Page 4 of 4 FirstFirst ... 234
Results 121 to 146 of 146

Thread: N4-Tec Gallery

  1. #121

  2. #122
    Just got the new body on it.... So ready for this weekend...

    www.facebook.com/scottwiland

  3. #123
    RC Racer
    Join Date
    Jan 2010
    Location
    California
    Posts
    205

    Nitro 4tec ..basic spray and play



    "My Ideas always work sometimes"

  4. #124
    RC Champion
    Join Date
    Mar 2010
    Location
    Hackettstown,NJ
    Posts
    1,442
    Here's mine.. the body is stock.. I like the look.... Under the cover its been converted to all 3.3 specs from the chassis to the belts and pulleys.. I run a 2.5R motor because its fast enough for where I run and my friend has the 3.3 and its really not that much difference.. His is quicker off the line, but we run at near mid to top end most of the time and they are the same there.. I have a couple of mods, primarily moving the battery to the front bumper, wider belts, Spektrum radio and 2070 servos for throttle and brake. I also run Jaco Foams all around as the stock tires don't last long enough and the foams grip better.. The picture is a little old but you get the idea.. I still have the old FM radio in there.

  5. #125
    RC Enthusiast
    Join Date
    Aug 2009
    Posts
    23
    I picked up a 4-tec should be a nice parts car for a project.

    "project spaghetti bowl"

    http://i262.photobucket.com/albums/i...ishedparts.jpg
    Last edited by carraig042; 04-11-2010 at 10:29 AM.

  6. #126

  7. #127
    RC Champion
    Join Date
    May 2009
    Location
    Cleveland, OHIO
    Posts
    1,228
    here is mine, its all brand new, never ran yet.
    hpi supra body
    2.4 ghz high output radio w/5ch rx
    THS jato pipe and header
    venom 1600mah hump pack
    revo power switch with charge jack
    deanodized and polished chassis
    fuel filter (not installed in pics)
    pull start

    http://i388.photobucket.com/albums/o...0410001905.jpg
    http://i388.photobucket.com/albums/o...0410001902.jpg
    http://i388.photobucket.com/albums/o...0410001904.jpg
    http://i388.photobucket.com/albums/o...0410001906.jpg
    http://i388.photobucket.com/albums/o...0410001907.jpg

    also i attempted to make custom carbon fiber upper plates and tower. failed but still working on it (real red carbon fiber)
    http://i388.photobucket.com/albums/o...0410001559.jpg

    Lets keep images to 640 x 480 or smaller please!
    -Carraig042
    Last edited by carraig042; 04-11-2010 at 10:29 AM.
    As of 4-1-10 im back in the rc scene

  8. #128
    RC poster
    Join Date
    Apr 2010
    Posts
    9
    Last edited by carraig042; 05-04-2010 at 11:25 AM.

  9. #129
    RC Enthusiast
    Join Date
    Aug 2009
    Posts
    23
    photobucket.com (victory-rc)

  10. #130
    RC Enthusiast
    Join Date
    Aug 2009
    Posts
    23


    photobucket.com (victory-rc)

  11. #131
    RC Racer
    Join Date
    Dec 2009
    Location
    Morrison, Co
    Posts
    146
    Had to put up some shots of my 4-Tec while its clean. Unfortunetely thats the best body I have right now. It was painted back in 02-03 when I was driving my original 2.5 4tec. Its now my basher body and only usable body also.







    N4tec x3
    Slash 4x4
    Rustler-in a box

  12. #132
    RC Competitor
    Join Date
    Apr 2009
    Location
    NC
    Posts
    86

    New 3.3 Audi TT it was supposed to be cobalt blue looks purple to me


  13. #133
    RC Qualifier
    Join Date
    Mar 2008
    Posts
    705








    Just a few pics to show some of the carbon fiber pieces I've been making myself. Chassis, Tie Bar, Rear Shock Tower, Upper Chasses, Bumper Foam Plate. I have a few extras of everything so keep your eyes on ebay if ur interested. Thanks for looking!
    If you can't beat it....destroy it!

  14. #134
    RC Enthusiast
    Join Date
    Nov 2009
    Location
    Canada
    Posts
    24
    Just shot this video last week of my 4tec's first run this summer.
    http://www.youtube.com/watch?v=8-vqp7XyH8I

  15. #135
    RC Qualifier
    Join Date
    Mar 2008
    Posts
    705
    This is a Rally conversion....not much of a conversion but there are some small changes and fabs you can't see with the shell on. Ride heigth is raised, rally tires, cut-outs in chassis front and rear diffs covered with lexan to prevent dirt from tearing but belts and diffs.

    If you can't beat it....destroy it!

  16. #136
    RC poster
    Join Date
    Feb 2011
    Posts
    1




    Nitro 4-tec. Used to be .15 pro. all plastic nitro 2.5 parts except rear diff, Made rwd, 31 mm hpi vintage tire in rear on 9 spoke, 26 mm vintage front tire on 9 spoke. 2.5 with new aftermarket cooling head, stock clutch trx 40mm milled flywheel and trinity tuned pipe. stampede front st ub axles with homeade aluminum spacers. Ceramic bearings, adjusted castor, aluminum shocks, futaba 4cell battery pack, sway bars, pullstart, pro ball diff, gonna get the 190mm porshe body



    more pics will be posted soon,
    Last edited by Stampedebashin; 02-27-2011 at 03:50 AM.

  17. #137
    RC Racer
    Join Date
    Oct 2009
    Location
    ur house,NY
    Posts
    185



    My project. Was a 1.5, Installed new chassis, all new bearing, new 3.3 plastic parts. Everything. The pic doesn't do the body justice. It looks kind of blue in the front. Really candy purple that fades into matalic black. yeah it would have been cheaper to just buy new but I have fun rebuilding the old. This is my 3rd 4-tec, also have done 2 tmaxx's and a rc10gt FT.

  18. #138
    RC Racer
    Join Date
    Sep 2011
    Posts
    128

    Accessory Overkill Nitro 4-Tec Pro


  19. #139
    RC poster
    Join Date
    Feb 2012
    Posts
    2
    http://www.youtube.com/watch?v=GjFus...1&feature=plcp first time running in a while. need to find some nitro tracks around my area. Sarasota Fl.

  20. #140
    RC Racer
    Join Date
    Jun 2011
    Location
    Spring, TX
    Posts
    117
    There seem to be some extra wires here...



    Slash 4x4
    Slayer Pro
    Nitro 4-Tec 3.3

  21. #141
    RC Racer
    Join Date
    Sep 2011
    Posts
    128

    Nitro 4-Tec Pro

    A few pictures of my nitro 4-Tec Pro with power-line options.









  22. #142
    RC poster
    Join Date
    Jun 2012
    Posts
    1
    This is my frank4-tec
    Many here in Brazil do not approve of the brakes and the instability of the 4-tec
    so I decided to brake problems and instability adapting parts of a hpi rs4 evo 3
    trays suspension arms are the rs4
    the tower diateira the rs4 was also adapted
    The brake system was perfect
    changes because the car was very controllable
    so I installed a picco .26 engine
    Sorry dirt car
    I'll post new pictures with the car clean and with new parts that are coming from ebay









    Last edited by colela; 07-18-2012 at 11:53 AM.

  23. #143
    RC poster
    Join Date
    Mar 2008
    Posts
    8

    My N4Tec

    Here's my Nitro 4-Tec. Nearly stock, First Generation Pro .15 model with the factory original engine still in tact (Although it has been rebuilt one time).
    The only aftermarket parts (aside from tires, wheels and body) are the servos. The front shocks are Traxxas Nitro 4-Tec 3.3 replacements, The radio is a new TQi 2.5GHz 4 channel radio, plus I added the receiver box from the 3.3 model, Just to keep up with looks. The front drive belt is MIA (waiting on money to order a few new ones) So i've been feathering the throttle on RWD only.
    The body is a custom-painted ProtoForm Gen2TCC body, with my own paint scheme (which is an original, and I do have a race sponsor, although I can't get decals printed yet)
    I have 2 more of the same body ready, but need paint. That likely won't happen until spring. I also have a rain tire (last picture) for when the parking lots are a bit wet.










    And at the risk of being given a warning, here's the original design for the paint job (this time with my sponsor showing)

    Last edited by Morgfarm1; 01-12-2013 at 02:24 AM.

  24. #144
    RC poster
    Join Date
    Mar 2014
    Posts
    4
    Video in Sweden, on my 4-tec: https://www.youtube.com/watch?v=bNj0ualSBK4

  25. #145
    RC Competitor
    Join Date
    May 2010
    Posts
    95
    Here is a video of the remote start and kill switch on my 4Tec 3.3, that is now basically a Nitro Telluride 3.3, as you will be able to notice.
    https://www.youtube.com/watch?v=uMlW...ature=youtu.be

  26. #146
    RC poster
    Join Date
    Oct 2014
    Posts
    2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •