To the top,any offers?
Type: Posts; User: jeninjohnk
To the top,any offers?
open to offers
to the top!
up for sale is my 1/10 summit. i used it mainly for crawler and playing in the street. it comes with the following: 2-gen ace 5300 mah 2c lipos and 2 lipo alarms, it has the 2.4 ghz rx/tx, ...
i put the ofna diff lock in my summit---I LOVE IT! i run a 1/10 summit also. the diff lock fluid allows very little slip-u have to have some slip if u plan to bash it. i did notice the turning...
looking for the micro's. sct,summit,revo--we need a vehicle that can be run indoors in a smaller space. my summits to big-^_^. my MERV's to fast:woot:. a micro would get my kidd off my back!
That is some funny s__t!
connectors are pretty cheap-- i just didnt want to wait to charge my lipos--
at this time i'm going to stay pretty firm
thanks jamann-- u mean put washers between the pin and the bearing? will it be loose in there? i'm still waiting on parts so i haven't tried them out yet.:(
i went lipo so i'm selling off my nimh packs from my summit. there are 4 total. 2 with traxxas connectors and 2 without-i used the connectors for my lipos. i removed the ends right at the plug so if...
sorry about that, i did it from my phone. the wheels came off a revo and the he mentioned 14mm hexs. so i tried it on my axle+ it slide on perfect!:) the hubs look like they take the cross pins...
I i talked TO THE SELLER. He said it. Was the revo 14mm. Where can i get thw cross pins and lock nuts. Is.that a traxas part?
got some weld wheels for my summit with the 23mm adapters. bought them used. they look like there's some kind of roll pin set-up? they were supposed to be off a revo so i figured they would fit. ...
for me- the summit is a great go anywhere truck. u really need somewhere to run a summit. forest perserve,rock trails,etc. somewhere thats rough- thats when this bad boy shines. zipping up and down...
dont see any in the back of the vehicle on mine
mine are even--spacers in the back of the arm. only about 1/8" of rod sticking out the front.
for me--- motor mounted right up, had to mount the ESC. i just used a piece of black acrylic.cut it to shape and good to go. just be mindful of your heavy trigger finger. my first run on it- i...
i like my plastic one. it wont look bad when it gets scratched up!
thanks bassman57! thats what i was going to do but, wanted to check.
got a tekin set-up.looking at the factory motor mount-there are 2 holes that line up. on the motor there are 2 small+ 2 large holes that will work. which do i use? if i use the larger ones the...
hope this can be done.. count me in also