^Is what is posted in the FAQ section of the traxxas website, However when I turn my 2 speed trans 7 1/4 turns I can push the car across the floor and the second gear ingages. So as fas as I can tell on my car the information given by traxxas is false. I'm not sure anyone here have any ideas of problems with my car or is it the web site?Make sure that the engine is reasonably tuned and broken-in first. During the break-in, the engine is being run so rich that the engine may not turn fast enough to reach the shift point. If your engine is broken-in, try tightening the adjustment screw until it stops (make sure not to screw it too tight or you can damage the spring underneath the set screw). Back the set screw out between 7 1/4 and 7 1/2 turns and this should set your shift point.