Search:

With 1 battery pack included in the mini revo, you'll get about 15-20mins on a good charged pack
You can always get more batteries to have on hand when the first one runs low.
Stop driving when...

+1
Anything 600 above is not a good starter bike. You can get a 250 and learn the basics on that for a season than upgrade to a sports bike. The Kawasaki 250 looks almost like the ninja but is...

Just an option to see if the sensor is reading the magnet.
Take the spur gear cover off and manually hold the sensor in ur hand while giving thorttle(slowly) to see if there's a reading.

I had...

Do you know if the telemetry magnet is seated properly in the spur gear?

If it is then the rpm sensor has to be in the spur gear cover nicely. If not it'll give false rpms and won't work properly.

Out of curiosity Peter, how long did your mmp have that weird jump start problem.
Mines doing the same thing, I just noticed it the other night.
So the v1.39 has Been working good?

Geared...

The mmp with the v380 will make it a totally different mini.
You'll be happy with the power n better braking

When I changed over to the TQi I had no problems setting up the anttena like the picture on the right
My other mini was like that from the factory (tq 2.4).
I actually just copied the mini I have...

I have a pair of lipos I check every 2months, been there since June 2012(9 months). Left it at 3.8v/cell. It's reading 3.78/cell the last time I checked a week ago.
My LHS has a few guys there and...

School #1
More courses and French emmersion
Great options on different tech courses
Another language is always a plus.
You'll be greatful later on when you have another language you know

You...

You might have to shim the opposite side of the ring gear
Depending on the mesh
For me I had to shim both sides on hr bulkhead

When you take the skids off its Probally giving it a bit more space between the ring n pinion
When the skids are on it makes the bulkhead halves join together a bit more to give you that clicking....

What axle/knuckles are you using?
If anything besides stock pivot ball caps make sure there's a lil play in the pivot balls and axle carriers
Not too tight n not too loose.

Yup. Its a bit stiff to where it always stay like how it was packaged.
Only used mine a lil over a dozen

If you do find a suitable material you can always spray some frabric guard(repels liquid)
The shroud has a plastic feel to it. Kinda hard to explain until you actually see n touch it
Good luck on...

Nicely done.
Liking the narrower wheels up front.

You can set the end points for less throw when using those g locs

You'll need stiffer springs also

The mini your talking about I believe

If your itching for better brakes than you can try the maxpro
If not, just enjoy it and you'll get used to the braking.

The first thing I noticed when I did the mmp swap was better braking and overall speed.
From stop or rolling the punch is a whole other rc
This was with the stock v380 motor.
Factory settings on...

Steering post.
Comes in 7043
Or an aluminum one by itself.

Edit - the 2 screws for the saver don't over tighten. Tighten them n back off half a turn. I find it doesn't stress the saver action...

Don't let 1 traxxas rep change your mind.
Everybody has a pickle up thier behind once in a while.
Tomorrow will be another day to leave that pickle behind.
Summit is a killer rc to have

That looks like what I just cleaned up from my son scribbling on the floor.
But with 5 other colors. Literally 10 mins ago.

I'm looking into the GPM titanium rods. I've heard that the rod ends are not the greatest and should stock up on those
I am using TRX aluminum ones and am happy so far.
Just want some users to...

Class is now in session. In the hallway. Lol
Give the maintenance/janitorial guy a spin...then hopefully he'll clean it up.

Worst case you can use stand off spacer with longer screws.
M3 x 1.5 or thicker.