Page 28 of 29 FirstFirst ... 1826272829 LastLast
Results 1,081 to 1,120 of 1138
  1. #1081
    RC Racer
    Join Date
    Feb 2011
    Location
    N.C.
    Posts
    160
    used to be a classic maxx, i think
    Last edited by jason draughn; 01-12-2013 at 10:12 AM.

  2. #1082
    RC Qualifier
    Join Date
    Dec 2011
    Location
    Woodward, OK
    Posts
    419
    Here is my old 2.5 rescue maxx. It was a gonna be thrown in the thrash. New p/s, servos, hump pack, driveshafts, 2.4 radio, and body. Just like new


    sent from my not so smart, smart phone
    T-maxx 3.3
    Rusty 2.5r
    Summit VXL
    Nitro 4-tec

  3. #1083
    RC Qualifier
    Join Date
    Dec 2011
    Location
    Woodward, OK
    Posts
    419
    And here is my 3.3 max, dirty as usual



    sent from my not so smart, smart phone
    T-maxx 3.3
    Rusty 2.5r
    Summit VXL
    Nitro 4-tec

  4. #1084
    RC poster
    Join Date
    Jan 2011
    Posts
    9
    Here's my 1999 T-Maxx - one of the first off the line, still has original engine, original piston and sleeve - haven't run too many tanks through it, but they've been hard ones!

    Was in pieces on my basement desk for six years after my daughter was born - just finished completely rebuilding it - stripped it down to the last screw and completely cleaned and reassembled, put on a bunch of aftermarket parts I had saved up. Now just gotta fire it up again! (but not sure if I want to get it dirty)

    https://www.box.com/s/3vjlm50ctdge3xv8m7qh

  5. #1085
    RC Competitor
    Join Date
    Jan 2013
    Location
    Garlic Capital
    Posts
    50
    My newly widened pro.15 maxx. Used RPM and 3.3 parts.


  6. #1086
    RC Enthusiast
    Join Date
    Sep 2012
    Location
    Berglangenbach, Germany
    Posts
    31






    This is my T-MAXX that I took from stock to better-than-stock.

    I upgraded to the Revo wheels and Talon tires, Big bore shocks and spring set, covered with socks.

    I suffered a broken bulkhead so, the plastic stock bulkhead was replaced with an aluminum one. I also replaced the skid plates and bumpers to the anodized green aluminum. RPM arms all around.

    I was disapointed too many times by a dead EZ START battery, so I pulled out the system and went to pull start. New green fuel lines and dual 2075 servos complete under the hood upgrades.

    Topped the body with a HPI Jeep Rubicon body in Candy Orange and gave the wheels some orange color to match. There's a trail of green glitter in the paint to make the image of flames on the good and side panels.

  7. #1087
    RC Enthusiast
    Join Date
    Mar 2005
    Location
    italy
    Posts
    47


    [IMG][/IMG]
    Last edited by Double G; 02-09-2013 at 12:16 PM. Reason: merge, they can be in one post

  8. #1088
    RC Enthusiast
    Join Date
    Mar 2005
    Location
    italy
    Posts
    47

  9. #1089
    RC Qualifier
    Join Date
    Jul 2004
    Location
    Evansville, IN
    Posts
    305
    Here is my tmaxx after rebuilding it off and on for a year. I bought it from my neighbor for $50 and adding my 2.5, replacing broken or wrong parts and just fixin her up.



    Been on here for a while but forgot my original username.

  10. #1090
    RC Competitor
    Join Date
    Jan 2013
    Location
    Garlic Capital
    Posts
    50
    New pic with black painted wheels.

  11. #1091
    RC Enthusiast
    Join Date
    Nov 2012
    Posts
    24








    Last edited by Fishstickz; 02-17-2013 at 05:55 PM.

  12. #1092
    RC Qualifier
    Join Date
    Apr 2011
    Location
    Northern Illinois
    Posts
    292


    The best thing about Groundhog Day??? Bill Murray.

  13. #1093
    RC Enthusiast
    Join Date
    Nov 2012
    Posts
    24

    T-Maxx Gallery Picture clip enjoy!




    Instead of looking through the 28 pages I just took a decent picture from each post to make a clip of your babies! I could only copy pictures that where on the site, if it was linked I dont have your truck included sry.

  14. #1094
    RC Racer
    Join Date
    Sep 2012
    Posts
    197







    First one is mine, second one is my fiance's, and the third one is my custom short course maxx, more pics can be seen in my build thread.
    T-maxx 2.5 | T-maxx 3.3 | T-maxx pro.15

  15. #1095
    RC poster
    Join Date
    Feb 2013
    Posts
    2
    Heres mine! more bolted on than i care to list or try to figure out what it cost lol

  16. #1096
    RC poster
    Join Date
    Apr 2012
    Location
    Burton, OH
    Posts
    13
    i got a Traxxas S-Maxx TRX 2.5 and here is my last year picture video and here is the remake picture video and yes it was last year and enjoy

  17. #1097
    RC Racer
    Join Date
    Mar 2013
    Location
    Rio Rancho new mexico
    Posts
    175
    here is an action shot of my tmaxx .15 it had been sitting for 10 years after my dad broke it in! so we cleaned it up and replaced the necessary stuff and here it is running like a champ! i recently purchased a trx 3.3 a ofna pico .26 another trx .15 metal bumpers metal skid-plates .15 transmission 3.3 transmission new tires with black rims new servos new shocks new shock covers ez start system new remote and receiver new buggy tank and buggy tires all for 65$ on craigslist witch should i install pico .26 or trx 3.3? . here is the tmaxx
    and more
    http://s1340.photobucket.com/user/na...ibrary/?page=1

    [/IMG


    black rims painted theme myself


    this truck was sitting for 10 years after my dad bought it and barley broke it in (3/4 of a quart through it) so i found it in the garage and knew i had to drive it i have invested about 100$ in total 40$ for gas and glow plug and 65$ for the bumpers skidplates 3 engines (trx3.3 ofna .26 trx.15) and many other parts my body is cracked from a crazy jump but havent broke anything else other then a couple spur gears and a pull-start really enjoying this as a hobby


    sorry im a noob and having trouble posting pics so once again here are the pics http://s1340.photobucket.com/user/na...ibrary/?page=1
    Last edited by Double G; 03-29-2013 at 05:54 PM. Reason: merge

  18. #1098
    RC Qualifier
    Join Date
    Mar 2012
    Location
    Edmonton, AB Canada
    Posts
    474





  19. #1099
    RC Enthusiast
    Join Date
    Nov 2012
    Posts
    24
    This is a 4910 with a TRX 3.3 & tuned pipe, robinson spur gear, OFNA Violator Fuel Tank, TQi 2.4Ghz, K&N type Air Filter, E-maxx Driveline, Diffs, Axles, Knuckles,Aluminum shocks with Progressive Rate Shock Springs, RPM Maxx Titan Offset Blue Rims, TEKNO RC Adjustable Wing Mount, RPM skids & bumpers. still have servos and the hump pack on the to buy list. Bought the truck in may of 2012, added all aluminum hopups $500 worth and got schooled. I removed all the aluminum - the servo saver guard, everything listed above is new. Pretty much bought 3 trucks to get what i wanted. Plan to break the truck in hopefully this weekend.




  20. #1100
    RC Racer
    Join Date
    Mar 2013
    Location
    Rio Rancho new mexico
    Posts
    175
    i finally got the hang of posting picture so here is my tmaxx


    the new bumpers (got rear and front) also added shock covers.



    painted the rims myself



    2001 tmaxx, 2012 1/16 erevo vxl

  21. #1101
    RC Racer
    Join Date
    Dec 2012
    Location
    western Australia
    Posts
    217
    my 4907 maxx. rpm a arms, true track rear, rpm shock towers, rpm bulkhead braces, rpm bumpers, rpm front hubs, traxxas steel cvd's, hitec steering servo, ofna violator tank, hpi hump pack, revo wheels and tyres, 17mm hubs, slipper clutch mod, big bore shocks, integy progressive springs, savage shock socks, upgraded toe links and drag link, exhaust coupler.

    trying to upload other pics but wont upload to image shack





    Last edited by Double G; 04-13-2013 at 09:24 AM. Reason: merge
    modded 3906 e-maxx

  22. #1102
    RC Competitor
    Join Date
    Mar 2013
    Location
    iowa
    Posts
    68
    Here is the best shots of my Tmaxx. these were taken by fiance.










  23. #1103
    RC Enthusiast
    Join Date
    Mar 2013
    Location
    HERP,DERP
    Posts
    45
    Throwing rooster tails staying outta hay bails

  24. #1104
    RC Enthusiast
    Join Date
    Mar 2013
    Location
    HERP,DERP
    Posts
    45
    [/QUOTE]

    thats sick!
    Throwing rooster tails staying outta hay bails

  25. #1105
    RC Racer
    Join Date
    Oct 2012
    Location
    Eugene, Or
    Posts
    129


    T-Maxx 3.3/E-Maxx/30th Digger/1:10 Summit/Rustler

  26. #1106
    RC Racer
    Join Date
    Dec 2012
    Location
    western Australia
    Posts
    217

    my novelty tyres haha
    modded 3906 e-maxx

  27. #1107
    RC Champion
    Join Date
    Dec 2011
    Location
    Latitude:N 37 15' 47.0002" Longitude:W 115 47' 34.8713"
    Posts
    2,435
    Tmaxx 4910:
    -Traxxas center CVD's w/extended cups
    -17mm hex's
    -proline badlands tires on desperado 1/2" offset rims
    -rpm a-arms all around
    -rpm bumper
    -aluminum engine mount
    -GH aluminum bulks front and rear
    -GH aluminum skids front and rear
    -GH aluminum chassis braces
    -GH aluminum center skid
    -aluminum shock towers
    -aluminum traxxas bigbores, 50w oil, integy springs
    -upgraded chassis
    -t-pro 946 165oz/in metal geared steering servo
    -sprung body posts
    -ofna 145cc violator fuel tank
    -trx 3.3 with traxxas "R" dual chamber pipe, and high flow filter
    -4909 3.3 steel geared "RR" transmission, FOC, rit dyed black, 2.5 brake disk inplace of three shoe pads for the slipper clutch
    -e-maxx diffs, 50k front, 30k rear
    -RCbest steel cva shafts in the rear
    -prografix 4911x body
    -body clip leashes
    -cut holes in body and replaced with nylon screen
    -turn down on exhaust tip
    -shock covers
    -direct pull throttle




    Last edited by kuskye25; 04-20-2013 at 10:50 AM.
    Traxxas is good, but so are other Manus

  28. #1108
    RC Turnbuckle Jr. Snook Man's Avatar
    Join Date
    Jan 2008
    Location
    Sugar Hill Ga.
    Posts
    8,340
    No slipper/tall gearing/power = broken parts.

  29. #1109
    RC poster
    Join Date
    Mar 2013
    Posts
    6
    Here's some pics of my mostly stock T-Maxx 3.3. Just finished painting up my first body ever.





    Rustler, Slash 2wd
    Slayer Pro, Revo 3.3

  30. #1110
    RC poster
    Join Date
    May 2013
    Location
    Pensacola, Fl.
    Posts
    1
    Here is my Maxx http://i232.photobucket.com/albums/e...508_211259.jpg
    http://i232.photobucket.com/albums/e...509_191759.jpg

    Project is a work in progress. Many more upgrades to come.

  31. #1111
    RC poster
    Join Date
    May 2013
    Posts
    1
    Here are a few pics of my Tmaxx, and a few of it in action.







  32. #1112
    RC Competitor
    Join Date
    Feb 2013
    Posts
    77
    New wheels from proline F11's And original traxxas tires
    Last edited by Tonda; 05-16-2013 at 04:48 PM.

  33. #1113
    RC Qualifier
    Join Date
    Mar 2013
    Location
    New Hampshire
    Posts
    480
    Here it is:

    Last edited by Double G; 08-20-2013 at 11:49 AM.

  34. #1114
    RC Racer
    Join Date
    Sep 2012
    Posts
    206

    3.3 TMaxx

    Haven't broken in the motor since converting to 3.3 chassis ans motor.

  35. #1115
    RC Competitor
    Join Date
    Dec 2011
    Location
    Kernersville, NC
    Posts
    51
    Here's my 4907 Maxx

    3.3, aftermarket filter, Traxxas Resonator, RPM arms, aluminum bumpers, aluminum servo protector, deep dish chrome wheels and brand new Proline Shockwaves that I haven't got to try out yet.






  36. #1116
    RC poster
    Join Date
    Aug 2013
    Location
    Thomaston,ct
    Posts
    3
    I've had alot of trucks in the past 10 years












  37. #1117
    RC poster
    Join Date
    Jan 2012
    Location
    Mechanicsburg, Pa
    Posts
    16
    heres an update on my tmaxx....aint been on here in forever....just ordered blue rpm bulkheads, bodybounts, bulkhead braces, and some misc other stuff this week to rebuild over the winter to be bashed while it still looks good...

    Revo 2.5R- TMAXX OS .18 - NitroSport 2.5R

  38. #1118
    RC Racer
    Join Date
    May 2013
    Location
    Attica,IN
    Posts
    189






    T-MAXX 2.5R
    Slayer Pro
    Revo
    Monster Pirate

  39. #1119
    RC poster
    Join Date
    Dec 2012
    Location
    DeSoto, MO
    Posts
    9
    Here is a video of my T-Maxx 2.5 it has a trailer hitch and light hook ups, I'm still working on the trailer lights!


    Tmaxx2.5,CF Funny Car,Nitro Pede,Geico, 73" Mystic

  40. #1120
    RC Enthusiast
    Join Date
    Oct 2013
    Posts
    23




    Last edited by corey0721; 11-21-2013 at 08:48 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •