rustler won't start
I have used ez start,yank eleminator and starter box nothing works.I have tried lots of plugs gas nothing works.
Have you adjusted the carb? Checked for loose head bolts?
If you have adjusted the carb then most likely it is way off.
Look this over I have included the factory settings and the place to make the adjustments. Its something that I did for a web site.
[This message has been edited by Nitro Chicken (edited 01-29-2001).]
that just hapend to me today what i did ws kjeep pumping the primer and poling on the thortle arme as to rev it as i was krinking the enigne withe the ezstart
make sure the glow ploge is good
see if any one you know has a glow plug igniter like a hot shot. this might help i know if your plug isnt hot it will not start
GO NITRO OR GO HOME
check all the bolts and screws on the engine and engine mounts, try a hotter glo-plug, change fuel brands, use a glow driver when using the ez start cuz the built in one draws alot of power from the motor.