Page 22 of 25 FirstFirst ... 122021222324 ... LastLast
Results 841 to 880 of 974
  1. #841
    RC poster
    Join Date
    Jun 2013
    Posts
    3

  2. #842
    RC poster
    Join Date
    Jun 2013
    Location
    Warsaw, Poland
    Posts
    11
    My Rusty


  3. #843
    RC poster
    Join Date
    Jun 2013
    Location
    Warsaw, Poland
    Posts
    11
    and my body no.2


  4. #844
    RC poster
    Join Date
    Jun 2013
    Posts
    2
    My Rustler



  5. #845
    RC poster
    Join Date
    Jun 2012
    Location
    5 miles from Prescott AZ
    Posts
    8
    Muddin!!




  6. #846
    RC poster
    Join Date
    Jun 2012
    Location
    5 miles from Prescott AZ
    Posts
    8
    Muddin




  7. #847
    RC Champion
    Join Date
    Jan 2013
    Location
    SE Texas
    Posts
    1,178
    Joined the Rustler family yesterday...

    --
    "Dude,I almost had you"
    R.I.P Paul Walker

  8. #848
    RC Enthusiast
    Join Date
    Feb 2013
    Location
    Sicily
    Posts
    43
    [IMG][/IMG][IMG][/IMG]
    Last edited by kelvin53778; 07-02-2013 at 04:51 AM.

  9. #849
    RC Qualifier
    Join Date
    Jul 2012
    Location
    Baltimore, Maryland
    Posts
    457


    69 Charger, flourescent orange/retro reflective
    Castle MMP ESC
    Trinity Epic 3750kv 550
    RPM: arms x4
    axle carriers x4
    shock towers front and rear
    transmission case
    front body mount
    TRX: red anodized camber n toe rods
    steering bell n link
    Hardened steel output yokes
    Hawk2 steel tranny gears
    Wheelie bar
    Battery expansion kit
    STRC aluminum front bulkhead
    Full bearings n steel hollow balls
    Jaco foams pink/purple on black dyed wheels
    Black dyed chassis
    Last edited by Dadx2mj; 07-05-2013 at 10:50 AM.
    Modded to the Max
    Drive it like its Hot

  10. #850
    RC Enthusiast
    Join Date
    Jul 2013
    Posts
    38

    Here some pics of my Bandit.

  11. #851
    RC Enthusiast
    Join Date
    May 2011
    Location
    Southern California
    Posts
    47
    Play in the dirt, I think yes . Here's a few of the pictures I took.
    Was nice and clean.









    Last edited by DirtyIsBetter; 07-06-2013 at 05:53 PM.

  12. #852
    RC Enthusiast
    Join Date
    Feb 2013
    Location
    Sicily
    Posts
    43
    took a photo of my sons rustler near the water in sicily
    [IMG][/IMG]

  13. #853
    RC poster
    Join Date
    Jun 2013
    Location
    Warsaw, Poland
    Posts
    11
    My new look


  14. #854
    RC poster
    Join Date
    Jun 2013
    Location
    Warsaw, Poland
    Posts
    11
    Just painted another one... Mustang this time - not for off-road because of the heating, but hope it looks cool


  15. #855
    RC Competitor
    Join Date
    Jul 2013
    Location
    Killadelphia, PA
    Posts
    67



    Before I lowered my Rusty...slippin n slidin in the rain next to my friends Stampede 4x4
    _ _
    Law #29: Plan all the way to the end.

  16. #856
    RC Competitor
    Join Date
    Jul 2013
    Location
    Killadelphia, PA
    Posts
    67


    Custom dremel job for cooling...and looks....abt a month ago when I first got my Rusty....also did the grill too...gotta start somewhere ya know
    _ _
    Law #29: Plan all the way to the end.

  17. #857
    RC Competitor
    Join Date
    Jul 2013
    Location
    Killadelphia, PA
    Posts
    67


    VVV Lowered VVV
    _ _
    Law #29: Plan all the way to the end.

  18. #858
    RC Competitor
    Join Date
    Jul 2013
    Location
    Killadelphia, PA
    Posts
    67













    Castle Creations Sidewinder SCT w/ 1410 3800kv Motor, Mostly RPM upgrades(Shock Towers, Front Bumper, A-Arms, Bearing Carriers w/ XO-1 bearings, TRX Castor Blocks, Wheelie bar & Shock Caps, Custom Front Grill and Rear cooling vents, Custom Lighting system w/ turn signals, dual-intensity brake lights and HID's/strobes, Lowered, the rest is stock for now..lipos & FlySky on the way..currently geared 29/76....there's always room for improvement
    Last edited by Real_Ghostly; 07-20-2013 at 02:45 AM.
    _ _
    Law #29: Plan all the way to the end.

  19. #859
    RC Racer
    Join Date
    Sep 2009
    Location
    United States
    Posts
    119

    Grudge's VXL Rustler

    A box stock 3707, torn down to individual components and rebuilt.















    • TRA3707 VXL Rustler
    • TRA2530 Bulkhead, Black
    • TRA3691 Gearbox, Black
    • TRA3722 Lower Chassis, Black
    • TRA3723 Upper Chassis, Black
    • TRA3727 Battery Hold Down, Black
    • TRA5862 Big Bore Shocks
    • TRA6845 Steering Bell Crank
    • RPM80522 Gear Cover, Black
    • RPM80912 Motor Guard, Black
    • RPM80332 Body Savers, Black
    • HPI86969 Thumb Screws
    • Axial 0185 M3x10 Set Screws
    • Axial 0187 M3x20 Set Screw
    • Axial 1045 M4 Wheel Nuts, Black
    • Axial 1105 Grey Aluminum Cone Washers
    • J Concepts 2139 Medium Body Clips, Black
    • Dubro 2335 Antenna Tube, White
    • STRC3640BK Hardened Hinge Pin Set (polished and then coated with Sullivan Dry Ice)
    • Pro Line 6104-00 Hard Anodized Hinge Pin Brace
    • Losi 45W Shock Oil, Front
    • Losi 50W Shock Oil, Rear
    • RockSmith Engineering Gear Jelly
    • Avid Revolution Bearings
    • Futaba R203GF S-FHSS Rx (4PL)
    • Pro Line 3391-00 Bulldog Body
    • Parma 40001 FasBlack
    • Pactra RC290 White Cover Coat
    • Tamiya PS55 Flat Clear


    Skate Park / On Road:
    • Pro Line 2728-03 Desperado Front Wheels, Black 2.8
    • Pro Line 2729-03 Desperado Rear Wheels, Black 2.8
    • TRA5578 Anaconda Tires (cleaned and treated with Simple Green)


    Off Road:
    • DE Racing SCT-FB Trinidad Front Wheels, Black, 2.2/3.0
    • DE Racing SCT-RB Trinidad Rear Wheels, Black 2.2/3.0
    • Pro Line 1176-01 Caliber Tires M2 (cleaned and treated with Simple Green and vented)


    Mods:
    • Removed 11mm of material from the chassis to accommodate the steering rack and achieve full throw.
    • Removed the body clip lug from the top chassis plate.
    • Reamed a 3mm hole into the chassis lip to access the servo horn screw.
    • Reduced the Bulldog wing height by a third.
    • Installed a small Lexan plate over the old switch mount with two M2x8 cap heads to protect and retain the Rx antenna.
    • Captured front and rear shocks via extended bolts and lock nuts.
    • Two opposing 1/16" vent holes in each of the Caliber tires.
    • Replaced plated hardware with Black Oxide.

    Attention to detail is an art fueled by obsession.

  20. #860
    RC poster
    Join Date
    Jul 2013
    Posts
    16
    Hello, I'm new to the Hobby Grade RC World but very happy I finally purchased one. I've done a lot of research and the Rustler was just the perfect Truck for me and apparently many others. My main reason for choosing Traxxas was for the plethora of aftermarket and stock support. My local hobby shop has Everything I need at this point. I've owned my Rustler for a few days now and so far I've installed a 14 tooth Pinion Gear from Robinson Racing and the Traxxas Wheelie Bar Mount, which makes a great Motor Guard. I did go ahead and purchase a 4amp charger since I feel I'll need to stick to Nicad and the Titan Motor for a bit of time. Maybe go through a couple of 12Ts before I go Brushless. Anyways, glad to be here.








  21. #861
    RC Competitor
    Join Date
    Jul 2013
    Location
    Killadelphia, PA
    Posts
    67
    [IMG][/IMG]

    [IMG][/IMG]

    [IMG][/IMG]

    [IMG][/IMG]

    [IMG][/IMG]

    [IMG][/IMG]

    [IMG][/IMG]
    _ _
    Law #29: Plan all the way to the end.

  22. #862
    RC poster
    Join Date
    Dec 2010
    Posts
    15



  23. #863
    RC poster
    Join Date
    Jul 2013
    Posts
    16
    Been out bashing.








  24. #864
    RC Racer
    Join Date
    Mar 2012
    Location
    CT
    Posts
    174


    My stickers totaly effect my aerodynamics

  25. #865
    RC Racer
    Join Date
    Mar 2012
    Location
    CT
    Posts
    174
    and some more!




    My stickers totaly effect my aerodynamics

  26. #866
    RC Racer
    Join Date
    Apr 2012
    Location
    Vic. Australia
    Posts
    168
    [IMG][/IMG]

    [IMG][/IMG]

    My friend's Bandit. my erevo.
    1/16 EREVO, 1/10 SUMMIT

  27. #867
    RC Competitor
    Join Date
    Apr 2013
    Location
    Georgis
    Posts
    61
    Ruster/STRC LCG

    Sent from my SCH-I535 using Tapatalk 4

  28. #868

  29. #869
    RC Enthusiast
    Join Date
    Mar 2011
    Posts
    44
    few pics of my new toy







    whats fitted

    Anza hinge pins
    Anza front pin brace
    Anza Aluminium caster blocks, 0 deg
    Anza heavy duty axles front and rear
    RPM A-arms front and rear (Rustler width)
    RPM shock towers front and rear
    RPM transmission case
    RPM bumper mount
    RPM slash rear bumper
    RPM adjustable body mounts
    RPM steering blocks
    RPM rear bearing carriers
    Slash front bumper
    Alturn 12kg servo
    Steel transmission gears and differential
    Losi 8 shocks
    Traxxas turnbuckles all round
    Traxxas rubber sealed ball bearings throughout
    Hobbywing WP-SC8 + EZRUN 3656
    STRC LCG chassis extension
    Pro-line Baja Bug body
    Pro-line Dirt Hawg II tires
    RPM Revolver 2.2 rims for Rustler offsets

  30. #870
    RC poster
    Join Date
    Jan 2013
    Location
    Norco, CA
    Posts
    17

    My first paint-job / Wrecking it at Urban MTB Park





    My Bandit VXL with my first custom paint job. I made a video with some massive jumps at the Colonnade Urban MTB Park in Seattle, WA. Here's a link to the video if you wanna check it out. http://www.youtube.com/watch?v=2g3kRWQQaww

    Let me know what you think!
    iJumpRC

  31. #871
    RC Qualifier
    Join Date
    Nov 2011
    Location
    Baltimore,Maryland
    Posts
    370
    I posted these a long time ago but had problems with photobucket and lost the link to them.
    This is my Rustler.








    Custom painted piece of Lexan to cover the bottom.





  32. #872
    RC poster
    Join Date
    Sep 2013
    Location
    New Carlisle, Ohio
    Posts
    15







    Plenty more to come I'm posting a video of the underbody's and light setup

  33. #873
    RC Competitor
    Join Date
    Sep 2012
    Posts
    72



  34. #874
    RC Champion
    Join Date
    Mar 2011
    Posts
    2,491
    Parts list:

    Extreme Racing G10 Chassis
    Anza Towers, Rear Carriers -1 deg, Caster Blocks, Hinge Pins and Tie Bar
    Proline Arms
    Traxxas GTR Shocks, Stock Steering Carriers, Stock Gearbox, 4x4 Axles, Stock Body Mount, Stock Bumper
    JConcepts Raptor Body
    Hot Racing Bell Crank
    STRC 14mm Hex Adapters
    Losi 320 Series Dish with Eclipse & KingPin, Shock Oils, Springs
    MMP, LRP 7.5turn & Cap, SMC 2S 5?00mah 70C, Savox 1258tg








  35. #875
    RC poster
    Join Date
    Jul 2013
    Posts
    16
    My first body




  36. #876
    RC Qualifier
    Join Date
    Nov 2011
    Location
    Baltimore,Maryland
    Posts
    370

  37. #877
    RC Competitor
    Join Date
    Sep 2012
    Posts
    72









  38. #878
    RC Champion
    Join Date
    Jan 2013
    Location
    SE Texas
    Posts
    1,178
    Had to update mine a little...



    RPM arms/bumper/gear case cover
    black Traxxas wheelie bar with rubber tiires on the stock black wheels
    Anacondas
    black springs
    Proline Powerstroke rear shocks
    Ofna 1:12 wing
    28t pinion
    posi unit for the diff
    and a few stickers.
    --
    "Dude,I almost had you"
    R.I.P Paul Walker

  39. #879
    RC poster
    Join Date
    Aug 2013
    Posts
    18
    Finally got my Rustler XL-5 back up and running after about 2 years of it being out of commission! Mods list is as follows:

    RPM Rear A Arms
    RPM Bumper
    Proline Agitator Rims
    proline Moabs
    Nitro Rustler front Hubs
    RPM Rear Hubs
    Aluminum Big Bores in the rear
    Castle Creations Sidewinder SV3
    Spektrum SR201
    HPI 4000kV Brushless Motor
    Proline Desert Rat Body (Just finished painting tonight)




  40. #880
    RC Champion
    Join Date
    May 2005
    Location
    Minnesota
    Posts
    1,020
    Kawasaki Rustler from a while ago. Little bit of green!



    With Trenchers

    MT Slash
    Stampede
    Stampede 4x4
    1/16 Erevo

Page 22 of 25 FirstFirst ... 122021222324 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •