Page 9 of 29 FirstFirst ... 789101119 ... LastLast
Results 321 to 360 of 1143
  1. #321
    RC Qualifier
    Join Date
    Oct 2005
    Location
    MN
    Posts
    260
    Here is my pride and joy:



    T-Maxx 3.3 - THS Racing pipe, MIP center CVD's, 2500mah battery pack, and an RC Solutions Roll cage. Wanna Race?

  2. #322
    RC poster
    Join Date
    Jan 2006
    Location
    Smithfield, PA
    Posts
    7
    Here is a link to some pictures of my s-maxx. It has integy piggyback shocks, integy chassis brassis, shock towers, bulkheads, skid plates, and bumpers. It also has RPM arms, and custom paint.

    This is my first truck, and I am hooked. I plan to paint a new body with RC Paint rather than krylon, so the paint wont melt off the body.

    http://www.teamraceway.com/photos.as...ge=ankrom1.jpg
    -A Champion Is Someone Who Gets Up, Even When They Can't -

  3. #323
    RC Champion
    Join Date
    Jan 2001
    Location
    Fresno, CA
    Posts
    2,008
    my new t-maxx YEAH old t-maxx .15 pro i have put on the rc raven roll cage, racing chassie, and tranny skid plate. motor saver air filter and traxxas blue tune pipe. and the carnage of a run away now i got a fail safe.

    Pics no longer available, links removed.

    now after the run away






    Last edited by Nitronaught; 12-20-2011 at 09:16 AM. Reason: clean up dead links
    3.3 t-maxx, O.S. .18TM t-maxx, HV brushless e-maxx

  4. #324
    RC Racer
    Join Date
    Jan 2005
    Location
    Dallas, TX
    Posts
    113
    Still upgrading...such a slow progression...




  5. #325

  6. #326
    RC Qualifier
    Join Date
    Jan 2006
    Location
    North Fort Myers FL.
    Posts
    489
    Here's r/c_driver999's T-maxx


    Stock REVO Jato List of hop ups: New Era roll bar New Era front and back a arms Traxxas red turnbuckles Futaba Magnum 2PL Futaba S3003 steering servo Futaba S3003 Throttle servo
    R142JE Receiver.OS .18 TZ!

  7. #327
    RC poster
    Join Date
    Sep 2005
    Location
    Lapeer Michigan
    Posts
    19

  8. #328
    RC Enthusiast
    Join Date
    Jan 2006
    Posts
    43
    Here is my truck


  9. #329
    RC Qualifier
    Join Date
    Aug 2004
    Location
    Vancouver B.C
    Posts
    563



    [Os .18 TM] Traxxas Big Bore shocks, Hitec 645mg, RPM A-arms/Shock Towers, ACNCM Bulks, FLM chassis, THS racing pipe. [Mini-T] Mamba 6800kv, Hs-55, Dirt hawgs, MIP Black Cvds, Titanium turnbuckles, GPM aluminum shock tower, Magnum 2pl

  10. #330
    RC Competitor
    Join Date
    Jan 2006
    Location
    Marietta, GA
    Posts
    81
    Mine and my wifes.
    www.bigslikpokertables.com

  11. #331

  12. #332
    RC Qualifier
    Join Date
    Jul 2005
    Location
    kings park, ny
    Posts
    594
    Originally posted by another_user
    Here's r/c_driver999's T-maxx


    thats not a tmaxx i hate to have to tell u its a smart tech.
    tmaxx-rc raven chassis and skrew kit,MIP pipe kitW/header, integy mrs4 piggys(4), trinity 8.5pd springs, rpm arms, rd logic cvd's, xtm xlb wing and mount, acncm head, proline steering kit, hitec 645mg, 3.3 skids and chassis breaces, xxx main skull center skid,crowd pleaser, and maximizer beadlocks wraped in zombie maxx's.

  13. #333
    RC Competitor
    Join Date
    Nov 2005
    Location
    houston texas
    Posts
    93

    my sport maxx now

    OS18TM,FORWARD ONLY,BEADLOCKS,IMEX KROCKS,MUGAN WING AND CUSTOM MOUNT,AIRTRONICS SINGLE STEERING,RPM C/ARMS.INTEGY FUEL GUARD,FRONT AND REAR SKIDS,FRONT AND REAR BUMPERS,MOTOR SAVER FILTER,ALOT MORE AND MORE COMING

  14. #334
    RC poster
    Join Date
    Feb 2006
    Posts
    3

    2,5 and 3.5

    http://i48.photobucket.com/albums/f2...x/Imag0009.jpg




    Please keep all images to a width of 600 pixels or less. To do this, you must edit the image using an image editor before you upload the picture to your host.

    I have changed the images to links so that people don't have to scroll to read the thread.

    Mis'
    Last edited by Misbehavin'; 02-27-2006 at 03:48 PM.

  15. #335
    RC Qualifier
    Join Date
    Feb 2005
    Location
    Dayton, Ohio
    Posts
    330

    No 3.3's Yet!

    Heres one, Enjoy





    OPS Powered Mugen MBX5T, Predator build2

  16. #336
    RC poster
    Join Date
    Sep 2005
    Location
    Lapeer Michigan
    Posts
    19




    My Truck is the green one and the other is my buddys truck
    Last edited by arceeguy; 03-04-2006 at 05:56 PM.

  17. #337
    RC Competitor
    Join Date
    Aug 2005
    Location
    Sayre,Pa
    Posts
    69

    LET IT EAT ........... T-Maxx 2.5/w.18tm, Savage 25/Stock, HB LSP/w.27 Picco, T-Maxx 3.3/w.18TM EB mod, Savage X

  18. #338
    RC Enthusiast
    Join Date
    Jan 2006
    Posts
    43

    GO SABRES!!







    Last edited by arceeguy; 03-04-2006 at 06:00 PM.

  19. #339
    RC Champion
    Join Date
    Nov 2005
    Location
    St. Louis
    Posts
    1,040



    "Speed, I am speed."

  20. #340
    RC Enthusiast
    Join Date
    Jun 2003
    Location
    Western Pennsylvania
    Posts
    20
    Here's mine.





    Brand New OFNA Ultra MBX Comp...Brand New T-Maxx 3.3...Brushless Mini-T Fully Built...Rustler-Old

  21. #341
    RC Competitor
    Join Date
    Feb 2006
    Location
    pensacola,fl
    Posts
    69
    stay away from parking stobs they cause you money

  22. #342
    RC Champion
    Join Date
    Dec 2004
    Location
    right here
    Posts
    2,645

    my new 3.3 t maxx

    i know everyone has seen one before but i still like to show off my new toy

    #3 R.I.P DALE you are missed- when you are old enough to vote then you can tell me what i should or should not do. traxxas models - 4wd s maxx w/3.3 axles & carriers,turnbuckles: 1st gen revo w/ a 3.3: blast boat: t maxx 3.3: nitro 4 tec: nitro rustler. "ME" for president.

  23. #343
    RC Qualifier
    Join Date
    Jun 2005
    Location
    Carter Lake, IA
    Posts
    326
    Garage- 2006 Traxxas T-MAXX 3.3- THS Racing curved Tuned pipe, Ofna 1400 mAh Hump pack, Brake mod, Mugen wing stay, braces, and ofna wing. soon to come powerstroke shocks, full VBS, next 3.3 will be EB MODDED!!!!! 4-tec- just for family get togethers. Revo 3.3, going to get it from hobby store next weekend!!!

  24. #344
    RC Competitor
    Join Date
    Apr 2005
    Location
    Pittsburgh, PA
    Posts
    69
    my maxx after a hard days of bashin
    Thats my back

    Thats the back again

    DUCT TAPE!

    Too much airflow can't be bad.

    Yeah but nose dives are.


    Where all the fixin is done
    2.5 Tmaxx: Blue Aluminum Tuned Pipe, Airtonics 94358z/ERG-VB Servo, Pro-line 2 Sand Paw tires, 4 Road Rage tires, and 6 dish rims, Front/Rear Red Aluminum Skid Plates, Front Blue Aluminum A-arms, 8 Hotbodies Blue Threaded Shocks.

  25. #345
    RC Enthusiast
    Join Date
    Nov 2005
    Location
    New Jersey
    Posts
    22

    My 2.5...

    Details are in sig...


    *****

    *****

    *****
    Last edited by xm_202_fan; 03-18-2006 at 11:26 AM.
    T-Maxx with Proline Powerstrokes; ACNCM skids, braces, & bumpers; MIP complete CVD's; OS .18TM

  26. #346
    Registered User
    Join Date
    Feb 2006
    Location
    Florida
    Posts
    15
    this is my stock t-maxx just bought it today and have one tank of fuel left before i can bash it.







    Edited to rearrange pics so that users don;t have to scroll thread sideways to read it.

    Mis'
    Last edited by Misbehavin'; 03-19-2006 at 07:58 AM.

  27. #347
    RC Racer
    Join Date
    Feb 2006
    Location
    Kingston Ontario
    Posts
    230
    Here are a couple pic's of my new Tmaxx 3.3







    And just over 24 hours later





    Hope you all enjoy.....

  28. #348
    RC Turnbuckle Jr. Nitronaught's Avatar
    Join Date
    Oct 2005
    Location
    South Florida
    Posts
    18,463

    I call it the Nitromaxx





    Upgrades include
    RC Raven racing chasssis and roll cage (was full cut to a half)
    Lunsford Racing titanium turnbuckles and hinge pins
    RPM bumpers, skid protectors, A-Arms, and offset rims
    Traxxas Big Bores and Powertune head and Blue Tuned pipe and FOC
    OFNA micro fail Safe and 1/8 buggy filter
    FLM Bulkheads
    MIP header
    Proline steering kit,MAXX Masher tires, Crowd Pleaser body
    Hitec HS5645mg steering servo
    Blitz 1400mah hump pack
    Pull start and Glow igniter
    I think that's it for now.
    Founder of H.U.A.
    Hop Ups Anonymous

  29. #349
    RC Competitor
    Join Date
    Mar 2006
    Location
    Albany. ny
    Posts
    52

    Giggity Giggity

    Got them this past tuesday..





    It needed a friend..(blue one is mine )

  30. #350
    RC Racer
    Join Date
    Mar 2002
    Posts
    182

    here is mine it has P2 acncm skeleton dynamite steering kit with ball bearing and integy pbacks....

  31. #351
    RC Enthusiast
    Join Date
    Mar 2006
    Location
    Northern Minnesota
    Posts
    24

    My Vice




    This are some old pics. Since then I have add big joes, alum skids, alum rear bulkheads, sirio .18, big bore shocks, and alum chassis braces.
    Being clever means nothing with no one listening..... If it aint broke, drive harder......... T-Maxx: HCR Suspension arms, Trinity reciever pack, Alum front bulkheads, MIP CVD's, JR High Torque Steering Servo, Alum skids, Big Joe 40's and Velocity wheels, and many more.....

  32. #352
    Tenzo_Racing
    Guest



    Here is my T maxx 2.5: O.S. 18tm, custom built chassis, ofna failsafe, Ofna 9.5 pro fuel tank, 3pk radio, Custom Built 2500mah receiver battery pack, RPM bulkhead braces, RPM chrome front and rear bumper, ACNCM chassis braces and front bulkheads, FLM rear bulkheads,4 RRP silver shock bodies, 4 Shiny MIP shockbodies and 8 MIP golden shock shafts, Lundsford titanium turnbuckles and hinge pins, Proline steering kit, Hotbodies "Dagger" wheels and sportmaxx tires, revo spec driveshafts, Full force carbon fiber disc brake with Hardcore Titanium brake pads and many many more. All topped off with a Proline Crowd Pleazer 2.0 body.

    upgrades to come: TRX3.3 (to match my REVO 3.3, Coming soon to a dirt pile near you), revo axle carriers(and everything else that goes with them), FLM front bulkheads and chassis

  33. #353
    RC Racer
    Join Date
    Jan 2006
    Location
    Canada, Quebec
    Posts
    215
    heres mine..

    O.S. .18 cv-rx, duratrax header/coupler, team associated RPM tuned pipe, some alloy skid plates, HB shocks, dubro fuel filter

    http://pages.videotron.com/dark/rc/100_1968.jpg
    http://pages.videotron.com/dark/rc/100_1970.jpg
    http://pages.videotron.com/dark/rc/100_1971.jpg
    http://pages.videotron.com/dark/rc/100_1973.jpg
    http://pages.videotron.com/dark/rc/100_1974.jpg
    http://pages.videotron.com/dark/rc/100_1977.jpg
    http://pages.videotron.com/dark/rc/100_1979.jpg
    http://pages.videotron.com/dark/rc/100_2004.jpg
    http://pages.videotron.com/dark/rc/100_2011.jpg
    http://pages.videotron.com/dark/rc/100_2014.jpg



    Please keep all images to a width of 600 pixels or less. To do this, you must edit the image using an image editor before you upload the picture to your host.

    I have changed the images to links so that people don't have to scroll to read the thread.

    Mis'
    Last edited by Misbehavin'; 04-17-2006 at 02:43 PM.

  34. #354
    RC Enthusiast
    Join Date
    Mar 2006
    Posts
    24

    It took a beating


  35. #355
    RC Racer
    Join Date
    Feb 2006
    Location
    michigan
    Posts
    221
    2.5R jato/2.5 t-max/3.3 revo/3.3 jato/stampede xl-5
    drivehard or go home

  36. #356
    RC Competitor
    Join Date
    Jan 2005
    Posts
    56
    my new body and tires.
    they did a great job on the paint..




  37. #357
    RC Qualifier
    Join Date
    Oct 2005
    Location
    MN
    Posts
    260
    Here's my 3.3 T-maxx.



    T-Maxx 3.3 - THS Racing pipe, MIP center CVD's, 2500mah battery pack, and an RC Solutions Roll cage. Wanna Race?

  38. #358
    RC Champion
    Join Date
    Nov 2005
    Location
    St. Louis
    Posts
    1,040


    "Speed, I am speed."

  39. #359
    RC Enthusiast
    Join Date
    Aug 2005
    Location
    ms
    Posts
    20
    THESE ARE MR. SANDERS PICS FROM THE ABOVE POST



    SILVARADO BODY / JR STERING SERVO / TIRE SETS INCLUDE: DIRT PAWS, MASHERS, & WHATEVER THE STREET TIRES ARE CALLED /

  40. #360
    RC poster
    Join Date
    Apr 2006
    Posts
    5




Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •