This is the on road
Rusty 3710 gone VXL
Well i did it made my Rusty 3710 Brushless , Put all metal gears in the trans, Hears a few pictures , the body is off a XL5
1 Rusty VXL
Last edited by Zigz07; 04-06-2012 at 07:37 PM.
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
"My Ideas always work sometimes"
Here is my Rustler vxl
Integy aluminum gearbox,
RPM gearbox cover,
RPM front ant rear a-arms, rear shocktower,
RPM front bumper,
Aluminum rear hubs
Motor heatsink with cooler,
Stock tires (25/83),
Talon tires (gearing: 19/86),
Pro-line dirt paw tires (19/86),
Robinson racing 48p 19t pinion gear (never buy robinson racing!!!!!!!!),
***** 5000 3s lipo,
Battery expansion kit,
Motor temperature meter.
Last edited by lifeisshort; 04-19-2012 at 11:55 AM.
A playground for my Rusty I found this afternoon....I must come back!
My Rusty getting dirty for the first time
here are pics of my xl5, motor and misc parts en-route
Last edited by degenerit; 04-29-2012 at 08:31 PM.
You got to slam it baby!![IMG]http://i1180.photobucket.com/albums/x412/1porkman/IMAG0495.jpg[/IMG]hotobucket.com/albums/x412/1porkman/IMAG0511.jpg[/IMG]
Last edited by ScottySherman; 05-14-2012 at 08:24 PM.
Last edited by rustlerMLB; 05-20-2012 at 03:19 PM.
Guess my pics weren't showing up. My bad.
Last edited by Sanfran49erz; 05-21-2012 at 09:07 PM.
this is my rusty..mostly stock....
Bald tires in 1 week lol
Rustler Vxl,Slash 2WD,Slash 4X4,SPC Lipos
Nice pics you guys, some of your cars have incredible mods!
I bought this Bandit back in 1997, this is it in "car park" trim. I run minipins when running on AstroTurf tracks.
The electronics are vintage too:
In terms of mods, I've forgotten some things over the years, but here is what I can remember:
* Ball races all round.
* 4WD buggy wheels from Ansmann. Had to drill these bigger myself so they would fit. (I just hated the non-standard sized Bandit front wheels)
* Rustler front axels to be able to screw on the non-stop wheels. (Bandit ones too short)
* Non-Traxxas springs cannot remember what, but much softer. (I found the stock ones absolutely useless on bumpy tracks)
* Turnbuckles all round.
* Steel Drive Yoke Set.
* Coralliy Street Touring Motor, 16 turn Double.
This is my 1st paint job, I call it the pumpkin racer.
IHaul this is a picture thread, not a quote and criticize thread.
I think the red aluminum looks fantastic btw...at least until he crashes it!
Right after I bought my rusty!
Last edited by bzz83; 06-27-2012 at 09:04 AM. Reason: pic thread!
Sl4sh MM 2650kv
Grave Digger Pede
Back together from a teardown for some STRC goodies:
hey fellas i am new to the rc hobby. i went big for the first car i got the rustler vxl. ive had some big problems. i had it for one day 5 minutes after running it broke the whole front end... i got it back together. but can some people help me with what i need to upgrade in the front end only. the parts an whats best for it. as in racing an bashing things. love to have fun. an also can some people also help me with the battery catagory to.. i would really appriciate the help. thanks guys
my baby =)
I hope u guys can see it ok. Anyways it need alot of cosmetic work. The truck it self runs great. Came with aluminum upgrades. 4/5 e bay rustler
My old body got pretty cracked during a race, so here's a new one... simple, lightweight one thin coat that's all...
Also got a new motor:
Stampede VXL, Stampede 4x4, Rustler VXL
Last edited by TitoBlanch; 08-01-2012 at 09:19 AM.
Powered by Castle
Brushless converted Revo and stock Rustler VXL (well other than the RPM bumper)
JConcepts Illuzion Rustler "Raptor SVT" Body
Pro-Line 30 Series Sand Paw 2.8" Tire
I broke a Rear Arm running into a tree. Decided to see how the whole thing was put together so I took it all apart. Plasti-Dipped some parts in Red and then put it back together. FYI I'm a Noob
Last edited by burtch07; 09-02-2012 at 03:20 AM. Reason: I can't post pic from my computer
Cant upload any pics very fustrating, not a user friendly forum
Last edited by burtch07; 09-02-2012 at 03:37 AM.
2 Rustle Beans mobbin out in the street. I cut a hole in the winshield and mounted a sticky 3M go pro mount. Footage by Hero Burtch
Last edited by burtch07; 09-02-2012 at 10:33 AM.