Page 12 of 12 FirstFirst ... 2101112
Results 441 to 478 of 478
  1. #441
    RC Qualifier
    Join Date
    Nov 2011
    Location
    Southern Indiana
    Posts
    244
    I had a post on here before of my old emaxx. after 3 months of a complete teardown and rebuild it is finally back together and badder than ever.

    3906 emaxx chassis (the purple parts have been powder coated)
    wide track arms
    hardened steel driveshafts
    twin 820 KD motor setup
    rebuilt metal geared 3906 tranny locked in 2nd gear.
    IMEX Swamp Dawg Tires
    Summit evx-2 with LVD.
    Locked rear diff/LS front diff (for easier turning)
    all new ceramic bearings throughout entire truck.
    Home made Twin steering servo setup.

    Upgrades to come:
    New shocks.
    Wanting to purchase a TMAXX roller and convert it over to emaxx spec. leave the automatic 2 speed tranny in. have lots of ideas for it.









  2. #442
    RC Racer
    Join Date
    Oct 2011
    Posts
    149
    My E maxx's 1st run




    Last edited by warthogfan2; 02-27-2013 at 02:39 AM.

  3. #443
    RC poster
    Join Date
    Jan 2013
    Location
    Guam
    Posts
    15
    This is my E-Maxx 3906 with a 73' Bronco Body, not much done to it, just wanted to show.

  4. #444
    RC poster
    Join Date
    Jan 2013
    Location
    Guam
    Posts
    15
    My all original E-Maxx 3906, no mods.

  5. #445
    RC Racer
    Join Date
    Dec 2012
    Location
    western Australia
    Posts
    217
    this is the misses 3906 e-maxx. i decided to upgrade the hubs and axles on it to the old ones I had on my t-maxx 3.3 (just waiting on new center shafts and front axels and hubs). also put the shocks from my 3.3 onto the emaxx. fitted a hpi grave robber body (still in the process of being stickered and finished off), rpm rear arms, rpm shock towers and rpm body post mounts. has a hitec steering servo on it and alloy servo horn, she likes the look of the old wheels n tyres so they are staying. am just waiting on rpm front arms, new motors (I havent decided on whether to run two titan 550 or two dewalt motors), evx-2 and new transmitter and reciever for it as the old one is pretty dated. is a work in progress but thought I would post it. cheers



  6. #446
    RC Competitor
    Join Date
    Mar 2013
    Location
    Clitherall MN 56524
    Posts
    77
    Well got the Bronco body done! This thing is a blast! It's very hard to get it stuck haha I bought a pair of Lipo batteries (Venom 5000 7.4's) as the 8.4 NIMH's it comes with don't last 15 minutes..

    3903 Emaxx
    2.4 2 channel radio
    21T Titans w/ 20t pinions
    Integy motor heat sinks w/ fans- homemade harness
    tuned stock shocks
    RPM F+R bumpers
    RPM 3.2 revolver stableMAXX wheels
    Proline Masher tires
    Proline 73 Bronco w/ extended rear body mount
    Venom 7.4 5000 Lipo's (still waiting for them)





    That is a 1/12th Tamiya Lunchbox haha




  7. #447
    RC Competitor
    Join Date
    May 2013
    Location
    Kansas
    Posts
    88
    My son's 3906.


  8. #448
    RC Qualifier
    Join Date
    Mar 2006
    Location
    S.Wales,uk
    Posts
    731


    Not a lot left of my 3905.
    " TRX3922a doesnt snap " IT SHATTERS !!!

  9. #449
    RC Qualifier
    Join Date
    Feb 2013
    Posts
    566
    My 31 year old nitro son came by and borrowed my 3906 to take for a trip to the country lol. He sent me some pics of him crawling with it lol. I have some work to do on it this week, it has two sheared bumper screws that new FLM X braces will take care of. As well as larger pinion gears, 18T to 20T and rebuild the trans, new bearings and idlers. Wheels and tires are getting replaced very soon. He had a blast with it.






    Last edited by Oldrcguy; 05-12-2013 at 07:04 PM.

  10. #450
    RC poster
    Join Date
    Jan 2013
    Location
    Guam
    Posts
    15
    Here's my E-Maxx 3906 with an 07 Silverado body.
    Last edited by macc89; 05-18-2013 at 06:09 AM.

  11. #451
    RC poster
    Join Date
    Jan 2013
    Location
    Guam
    Posts
    15
    Here's my E-Maxx 3906 original body Plasti-Dipped.

  12. #452
    RC Racer
    Join Date
    Jun 2013
    Posts
    124

    My E Maxx titan 775

    This is my e maxx 775 titan

    water is fun

  13. #453
    RC Qualifier
    Join Date
    May 2013
    Location
    Ohio
    Posts
    473
    Here's my E-Maxx or so I called it the Mud-Maxx .

    Did you say Traxxas?

    Yes with or without lipos.

  14. #454
    RC Qualifier
    Join Date
    Nov 2007
    Posts
    424
    Another successful outing with my E-Maxx. After four dormant months following an ESC failure, I replaced it with a new Tekin RX-8 system with a 1700 kV truggy motor. Works beautifully as a thrashed body, mud splatters, and a destroyed roll bar-mounted light bar can attest.


    Another Successful Bash by Lunitic, on Flickr

  15. #455
    RC Racer
    Join Date
    Aug 2013
    Location
    Surrey BC and Aurora Oregon
    Posts
    115

    My Basically Stock 3906 Drity to Clean and test fitting a 40,000 mAh LiPo.

    Well the Web Link to the Gallery is here, http://captfiero.com/rccarstuff/EmaxxDirty

    However here are the direct pics. In a smaller version.






















  16. #456
    RC Racer
    Join Date
    Aug 2013
    Location
    Surrey BC and Aurora Oregon
    Posts
    115



















  17. #457
    RC Racer
    Join Date
    Aug 2013
    Location
    Surrey BC and Aurora Oregon
    Posts
    115
    I am splitting the pack up from 4 wide into 2 packs of 2 cells. So it will be 2x 20,000 mAh packs. One on each side roughly where the stock batteries would go. Each Tube is a 10,000 mAh LiPo single cell. I think running a pair of 2S LiPo's should at the least give me some good run time over my current 2x 3000mAh Nimhs. If I don't get enough Punch I'll add 2 more cells and run it as a pair of 3S LiPos bringing me up to 60,000mAh in the truck.

















  18. #458
    RC poster
    Join Date
    Sep 2013
    Posts
    6
    The wife decided to lower the Maxx today

  19. #459
    RC Enthusiast
    Join Date
    Feb 2011
    Location
    north west missouri
    Posts
    49
    Some of my first upgrades of course lots more to come!
    Rear RPM bumper

    Front RPM bumper

    RPM skid plate set

    17 mm hub adapters

    Traxxas center drive shaft upgrade

    more coming later this month.
    ////SPIDERSVENOM\\\\ SUMMIT / EMAXX / SLASH /

  20. #460
    RC poster
    Join Date
    Jan 2014
    Posts
    2
    Here is my E-Maxx (3903)

    Pro-Line F-650 Body
    Pro-Line Trencher X tries on Desperado Black Rims (1/2" Offset)













    Last edited by dirtysouthrcs; 01-08-2014 at 12:47 PM.

  21. #461
    RC poster
    Join Date
    Mar 2012
    Posts
    6
    Last edited by Jimmy_russia; 01-15-2014 at 01:32 PM.

  22. #462

  23. #463
    Traxxas Marshal cooleocool's Avatar
    Join Date
    Mar 2003
    Location
    Wherever the road takes me.
    Posts
    36,879
    It has been a good winter for snow bashing!


    E-Maxx in the Snow Winter 2013/2014 by CooleoCool's Photos, on Flickr
    "Happiness depends upon ourselves." -Aristotle

  24. #464
    RC Champion
    Join Date
    Jan 2007
    Location
    Hibernating in my basement, trying to see just how many RC projects i can work on at one time!!
    Posts
    1,547
    Quote Originally Posted by cooleocool View Post
    It has been a good winter for snow bashing!
    You are right about that, my friend!!







    Sent from my Kindle Fire using Tapatalk 2
    Slash BL-Pede-E 4Tec-FLM EMAXX-Wraith-AX-10-SCX-10

  25. #465
    RC poster
    Join Date
    Feb 2014
    Posts
    4
    My pretty much stock e-maxx. Was a surprise birthday gift this past week. The only upgrades are RPM bulkhead braces and RPM skid plates.




  26. #466
    RC Enthusiast
    Join Date
    Jan 2014
    Location
    Auburn, Ca
    Posts
    44




    Last edited by budlite28; 03-04-2014 at 02:47 PM.

  27. #467
    RC Racer
    Join Date
    Feb 2012
    Location
    Melbourne, FL
    Posts
    140
    3903 E-Maxx Brushed Edition w/Wheelie Bar
    Kershaw Designs Dual 700 HO Motor Conversion Kit (25t pinions)
    SPC 6900 mAh 70C 2s Li-Po x2










  28. #468
    RC Racer
    Join Date
    Feb 2012
    Location
    Melbourne, FL
    Posts
    140
    A few more pics with the new modifications. Kershaw Designs EVX-2 esc cooling fan, and Hot Racing aluminum bell-crank ball bearing steering kit:







    Last edited by CC_Blaster; 03-29-2014 at 01:51 PM.

  29. #469
    RC Competitor
    Join Date
    Jan 2007
    Posts
    80
    3906, owned for 14yrs ish, modified. Recently a new Novak Diablo BL system and shell. Her she is






  30. #470
    RC poster
    Join Date
    Mar 2014
    Posts
    13
    My e-maxx. Powered By Castle 1717 & XL2. 8s capable


  31. #471
    RC poster
    Join Date
    May 2014
    Location
    Ukraine
    Posts
    1
    E-Maxx and Summit 1:16
    Pro-Line Ford F-150 Raptor on both.
















  32. #472
    RC Enthusiast
    Join Date
    Jan 2014
    Location
    Auburn, Ca
    Posts
    44

  33. #473
    RC poster
    Join Date
    Dec 2013
    Posts
    1

  34. #474
    RC Enthusiast
    Join Date
    Jan 2014
    Location
    Auburn, Ca
    Posts
    44
    [IMG][/IMG]





  35. #475
    RC Racer
    Join Date
    Jun 2014
    Location
    San Gabriel, CA
    Posts
    181
    Recently picked up a LaTrax Teton for my son and a Mini E-Revo for myself.
    I've had an E-Maxx 3906 sitting in it's bin in my garage for about 8 years.
    Just took it out and have to go over it before running it again... can't wait!

















    http://traxxas.com/forums/showthread...r-Introduction

  36. #476
    RC Competitor
    Join Date
    Apr 2013
    Location
    Wisconsin
    Posts
    77

  37. #477
    RC Competitor
    Join Date
    May 2011
    Location
    Zion, IL
    Posts
    82
    Newly found yard sale vintage 3906.

    Slash VXL
    Grave Digger 'Pede
    30th Digger 'Pede

  38. #478
    RC Racer
    Join Date
    Jun 2014
    Location
    San Gabriel, CA
    Posts
    181
    Wow... Mine looked just like that 10+ years ago!

    Just finished painting my new body today.

    My P40b WarHawk inspired...

    WarBAJR






    http://traxxas.com/forums/showthread...012856-WarBAJR
    Last edited by Squeegie; Today at 07:04 PM.
    Mini E-Revo VXL / E-Maxx 3906 / LaTrax Teton

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •