Search:

Thanks a lot guys, 'preciate it! :thumbup:

So I need a little help. I am looking for the part number of the (4) bolts which attach the rear bulkheads to the chassis. Before I get berated, I did look for these in the part explosion .PDFs, but...

The Traxxas Slash Ultimate comes with blue aluminium rear hubs which are clocked to be at 4 degrees of a toe in. The regular plastic rear hubs are made to clock the toe in at 2.5 degrees. Your truck...

GenX, you just made my day with the most awesome looking Emaxx ever!

Actually, it was sort of a mundane break. I was out bashing a bit with it and on the way back the car started acting clunky. I went through and checked both of the diffs, and they were fine. The...

I think I broke my Mamba Monster motor today :((

Can I get some pics of this thing with both sets of tires on and the body? I am thinking of going with these tires, but wanted to see how the whole thing looked together. Thank you ^_^

Why are the tires in the front so much wider than the back? Is that just how large the trenchers are?

I would recommend using the Traxxas progressive rate springs, a thicker shock oil (I like 45 wt. in rear, 35 wt. in front), and then make sure you use the spring collars which will really tighten...

I have installed the traxxas bulks, and they have really saved my car from the damage. The downside is other parts breaking (hinge pins, bolts, etc.) which can sometimes ruin the bulkheads.

As an off the cuff, I would say to disconnect 1 of the servos and then try the same thing you did in the video. Repeat this again with the other servo to see if there is an issue with either 1) A...

Occasionally when charging a LiPo, the peak voltage will exceed 4.2 volts temporarily (I believe up to 4.23 volts per cell) and the charger will discharge this higher voltage toward the end of the...

I melted my stock center drives as well, hence the need for an upgrade :)

You are the man Josh, thank you!

We are trying to see if the RPM A-Arms, RPM Hubs, and the CVD's cause problems, not the traxxas hubs. But thank you anyways :)

The Traxxas Part number for these CVD's is 5151R correct?

What are my options? Do the Traxxas Steel CVD center drive shafts work on a 3908? I am not sure because the description on the buytraxxas site only says it works with the 3905. Thank you for the help.

I put a center diff in my MERV and it was easily the best upgrade I installed (it really keeps it down and improves cornering a ton). I am sure you end up losing power, but I honestly have not...

I recently broke my stock shocks and upgraded to the big bores. I noticed that the stock white springs are much stiffer, so I put those on my new big bore shocks. I also just noticed that according...

So is this confirmed or not? I am running RPM Arms and Hubs, but I am looking to upgrade to CVDs shortly.

I was thinking more on the motor timing side of things, wondering if any one has found a setting other than the default one that will give a better top end speed.

Not sure if you knew this, but the current firmware version is 1.34 (I think). Also, this was meant to talk about the actual settings people use on their Emaxx such as the punch control and motor...

Hey everyone,

I am wondering what settings everyone programs into their EMBE. Let us know what settings you like to use and why so we can get the most out of our speed controllers!

Just ordered my set. Thanks a bunch guys!

Great recommendation!!! Do you know what the part numbers are for the front A-arms?