Here is mine almost all alluminum! and a sirio
Here is mine almost all alluminum! and a sirio
project Madd Maxx:Sirio 3.0 T-Maxx engine, Ritter Pipe, Big Bore shocks, Fastlane alluminum: bulkheads, a arms upper lower, shock towers, MIP cvd's, alum. fuel tank, alum. steering knuckles, Outback wheels & maxx masher tires, Early 50's chevy body
Spent a day at the local skateboard park, broke my rear right bulkhead, but it was fun..... http://community.webshots.com/album/110292372jibIsX
This is my first paint job. I was inspired by the WEEE Maxx on this one, I thought it looked well cool. Anyway, I'm happy with the result. I've got the new Ford F 150 body from proline coming in the week so I will have to think of a design to do on that one.
Second attempt at painting w/rattle-cans: came out better than I expected.
Very light (but more than intended) grape pearl backed w/black for base...grape & silver for flames. Forgot to upload the upraged chassis shots...later.
jump, crawl, climb, or race...just go!
E-maxx & T-maxx with very few stock parts
Here are some pics of my Maxx just click the link below
email me at firstname.lastname@example.org
pics @ http://community.webshots.com/user/adey2004
Gixer, Gixer Jnr & the Misses
See our T-Maxx 2.5 Pics at http://community.webshots.com/user/gixermaxx
Let up for a second, and that's where you'll finish.
here is my T-maxx , with alot upgrade parts.
Last edited by OvalQueen; 01-25-2004 at 12:54 PM.
The winter project is finished. Where's SPRING???
Sirio .18 Engine, RPM A-Arms - Shock Towers - Braces - Bumpers, Proline Powerwagon Body, Imex Trail Dawgs, TA Shocks w/ Trinity Springs, Carbon Fiber turnbuckles, Steel swingshaft CVD's, Hitec Servo's, Temp gauge and failsafe and misc. parts...
Last edited by OvalQueen; 01-26-2004 at 12:45 AM.
Fantom .18| Hitec 645 Servo| RPM A-Arms| RPM Shock Towers| RPM Skids| RPM Bulkhead Braces| Proline H2 Body| F350 Washington Redskins Body.
Here is my SportMaxx, I just got it. So far, just the 2 speed upgrade and a new body are all I have done to it. More hop-ups are coming though.
Pro-line early 50's Chevy body...
Here is my G/F's (now known as Dirtprincess) SportMaxx. Bone stock, She's into cows...
Here's our happy little RC workshop...
I'll post again when I trick 'em out.
Last edited by jrfink; 01-27-2004 at 09:25 PM.
This is my Basher Maxx. It's an old Pro .15 with RPM arms and an OS .15 CV-X Hyper. My Dad and I powder coated the chassis and Center skid. Enjoy!
Last edited by OvalQueen; 02-04-2004 at 01:31 AM.
Last edited by OvalQueen; 02-08-2004 at 12:53 AM.
Drive fast and take chances.
check the new photos http://community.webshots.com/user/teamchrome
here she is....hope you all like!!
im very proud of her!!!!!!!!!
she has alot of time, and effort put into it!!
Last edited by OvalQueen; 02-08-2004 at 12:29 PM.
Here is my latest obsession.
More Pictures can be found here!
Here are the specs as I recall them:
FullForce RC 7075 Spider Racing Chassis
Pro-Line Crowd Pleazer body
Pro-Line suspension kit with Titanium links
Orange shock soxs
cs-70 mg ball bearing servo for steering
ball bearings in the steering bell cranks
hex screws on lower half of truck
venom racing 6 cell hump pack
Forward only conversion
16 tooth clutch bell
No bumpers or bumper mounts
trimmed aluminum skids
pro .15 engine with MIP stinger pipe (soon to be replaced by epic .18)
Venom Racing Fail safe
Pull start conversion
Heavily modified stock tires
plasti dipped servos & electronics
I still have these things to put on it yet:
team losi blue springs
40 and 50 wt shock oil
big bore shocks
epic .18 engine
hobby shop nj big tube header
motor saver airfilter
18 tooth clutch bell
70 tooth spur gear
Pro-Line Velocity Rims died Orange
Pro-Line Bowtie Tires
Last edited by OvalQueen; 02-09-2004 at 12:38 PM.
It's all stock except the body The rear bulkhead broke on my first run with the body on and cracked it
heres some pics
DACE/Ue predator chassis, predator lightweight bulkheads, rpm arms, sporttraxx/rib dawg's, airtronics radio, titanium hingepins/turnbuckles, 2-speed, 24/68 gearing, motorsaver airfilter, sirio pipe, fullforce reciever tray, and some other internal mods.
just over $410 invested for everything including truck.
Last edited by OvalQueen; 04-27-2004 at 05:13 PM.
Mine dosen't have many mods.... I'm about to install a rd logics pipe later on this week.. I'll get some pics later..
Last edited by OvalQueen; 02-24-2004 at 12:13 PM.
Calm down. It's not me, it's you!!!
Take a look
Weight: Low 8s, High 7s
Dace Mfg. Predator Race Chassis
UE KnuckleHead Shock Towers
UE RacerX 4 shock setup Suspension
JR Synthisized Radio System
Trinity Cooling Head
Dubro Fuel Filter
Dynamite Fuel Line
Hardcore Titanium Skids
Trinity 1200mAH Hump Pack
Hitec Digital Steering Servo (5645)
Last edited by carpenter don; 02-26-2004 at 07:10 PM.
Check out my T maxx gallery.
Last edited by OvalQueen; 04-27-2004 at 05:16 PM.
My new T-Maxx. It is used but new to me. I have not yet ha it on the road but am loving MTing so far just learning all the ins and outs. Let me know what you guys think!
Old links are now dead.
Here's the images I've posted earlier.
Here's some shots of my truck as it currently is:
Last edited by mike505; 03-09-2004 at 02:44 PM.
Be vewy vewy quiet,
I'm hunting trolls...
I enjoyed a nice day at the park with the Dirtprincess. We had a blast and got a few cool action shots.
Here's a good "in your face" shot she took of my Maxx
I caught her pulling a nice wheelie
She's getting to be a better driver
and she's gotten good with the camera
Yeah, I know.... bad idea
It was a good day, nothing broke on our Maxxes. We tried.
here is my t-maxx dodge hemi with palmetto state theme (sc)
3.0 sirio, Traxxas foc, Traxxas spool, BB pipe, nova pro race cooling head, dynamite CVD's, fail safe, MS air filter and RRP gear in the rear.
This is my brothers 1st gen Maxx
Hippopotomonstrosesquippedaliophobia - Fear of long words
My bro posted pics of my truck one here before, but I did some upgrades since then.
These pics are before I screwed the whole front end up. Unfortunately I don't have any pics of the wreck.
Got some more sick action shots for all ya'all's enjoyment. Me and some friends had a blast today.
Maxx trucks rule.
Last edited by OvalQueen; 04-27-2004 at 05:18 PM.
I can resist everything except temptation. Go fast...... Crash hard!!!
Last edited by OvalQueen; 03-23-2004 at 11:41 PM.
For the dirt: T-Maxx, Fantom .18, all RPM. RC10T3. RC10GT. For the street: Power Racing XR-80, 1/8th scale, W/stock .27. Mugen MTX-3 W/O.S. 18TZ. Yokomo Gt-4 W/Novarossi CT12. For the water: Traxxas Blast deep vee boat. Radio: Airtronics M8 with the Spektrum system.
T-maxx- XTM 24.7 engine, XTM blue conversion kit, alum front arms, trinity blue springs, big bores, FOC wide offset rims. Hummer, T-maxx, Cadillac Escalade bodies. Rustler brushless novak motor system
Here are some recently updated pics...I got Big Joe's on my Maxx!
Hope you guys like it!
Last edited by OvalQueen; 03-30-2004 at 12:35 PM.
Follow Me Down!! XTM .21 Con., Wasp .26, RPM Arms, MIP Clutch Shoes, Metal Tranny Gears, RR Spur Gear, Big Bore Shocks, Al. Bulks, Al. Wheel Hubs, Big Joes, Ofna F. S., M. S. Air Filter, Fuel Filter, MX3 Radio, Hump Pack, Roto Start, Hitec 645MG Servo.