Page 10 of 10 FirstFirst ... 8910
Results 361 to 398 of 398
  1. #361
    RC Qualifier
    Join Date
    Jan 2011
    Location
    Atlanta, Ga.
    Posts
    384
    Pics of my Nitro Rustler. It has aluminium castors as well as front and rear shock towers. Also, the 2.4ghz rx is housed in a waterproof box and both servos have been changed to waterproof, steering is a 2055 and throttle/brake is a 2075. I upgraded the muffler to a tuned pipe as well as adding a RPM front bumper.



    Nitro Rustler, Rustler HW Brushless Motor, ESC

  2. #362
    RC Champion
    Join Date
    Mar 2011
    Posts
    1,480






    I guess I should put the pics where they belong as opposed to dragging out a long build thread. lol I still need some up todate pics of my off road rusty so i'll add those later. Tell me what you think. I'm open to new ideas. I would love a big block with a nice pipe and header but it will a while til I have enough cash. The 3.3 thats in it will get a rebuild and go in the off roader.
    Shaggy...

  3. #363
    RC Qualifier
    Join Date
    Feb 2010
    Location
    Brewster ma.
    Posts
    701

    May have posted this , not sure ?
    Sent from my workbench
    Keep the shiny side up!

  4. #364
    RC Qualifier
    Join Date
    May 2011
    Location
    florida
    Posts
    306
    [IMG][/IMG]
    [IMG][/IMG]

    my baby. the 98' rebuilt.
    Im young. And im Learning.

  5. #365
    RC Enthusiast
    Join Date
    Nov 2011
    Location
    Sothfield, MA
    Posts
    44
    Here is my nitro rustler the only thing not alloy (yet) is the Jato 2 speed tranny and shock tower, the rear hubs and the front and rear A-arms (they are RPM) I all so have the 3.3 installed.

  6. #366
    RC Enthusiast
    Join Date
    Nov 2011
    Location
    Sothfield, MA
    Posts
    44

  7. #367
    RC Champion
    Join Date
    Mar 2011
    Location
    Delta, Pa.
    Posts
    1,784
    The final identity of The Slustler.Next to a stock sized rusty

  8. #368
    RC Enthusiast
    Join Date
    Dec 2011
    Posts
    28

  9. #369
    RC Racer
    Join Date
    Jul 2011
    Location
    N.E. Wyoming
    Posts
    224


    in newest form
    aluminum for ever!!!!!!!!!!!!!!!!!!

  10. #370
    RC Racer
    Join Date
    Feb 2012
    Posts
    137
    here is my 3.3 speed rustler


  11. #371
    RC Qualifier
    Join Date
    Mar 2012
    Location
    Vassar, MI
    Posts
    349
    My 100 dollar nitro rusty off craigslist!


    RustlerVXL&Nitro
    Jato 3.3
    Spartan
    Slash 4x4

  12. #372
    RC Racer
    Join Date
    Dec 2011
    Location
    Wilmington, De
    Posts
    150

  13. #373
    RC Champion
    Join Date
    Mar 2011
    Posts
    1,480
    I got board so I took some pics of the rustys today. 3 perfectly working rustys, no engines... Let me know what you think. The small, stock sized roller with the stampede body is up for sale. I have a buyer lined up but if that don't work out, look for it in the market place. PM me offers on it if your interested just incase it doesn't sell.






    Shaggy...

  14. #374
    RC Enthusiast
    Join Date
    Apr 2012
    Location
    Wisconsin
    Posts
    22


    sent from android.

  15. #375
    RC Competitor
    Join Date
    Jun 2012
    Location
    Nor Cal
    Posts
    68
    Hey guys. I'm new to the forum but not to RC. Here is my Rusty.




  16. #376
    RC Racer
    Join Date
    Dec 2011
    Location
    Wilmington, De
    Posts
    150

    A little dirty

  17. #377
    RC Qualifier
    Join Date
    Jan 2012
    Location
    harrodsburg ky
    Posts
    445
    heres my nitro rustler RPM VXL suspension and with anaconda tires on black chrome wheels with a shock mod that lowered it 3/4 of an inch

  18. #378
    RC Racer
    Join Date
    Jul 2011
    Location
    N.E. Wyoming
    Posts
    224



    well with a bad motor i thought i would get it all cleen and ready to go for the next one. dont know what it will be tho
    aluminum for ever!!!!!!!!!!!!!!!!!!

  19. #379
    RC Racer
    Join Date
    Jul 2011
    Location
    N.E. Wyoming
    Posts
    224



    Powerman is right these are the funest in the dirt!!! will get more pix of my aluminum one sometime when its clean.
    aluminum for ever!!!!!!!!!!!!!!!!!!

  20. #380
    RC Qualifier
    Join Date
    Aug 2012
    Location
    Middle, Georgia
    Posts
    968
    Here is mine the day it came in the Mail.

    A week after I got it and out some Badlands on factory Twin Spoke Wheels

  21. #381
    RC Enthusiast
    Join Date
    May 2011
    Posts
    42
    Here is my Rusty, now converted to electric (to be able to race 2 classes instead of one at my local club who only accepts elec.) but soon to be reconverted to nitro for winter


  22. #382
    RC Enthusiast
    Join Date
    May 2011
    Posts
    42
    Here's my rusty back when it was still nitro:


  23. #383
    RC Qualifier
    Join Date
    Dec 2011
    Location
    Woodward, OK
    Posts
    424
    I have had mt old trusty rusty since about 2000 or 2001 when they first came out.


    sent from my not so smart, smart phone
    T-maxx 3.3
    Rusty 2.5r
    Summit VXL
    Nitro 4-tec

  24. #384
    RC Enthusiast
    Join Date
    Dec 2011
    Posts
    28
    [IMG][/IMG]

    Jato Hi-Speed Illuzion Body...
    Just painted..
    2.5
    RPM arms, head, front bump.
    Integy Bell Crank.

  25. #385
    RC Champion
    Join Date
    Mar 2011
    Location
    Delta, Pa.
    Posts
    1,784




  26. #386
    RC poster
    Join Date
    Mar 2013
    Posts
    14

    My Nitro Rustler



    The Run Down:
    • Fixed the broken lower shock mount
    • Replaced upper chassis with Aluminum one
    • Replaced the broken A Arms with Blue RPM A-Arms.
    • Replaced the receiver with a Traxxas Mini receiver
    • Put that receiver in a water proof box
    • Used an Antennae mount from my 20 year old Thunder Tiger Panda 


    Previous Upgrades:
    • Entire steering replaced with Integy parts
    • Front and back shock towers are RPM
    • Lost the plastic top of Engine, replaced with RPM

  27. #387
    RC Champion
    Join Date
    Mar 2011
    Location
    Delta, Pa.
    Posts
    1,784
    Just keeping the pics current.








    Last edited by Powerman; 06-17-2013 at 03:09 PM.

  28. #388
    RC Racer
    Join Date
    Dec 2012
    Posts
    103
    here is my uncle's 1994 nitro rustler that will still work with just some fuel and the impact to start it (pain in the but to start).


    http://tinypic.com/view.php?pic=2vj1wfd&s=5



    I got it for 15.00 what an dum but

  29. #389
    RC poster
    Join Date
    Sep 2013
    Posts
    11



    Sent from my iPhone using Tapatalk - now Free

  30. #390
    RC poster
    Join Date
    Sep 2013
    Posts
    11


    Got the Big bore shocks and front RPM A arms installed tonight doing the rear tomorrow night


    Sent from my iPhone using Tapatalk - now Free

  31. #391
    RC Qualifier
    Join Date
    Aug 2012
    Location
    Middle, Georgia
    Posts
    968
    Right before I cleaned it up and sold it.



    Sent from my SCH-I535 using Tapatalk 2

  32. #392
    RC Qualifier
    Join Date
    Aug 2012
    Location
    Middle, Georgia
    Posts
    968
    Got another one. Put it back together with some parts my buddy had laid running around. Paid $50.




    Sent from my SCH-I535

  33. #393
    RC poster
    Join Date
    Mar 2014
    Posts
    17
    Nitro Rustler conversion 4s












  34. #394
    RC Competitor
    Join Date
    May 2014
    Posts
    97
    My baby



    Two speed jato trans, .21tm, all alloy hop ups. I cannot list them all because I'd be here all day. If its upgradable it is. 80mph topspeed. Could go faster with revo gearing but I love my acceleration.

  35. #395
    RC Enthusiast
    Join Date
    Jul 2013
    Location
    Dallas, Texas
    Posts
    33
    Here is my rusty

  36. #396
    RC Enthusiast
    Join Date
    Jul 2013
    Location
    Dallas, Texas
    Posts
    33
    More pics

  37. #397
    RC Qualifier
    Join Date
    Aug 2012
    Location
    Middle, Georgia
    Posts
    968
    Just keeping the thread alive

  38. #398
    RC Competitor
    Join Date
    May 2014
    Posts
    97
    I'm redoing my springs before I post more pix. They didn't turn out like I wanted

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •