+ Reply to Thread
Results 1 to 8 of 8

Thread: urgent help!!!

  1. #1
    RC Racer
    Join Date
    Nov 2002
    Location
    neath
    Posts
    123

    urgent help!!!

    i was running my pede today,it was ok.
    i got it home and tried to start it, it started first time i throtled it a bit while holding ezstar button the n when i stopped pressing the button the engine cut any ideas !!!!!?

  2. #2
    RC Enthusiast
    Join Date
    Feb 2003
    Posts
    26
    got trash in the air adjust screw? THey dont always start up easily... do you have a hot shot? or somethign to get the glow plug going? Trying holidng your finger over the exhaust a couple seconds then releasing it.. Mine can be a pain to start.

  3. #3
    RC Qualifier
    Join Date
    Feb 2001
    Location
    wales uk
    Posts
    846
    i knew hed post a post like this and that he wouldnt tell the whole story
    he is running without a gasket and way to lean because his engine cooling head has gone from dark blue to light blue in the space of 3 months, with my maxx i ran like he did with a gasket thow:P and my head went light blue after about 6 months

  4. #4
    RC Racer
    Join Date
    Aug 2002
    Location
    Ohio
    Posts
    138
    If the cooling head gets too hot it fades. mine did in about 3 months too. thats when i was a newbie. you have to set your engine just right and not run it too hot. if you dont have a temp guage, do the spit test. spit on your cooling head, and if it sizzles off really fast, its too hot. it should just evaporate. your engine should run about 280-285 degrees, not exceeding 350 degrees. be easy jonathan morris.

  5. #5
    RC Enthusiast
    Join Date
    Feb 2003
    Posts
    26
    so a temp guage would be bennificial when tuning.. my head is already faded blue when i got it.. i also noticed that nitro wash made it fade more.
    Nitro Stampede , MIP stinger pipe, Trinity air filter, boca green bearings, T maxx fuel tank, traxxas big bore shocks, 2055 servo on throttle, dynamite fuel filter.

  6. #6
    RC Turnbuckle Jr. Klitch's Avatar
    Join Date
    Jul 2002
    Location
    Benton City WA
    Posts
    3,003
    whoa there sparky, i thought it was 220 - 260 not 280..
    need m16 help/opinions? shoot me a email or icq me (click profile)
    http://community.webshots.com/user/klitch
    More pics - http://users.adelphia.net/~cledab/

  7. #7
    RC Racer
    Join Date
    Aug 2002
    Location
    Ohio
    Posts
    138
    so did i klitch. i called TRAXXAS and thats the numbers they gave me!

  8. #8
    RC Enthusiast
    Join Date
    Feb 2003
    Posts
    26
    Heck traxxas's website said 300+ range for performance. I finally got mine tuned in right.. from what i read i needed more fuel becuase of my pipe and all. Now it runs really well and its hard to keep wheels on ground. I need a wheelie bar bad! I ditched my electric start.. I like the pull start better.. less on the truck.
    Nitro Stampede , MIP stinger pipe, Trinity air filter, boca green bearings, T maxx fuel tank, traxxas big bore shocks, 2055 servo on throttle, dynamite fuel filter.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts