+ Reply to Thread
Results 1 to 7 of 7
  1. 02-06-2001 11:44 AM #1
    nitro stampede
    nitro stampede is offline
    RC Competitor
    Join Date
    Jan 2001
    Location
    MARYLAND
    Posts
    79

    Post wont do wheelies???

    everyone says the stampede is wheely crazy,well mines the exact opposite.the only way it will ride a wheelie is if you hold the front end up and throttle it,then it rides a wheelie.u had this problem????please tell me how i can do wheelies from a standing stop.THANK you.
    Reply With Quote Reply With Quote
  2. 02-06-2001 01:14 PM #2
    2 Muddy Flying Trucks
    2 Muddy Flying Trucks is offline
    RC Qualifier
    Join Date
    Jan 2001
    Location
    New Orleans
    Posts
    330

    Post

    i have the opposite problem with mine, i cant keep the wheels down, im proly gonna move the reciever pack

    ------------------
    Fear This Ford Boy; Chevy454ss
    Reply With Quote Reply With Quote
  3. 02-06-2001 04:43 PM #3
    yokozuna4x2
    yokozuna4x2 is offline
    RC Racer
    Join Date
    Jan 2001
    Location
    burlington,nc,USA
    Posts
    196

    Talking

    hi all. i have all 3 of my n-pedes geared 18/70. 18 is factory bell too.
    mine has no problems pulling wheelies. the other weekend my nitrogravedigger was doing a fine wheelie "dance" till it almost crashed and i had to let off to correct it. this was at monsterjam on the 26/27 of jan...

    ------------------
    HAVE YOU FLOWN A STAMPEDE....LATELY??
    Reply With Quote Reply With Quote
  4. 02-07-2001 12:06 AM #4
    waldo_74820
    waldo_74820 is offline
    RC Competitor
    Join Date
    Jan 2001
    Location
    Ada, OK USA
    Posts
    95

    Talking

    well man mine is whas kinda the same way till I put a stinger pipe on it..And it will still vary from day to day..some days it will just pull a wheelie from a standing stop. then some days you have to hit a little bump to get the front wheels up..it all mainly depends on how your engine is tuned. you may also make sure your slipper clutch is pretty tight. also try leaning up the bottom end a little this will help get out of the hole quicker and hopefully pull wheelies.
    Reply With Quote Reply With Quote
  5. 02-07-2001 12:26 AM #5
    poopie
    poopie is offline
    RC Qualifier
    Join Date
    Jan 2001
    Location
    north wales, pa
    Posts
    321

    Post

    tighten up yout slipper clutch(not all the way). if that doesn't work. check if your engine is bogging out when you punch the throttle. the adjust your engine accordingly. maybe your linkage is sloppy also.
    Reply With Quote Reply With Quote
  6. 02-10-2001 11:22 AM #6
    RaReKiNd
    RaReKiNd is offline
    RC Competitor
    Join Date
    Jan 2001
    Location
    Mo. USA.
    Posts
    95

    Talking

    ont know what you all are doing wrong but i cant keep my Pede from doing wheelies.It kinda sucks too!!!Dont get me wrong wheelies ARE cool,But when you need to stear ant they pop up out of NO WHERE they kinda SUCk.I had to adjust slipper clutch so i could control mine.And its been that way since i got it 2 1/2 months ago.
    Reply With Quote Reply With Quote
  7. 02-10-2001 06:36 PM #7
    LifeIsGood
    Guest

    Post

    i have the same problem as the other guy...mine wotn pop a wheelie ever .. i tightened my slipper clutch and upgraded to a tuned pipe so maybe it will now work if you think it sucks to pull a wheelie, maybe richen your settings? either that or trade yours with mine..its like there waits on the front of mine or something
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules