Picco .26 Revo
Here we go!
Last edited by hybridshocker74; 10-30-2011 at 04:03 AM. Reason: add pic
Rockin' the 3.3 REVO
A little more bump for me...
Rockin' the 3.3 REVO
Last edited by Revomuncks; 11-11-2011 at 11:27 PM.
Ok, this is my latest masterpiece..
Yep... I got problems...****
Rockin' the 3.3 REVO
Encontro Da Galera!
Last edited by Revomuncks; 11-12-2011 at 10:14 PM.
Axial beadlocks and Trenchers with 18mm wheel extensions...and some lights
Last edited by Bruno.; 11-20-2011 at 07:03 PM.
OS 30.vg in my redo 3.3>>>>>>>>>>>>==========INSANITY
My Revo 3.3 and XTM Mammoth
Os .18TZ-P (bump Start only)
Tekno Sway bar & throttle servo mount, savox servo 220oz
Testing Badlands setup
new revo platinum edition body paint job
New Era engine mount
Motor Saver Filter
HPI BB Header
Pro-Line VTR 4.0
Tekno Wing mount
Tekno Sway bar
Tekno Servo mount
+12mm offset 17mm hubs
Ofna T-starter Box
gearing: 38/15 (Stock)
Shock oil: 50wt
Fuel: Torco 30% Nitro
OS P3/P5 Turbo Plug
Average Temp: 225 F
Last edited by Revostinum.18; 12-02-2011 at 01:17 AM.
A day of bashing. Have more pics but photobucket is a pain
Last edited by Double G; 12-09-2011 at 12:54 PM. Reason: removed offensive word
Red dot revo rustler with 3.3 neu/MMP mini revo
After my first bashing session the shell tore apart the front and rear body/bumper mounts!!
Going to start a Jeep tube body this week...
Last edited by Revomuncks; 12-08-2011 at 10:49 PM.
Last edited by BrandanL; 12-20-2011 at 10:04 PM.
Well, for Christmas my favorite girl picked me up a new body for my Revo. Since I was a little too impatient to wait until after the holidays to get some real paint, and what not, I shot it with Krylon Camo. I learned some valuable lessons during this process, so I am actually glad I did it the way I did. There are still some things that I need to do like redo the bumpers. But that's what this is all about, a little here and a little there.
Here`s a few pics of my 1st Revo, picked it up 2 days after Christmas, cheeeeeeap!!!!
Kid I got it from couldn`t get it started after letting it sit for like 6 months. Got it home, pulled out the engine, EZ start, and Tank, spent a couple hours cleaning it (while batteries charged) threw it back together, primed the carb and what do ya know, it worked!! Went out to LHS today got a 3.3 engine (on sale) front bumper and lower rear arms, LHS carries squat for Revo stuff ARGHHH didn`t want to make a trip across the city to Non-LHS ;-) Tomorrows another day though, New Body and Alu-carriers in the works.
Thanks for looking
if youre nice ill let you see her naked.
I'll post some pictures by my self also, they aren't so new, but haven't shown them yet.
Red GTR -shock bodies, GH spring retainers, GH upper caps, GH preload adjusters, GH shock rod ends
Screw on the left: Mugen titanium countersunk screw, screw on the right: stock button head (steel?) screw.
One shot.....One kill, no exceptions
Basically fresh out of the box, added sway bar kit and rear wing and on board gauge
Here is my Revo 3.3 with all the platinum upgrades
Here's mine, os .30vg with a big block buku pipe.
Can you pass me another screw?
This is my buddy's girlfriends revo i painted. A copy of her uncle butterball's truck.
Pretty much stock, New 3.3 engine, my 1st shell and a couple other slight modifications. Has been too cold here to run it though, can`t wait for a week long chinook to roll in and melt some snow so I can @ least break it in.
Got a Slayer for Birthday, but really wanted another Revo so why not convert it to a Revo down to the Opti Drive and reverse Minus wheels and tires of course...
Last edited by bassemj; 01-31-2012 at 10:44 PM.
Went out to the dunes this morning.
Best in motion pic I could get with the receiver and camera in both hands.
Last edited by jk6672; 02-08-2012 at 01:42 PM.
I got a roller, had to tear down to clean it...
Now ready to test drive....
Signing off from
Left of Area 51.
Last edited by Double G; 02-29-2012 at 05:56 PM. Reason: merge
I put my Tekno battery/RX and servo mount on chassis. I also decided to do a little modifications to the RX box. It’s still a work in progress, I still need to fill in with some JB weld and sand is smooth. Here are some pics.
RX top with hole cut out for battery recharge plug
piece from bottom of traxxas housing
test fitting to see if any clearance problems
painted roll cage orange, and picked up some white a arms to dye orange.
Dyed my A-arms orange today and installed steering servo and servo horn: