Search:

what about the lipo reciever batteries they have out there?

ok ive seen the lipo receiver batteries all over the internet for sale. will they work with the 2.4 link system?

i have a splitter for the old radio systems that allowed you to run 2 steering...

dos anyone know of a company that makes a 12mm to 17mm wheels hub adapter for the mini? will the one for the slash 4x4 fit? i got some buggy wheels i would like to try on it.

the motor i am looking at only allows 2s and i have blew up 3 3s batteries fromm different brands but might try another one. does the center diff help or hurt top speed?

whats the biggest pinion i can put on a e-revo with a 1/10th motor mod?

i am not worried about temps i just want speed. it is a 4200 kv motor with a sidewinder esc on 2s. will be upgrading to 5700...

i lik the road rages but mine are the wide ones so they grip pretty well. i am prolly going to end up with the summit body lowered as fr down on the post s possible

could you lower the body so it looks like a low riding summit to get rid of the airgap between the body and chassis?

i really want something different than anyone else. i dont lik the stock body or bug bodys - just doesnt appeal. anyone got a pic of one with the summt body or slash body on it?

I gotta a mini erevo and want to make it a fully on-road one. i put mini summit wheels with proline road rages and would like to get opinions on what body to run. i want something different. give me...

whats the screw size for the screws that hold the rear brakes to the tranny???/ i lost them in my box and need to know which size they are to order new ones or possibly find the correct ones.

i got the st racing one it works great but dont spray it with wd-40 then run it haha it will melt the pads and destroy the clutch....oops haha my bad

i got my revo with a picco .26max and trinity pipe and header. i can get it to run pretty well and tuned almost perfect with tmps right around 225 at half tank. but after about 5 minutes or so it...

richening it up worked thanx now having problems with my nut on the slipper backing off.... gotta change it....

3.3 dies at full throttle or close to it. is it too lean or rich?? it has no problems at idle and it is running fine. when you go to get near full throttle it dies. i am unsure so please help thanx .

my friends slipper pads keep breaking on his revo. he has went through4 in 3 days from the pads breaking off the little studs. what could be the cause??

i got that roll cage. it is awesome but any moods like adding a wing and wheelie bar and a bigger engine and exhaust all lead to problems that take a little engineering to fix and get to work.

what fluid is recommended by you guys? i reall yhave no idea. i got a center diff and it has stock fluid in it. i have no idea if it is good enough. does some company sell like a pack of 5 or so...

should i get the 2 or 3 shoe setup and will the internals for the diff for the embe fit directly into the stock revo diffs?

ok i got a revo 2.5 with the picco .26 max in it with about a quart through it after break-in. I have the forward only conversion and i put in either close or wide ratio gears at the same time i cant...

i have two pullstarts. i have the resonator right now i was going to break the engine in and then get a THS exhaust after i sold some thing s maybe i will wait to break in

i have an OS header on now.

the pull start will pull but wont recoil back in without a lot of wiggling the string

i am trying to break in my picco .26 max and have hit some problems.

1. i cant get it to strt even after heating it up and have a good glow plug and brand new bottle of traxxas 20% i can get it to...

i have done some reading and came up with:

a) heat cycling
b)traxxas way
c)traxxas way but double the tanks i.e. 2 tanks 1/4, 2 tanks 1/2 etc...

what is the right way since it is sort of a...

i hav an os pipe to but on it

i got a picco .26 max and the engine mount needed. Do I need to do to the driveline before installing the motor?? I am planning to grease all the driveshafts and regrease the gears that are supposed...