Search:

thanks for the link.. guess i didnt look hard enough :lol:

found out my carb is stripped where the HSN needle holder screws in. cant seem to find a part number for the carb body or even the whole assy.
how do i go about getting a new carb? is there any...

???is there a fuel tank issue? what about the stock tank makes the engine run lean???

if you pull the bearing there will be a bearing code or number stamped somewhere on the outer race. write that down and look these guys up. (Pervis bearing) located in Dallas Texas.
they sell these...

clear finger nail polish works well also. holds good and tight but alot more giving when the screws need removing.

very nice!

looks more like the associated monster truck to me..

the slipper clutch will make kind of a whistling or chirping sound upon heavy accel.

looks like you have either a bent shock shaft or a broken shock dampener plate.:eek:

DOH!!!! it was the pillow ball retainer. guess i didnt see it in there. man my eyesight is starting to go. old age blows!!!! :lol: :lol: :lol: :rolleyes:

noticed that the steering knuckle on the left tire is very sloppy where the ball on the lower control arm pops in. is there a way to tighten that up? looks like there is an adjustment on the ball...

think i may have licked it. started thinking about how the fuel was moving through the line very slowly. this morning i tried to prime by blocking the exhaust dump briefly to see if the fuel would...

thanks for all the help and support. i checked the head bolt last night. only one took about a 1/4 turn to tighten it up. im gonna go ahead and pull it and check the back plate and head gasket, crank...

build a foam pit with a huge launch ramp in front of it. the cars will survive but you can get some seriously huge air. high jump competition or even backflip comp.

that is exactly what im looking for. thanks alot. ill do some searching on the remote recharge set up. thanks alot!!:D

never thought about looping the fuel line.. good advice. i do have a Snap-on temp gun in my shop. when i was checking it the other day it was usually around 265-275. a few runs hit 315. so i shut it...

how about a tractor/truck pull. or some skate ramps to kill the cars on.:lol:

the rechargeable servo nimh pack. i was told by my LHS that the MAXX came with the pack in it. it didnt, but i plan on getting one. does it fit into the battery box on the MAXX? does any one make a...

ill see what i can flush out. thanks for the support guys!

i have an older .15 rustler. it would wheelie all the time if i were in the grass. occasionally on the track it would get a few small wheelies when i would hammer it out of a corner into the...

i know its getting hot. after the retainig tangs on the head slider (plastic ring) melted and it flew off. i tried the water drop on the head the water pretty much bounced off the top of the cooling...

i cant get this little 2.5r to tune out right. one miniute it runs great. seems that its all dailed in good. then suddenly after a few more high speed runs it hesitates on accel and wont hit second...

still stock. but only had it a week!!
http://i23.photobucket.com/albums/b377/supermoto150/Picture005.jpg
http://i23.photobucket.com/albums/b377/supermoto150/Picture006.jpg...

neighbors!!??? ill shoot at my kids!! :D

firing mechanism for a roof mounted mini potato gun :lol: