
    Posts
    3,356
    this is my 1/8 REM vxl stampede. the F-Bombtruck-basher body
    I'm not a hatchet man! I'm a maggot!

  33. #273
    RC poster
    Join Date
    Jun 2010
    Posts
    17
    Last edited by ksb51rl; 07-20-2010 at 11:44 PM.

  34. #274
    RC Racer
    Join Date
    Dec 2002
    Location
    New York
    Posts
    195
    My first ever RC paint job (at over 30, lol)......I learned alot...look forward to the next one.



    Savage Flux 2350 & Pede VXL (3607)

  35. #275
    RC Champion
    Join Date
    Jun 2007
    Location
    Harrogate, TN
    Posts
    1,948


















    Velineon SpeedPede
    SPC 3s 5000
    MambaMax
    71.3mph

  36. #276
    RC Champion
    Join Date
    Jun 2007
    Location
    Harrogate, TN
    Posts
    1,948
    Velineon SpeedPede
    SPC 3s 5000
    MambaMax
    71.3mph

  37. #277
    RC Turnbuckle Jr. TAT2's Avatar
    Join Date
    Apr 2007
    Location
    Harm City
    Posts
    3,702
    Just a few random, older pix.











    Last edited by TAT2; 07-18-2010 at 02:27 PM.
    99%er

  38. #278
    RC Qualifier
    Join Date
    Apr 2008
    Location
    Windsor Ontario Canada
    Posts
    862

    Just found 2 more pics. Thought i'd post them.





    Same truck, diffrent rims/tires. I like how these ones look better.
    Traxxas start making dirt bikes! :)

  39. #279
    RC poster
    Join Date
    Jun 2010
    Location
    Ottawa, Canada
    Posts
    13
    http://www.royallepagemc.ca/60/38560/324591/324591.ipv

    The kids first attempt at painting a body so he kept it pretty basic. Stock body met it's maker after some pretty hard bashing. New chassis, shocks, steering servo and various other parts.
    Last edited by Canstamp; 07-27-2010 at 03:12 PM.

  40. #280
    RC Racer
    Join Date
    Jul 2010
    Posts
    182
    Here are a few shots of my 2" extended Stampede
    Get'n dirty:







    And all cleaned up:


    O S E !!!! The place to be !!!!

Page 7 of 18 FirstFirst ... 5678917 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •