Search:

Sure are. The Summit uses Long Travel rockers and the Merv uses Progressive rockers.

FYI: LT rockers will not work with the Traxxas extended rear arms. With that said, I have a set, brand new, in package. Pm sent.

It cogges from 1 to 100% throttle. I pulled the motor, hand spin is free, and throttle response is good. When I match it to the spur and set gear mesh, it cogges out. As if it doesn't have enough...

Stock 380 BL motor, 50t Spur, 28t pinion

I put 100k diff fluid in the front, center and rear diffs. With a new, fully charged 3s, it will just cogg all over its self... The motor spins free, I...

What about Maximizer 17mm adapters?

Good looking Merv. I second the t-bone bumpers and center skid.

Hmmm... Some type of dust cover sounds like a good idea! I'm running stock ESC & BL, so no where near over powered. Back on topic: I origionally decided to get CVDs when the plastic shafts on my 1/10...

The biggest reason I splurged for CVDs was, one day after ripping up the local baseball diamond I noticed a lot of drag in the driveline. I took the t-bone and skids off & found rocks/gravel wedged...

A center diff will better distribute power to the wheels, so you should be able to get a stronger launch off the line

I swapped the rockers back to stock and all is good... I wish I had dyed the stock rockers now...

I'm a pure bread basher, but I am building this for speed as well. I have no idea what I'm getting into, (I have a good temp gun) I'm geared at 28/50, I also installed a center diff & filled it with...

I think I'd rather have extended arms than the LT rockers. Does anyone dissagree?

The rods are stock length. I now have the pivot balls bottomed out in the arms, and the carrier pillow caps are nice and tight. I tried two of the larger bearings inside of the axle carrier, it made...

I'll double check the rod lengths.

Are the Summit CVDs longer than the Revo CVDs??

I am rebuilding a 1/16 E-Revo VXL. When I snug the wheels down, the rear CVDs fall out the drive cups.

Here are the parts I am using:
• Traxxas Extended Rear Arms for 1/16 E-Revo
• Traxxas...

It doesnt sound like Traxxas to not honor their own warranty... I'm wondering if *lost in translation* the cost to ship the Tx to Traxxas out weighed the cost of buying a replacement. Either way,...

Is there a pinion/spur gear chart similar to some I've seen for 1:1 gears? Like below
http://www.superlift.com/images/misc/gear-chart.gif

True.. lol. A dab will do ya

Thats no joke! The stuff squeezes out the sides and makes a white mess...

FYI: Traxxas includes enough paste with their heat sink for up to 5 applications.

I used 1 box (powder) and dyed everything black

Hahaha!

Its easier to.. not attract security, with an electric vs. nitro. I do speed runs behind Walmart. Sometimes I'll run on an empty level, usually at the top, of the mall parking structure,...

Well said!

The 70/30 switch on the Tx changes the physical sweep of the throttle trigger. Stock is 50/50 sweep. It doesn't change the profile in the ESC. The reason your Merv takes off in reverse when the Tx is...

sure, a blue lexan color mixed with a red lexan = purple lexan

The stock ESC's fail safe is set to maintain front wheel direction & drop motor rpm to naught. That's all we get...

When I switch off my Tx while the Merv is on, the Rx will blink red. I have also...