Page 8 of 10 FirstFirst ... 678910 LastLast
Results 281 to 320 of 398
  1. #281
    RC Racer
    Join Date
    Jun 2008
    Posts
    105
    were did you get that exhaust for the rusty?and is it any good?

  2. #282
    RC poster
    Join Date
    Apr 2008
    Posts
    19

    new tyres


  3. #283
    RC Racer
    Join Date
    May 2008
    Location
    Hurst Tx.
    Posts
    135
    what tires are those?
    -=Allan=-
    Hurst Tx.

  4. #284
    RC poster
    Join Date
    Apr 2008
    Posts
    19
    thunder tiger and they stick to the ground well

  5. #285
    RC Competitor
    Join Date
    Jan 2008
    Posts
    54
    Couple of pics I took after driving it around in the mud. Mostly stock I replace parts with Aluminum when I break stuff. Bashing body!



  6. #286
    RC Qualifier
    Join Date
    Apr 2008
    Location
    West Palm Beach, Florida
    Posts
    421
    So dirty! That's great.

  7. #287
    RC Turnbuckle Jr.
    Join Date
    Oct 2006
    Location
    georgia
    Posts
    3,299
    my rustler 3.3 and big brother axial .28 revo




    65mph n rusty 13 more mph to go :)

  8. #288
    RC Enthusiast
    Join Date
    Aug 2007
    Location
    New Jersey
    Posts
    24

    My Rusty

    Thank you Traxxas for allowing me to make one beautiful Rusty!
    Here it is in my shop:





    Dive till stuff falls off!

  9. #289
    RC Racer
    Join Date
    Jan 2008
    Location
    Here!
    Posts
    109
    Heres my rusty... I there is new parts on it now so it looks different from the pictures. Now I've got a failsafe and some big bores.

    CLICK HERE
    http://photobucket.com/Tomsnitrorustler

  10. #290
    RC Competitor
    Join Date
    Jan 2008
    Posts
    54
    I didn't have the money to buy a new body and tires/wheels today so I just bought can of white spray paint, a revo wing and mount and wheels/tires, At this time they were still being died. :P

    To my surprise it was extremely easy to get the revo wing on.

    Yesterdays Rusty


    Todays Rusty




  11. #291
    RC Qualifier
    Join Date
    Nov 2007
    Location
    so. cal
    Posts
    306
    this is my rustler. its not put back together all the way (wheely bar wheels, throtle, break linkage, NE roll bar) these arent the best pics so ill get some betterones soon. expesially some of my custom monster energy body.







    IMG]http://i229.photobucket.com/albums/ee70/thenexttomdelonge/car8.jpg[/IMG]



    2-strokes: it aint fast unless u mix the gas.

  12. #292
    RC Qualifier
    Join Date
    Nov 2007
    Location
    so. cal
    Posts
    306
    this is my rusty. i still have to put the roll bar on and find a way to put on a wing. carbon fiber front shock tower coming soon!













    thease arent the best pics but ive got betterones coming.
    2-strokes: it aint fast unless u mix the gas.

  13. #293
    RC Racer
    Join Date
    Apr 2008
    Location
    Bismarck ND
    Posts
    219
    i love that monster logo on your body but that ne roll bar was the best thing i bought save me countless times

  14. #294
    RC Champion
    Join Date
    Jul 2006
    Location
    Lakewood, WA
    Posts
    1,345
    Just installed a THS racing pipe designed for .21-.28 racing engines. I had to hack up the body pretty good in order for the shell to fit right... But who cares about looks right? lol.





    O.S. .21 VZ-R Turbo with THS 1/8th scale racing pipe

  15. #295
    RC Champion
    Join Date
    Feb 2008
    Location
    Mashpee Massachussets
    Posts
    1,273
    This is my son-in-law's Nitro Rusty, sporting a new body featuring his very first paint job! Hot rod two tone style silver over true blue pearl backed in silver w silver pin stripe.
    Upgrades:
    dynamite race guard micro fail safe
    traxxas aluminum rear shocks
    rpm rear shock tower, (hear by this Friday)
    proline dirt works on traxxas stars on the rear
    jato wheelie bar










    Last edited by iltsonitm; 07-08-2008 at 07:23 AM.
    (Got Fuel?) REVO 3.3, Jato 3.3, Rustys Daddy!

  16. #296
    RC Qualifier
    Join Date
    Apr 2008
    Location
    West Palm Beach, Florida
    Posts
    421
    Looks very nice. Better put a front bumper on that thing or that front brace is going to be broken in no time.
    Cen Matrix TR - Swks .21 V2
    Losi 8B - Swks .21 V2

  17. #297
    RC Qualifier
    Join Date
    Jul 2008
    Location
    Ohio
    Posts
    358
    Heres my rusty.. Its only two days old so its mostly stock. Bought some accessories and all new road tires and wheels..











    Credit for all this goes to my local and best hobby shop around!
    Dan's Crafts and Things!

  18. #298
    RC Qualifier
    Join Date
    Apr 2008
    Location
    West Palm Beach, Florida
    Posts
    421
    Here are some pics of my rusty. I'm in the process of breaking in the engine.t. This rusty came from a nitro stampede, I still use the old body pede for bashing.






    Cen Matrix TR - Swks .21 V2
    Losi 8B - Swks .21 V2

  19. #299
    RC Qualifier
    Join Date
    Jul 2008
    Location
    Ohio
    Posts
    358
    what size engine is that. I noticed its an OFNA Picco. Is it the .21 or .26?

  20. #300
    RC Qualifier
    Join Date
    Apr 2008
    Location
    West Palm Beach, Florida
    Posts
    421
    Quote Originally Posted by M3Roc
    what size engine is that. I noticed its an OFNA Picco. Is it the .21 or .26?
    It's a .26
    Cen Matrix TR - Swks .21 V2
    Losi 8B - Swks .21 V2

  21. #301
    RC Turnbuckle Jr.
    Join Date
    Dec 2007
    Location
    Oregon
    Posts
    5,177
    Did it fit fine with the conversion kit I am probably going to get a .26 maxx.
    ⓘ ⓐⓝⓣ ⓣⓗⓘⓝⓚ ⓞⓕ ⓐⓝⓨ ⓣⓗⓘⓝⓖ ⓖⓞⓞⓓ ⓣⓞ ⓦⓡⓘⓖⓗⓣ ⓗⓔⓡⓔ

  22. #302
    RC Qualifier
    Join Date
    Apr 2008
    Location
    West Palm Beach, Florida
    Posts
    421
    Quote Originally Posted by Cynix
    Did it fit fine with the conversion kit I am probably going to get a .26 maxx.
    The kit does it's job, but I had to grind down some places, the fuel tank box, and double up on the motor mounts to make the 24-60 mesh properly and position the carb without having to grind my transmission case.
    Cen Matrix TR - Swks .21 V2
    Losi 8B - Swks .21 V2

  23. #303
    RC Turnbuckle Jr.
    Join Date
    Dec 2007
    Location
    Oregon
    Posts
    5,177
    Ok thanks.
    ⓘ ⓐⓝⓣ ⓣⓗⓘⓝⓚ ⓞⓕ ⓐⓝⓨ ⓣⓗⓘⓝⓖ ⓖⓞⓞⓓ ⓣⓞ ⓦⓡⓘⓖⓗⓣ ⓗⓔⓡⓔ

  24. #304
    RC Enthusiast
    Join Date
    Aug 2007
    Location
    New Jersey
    Posts
    24

    Wink Nitro Rusty Update

    Here it is!



    Dive till stuff falls off!

  25. #305
    RC Champion
    Join Date
    Jul 2006
    Location
    Lakewood, WA
    Posts
    1,345


    Rustler vs 4-tec part 2???? We'll see!










    Last edited by grandtheft; 07-24-2008 at 07:27 PM.

  26. #306
    RC Qualifier
    Join Date
    Jul 2008
    Location
    Ohio
    Posts
    358







  27. #307
    RC Qualifier
    Join Date
    Apr 2008
    Location
    Middletown Ohio
    Posts
    566
    well here are some pics of my rusty with some new gear on her.

    [IMG][/IMG]

    [IMG][/IMG]

    [IMG][/IMG]

    jato armed rusty 3.3
    :)

  28. #308
    worstluck
    Guest
    the rusty lookin ready to race. no engine in it at the moment.




  29. #309
    RC poster
    Join Date
    Aug 2008
    Posts
    1
    Here is my Rustler with both bodies.

  30. #310
    RC Qualifier
    Join Date
    Apr 2008
    Location
    West Palm Beach, Florida
    Posts
    421
    Quote Originally Posted by MikeMc
    Here is my Rustler with both bodies.
    Can't see anything..... I don't think you posted the pictures right.
    Cen Matrix TR - Swks .21 V2
    Losi 8B - Swks .21 V2

  31. #311
    RC Racer
    Join Date
    Jun 2008
    Posts
    226
    my truck:





    i need a 3.3 for my cf rustler

  32. #312
    RC Racer
    Join Date
    Jun 2008
    Posts
    226
    i need a 3.3 for my cf rustler

  33. #313
    RC Enthusiast
    Join Date
    Aug 2008
    Posts
    27

    Few Pics of my Upgraded Rusty

    Here's a few pics of my Rusty and my first attempt at painting a body. The paint job didnt turn out too badly for a newb











  34. #314
    RC Champion
    Join Date
    Jul 2006
    Location
    Lakewood, WA
    Posts
    1,345
    Here are a few updated pics of my .21VZ-R Rustler. I just got a JConcepts Illuzion body painted by Kustom RC Graphics. Thanks Larry, she is beautiful!!









    Not too much done lately under the hood. Recently installed the CVD kit and the M2C racing clutch shoes. Also used shrink tubing on the wires to clean up the look. Using the new Jaco 2.8 foams



  35. #315
    RC Racer
    Join Date
    Jan 2008
    Location
    Here!
    Posts
    109
    Here are few of mine after dying my new rims! Hop ups include:
    Ofna fail safe
    Dyed traxxas rims
    Proline "the edge" front tires
    Proline "Gladiator II" rears
    Fuel filter
    Traxxas big bore rear shocks
    RPM rear shock towers


    http://photobucket.com/Tomsnitrorustler

  36. #316
    RC Enthusiast
    Join Date
    Oct 2008
    Location
    i like in the country of upstate ny
    Posts
    27

    hello all new to the hobbie

    ]hello all new to traxxas and new to the nitro motors i just went and won a bid on ebay of a traxxas rustler with a 2.5r and a tune pipe on it like i said i am new to the hobby and i am intrested in it i only paid around 220 for the whole set up the truck extra parts a remote a batt n charger and even some gas and after run oil and like i said i an new so i want to learn more before i run it i mess it up here are a few pics and the truck is red so i wont post a pic of that dont want to have to sing iam a lil tea pot over and over lol well i cant figure it out how to put pics in it on my puter so back to the drawing board well any help on teaching a newbie how to run a nitro rustler would be great the seller told me to join the web page you guys can teach me a lot if not anything i need to know well thanks again for your time

  37. #317
    RC Enthusiast
    Join Date
    Oct 2008
    Location
    i like in the country of upstate ny
    Posts
    27
    ok i got it i think so i am going to try this again here are a few pics of my new rustler i won off ebay its of course you guys know a nitro rustler 2.5r with a tune pipe any other info you guys have on it please let me know this is my truck http://i387.photobucket.com/albums/o...mny73/toy4.jpg and this is the other pic if i did this wrong i am sorry and like i said help is allways greatfull http://i387.photobucket.com/albums/o...mny73/toy3.jpg

  38. #318
    RC Competitor
    Join Date
    Oct 2008
    Location
    Columbus, OH
    Posts
    81

    3.3 nitro rusty

    [IMG]5.rcuniverse.com/e1/gallery/photos/413126/thumb-154994.jpg[/IMG]
    Is it bad that everything I own smells like nitro?

  39. #319
    RC Qualifier
    Join Date
    Sep 2008
    Location
    In a building...
    Posts
    258
    Quote Originally Posted by ldean
    [IMG]5.rcuniverse.com/e1/gallery/photos/413126/thumb-154994.jpg[/IMG]
    After a bit of digging I found the photo this was trying to link too:


    However from that thumbnail it would appear to be the same image that was posted farther up this same thread. It's too small to tell really.
    I sink, therefore I swim.

  40. #320
    RC Qualifier
    Join Date
    Aug 2008
    Posts
    356
    upgrades:
    front talons
    rear talons
    aluminum hb rear shocks
    sc resonator (bored 1/4")
    dubro fuel filter
    ofna micro fail-safe
    RPM rear shock tower
    72t spur
    futaba throttle/brake servo

    [IMG][/IMG]

    [IMG][/IMG]

    [IMG][/IMG]

    [IMG][/IMG]
    Losi 1/18 LM, Jato3.3,Revo 2.5r, Micro-t, Losi 8.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •