Search:

If you dont like to much heat, i suggest you move to England, there is never any sunshine here :mellow:

So children, do you know what the moral of this story is? Dont play with real cars ^_^

Only ever done it once, with my Supermaxx, it wasnt very hard but the truck weighs a fair bit and doesnt give either, like plastic bumpers do. Needless to say, it took some skin off of my ankle.

Hey guys, just thought i would post some picture i took at the Maxbashing track last sunday, hope you like :)

http://www.emorc-media.com/maxbashing_pictures/13.jpg
...

I have just put an old 20t clutch bell i found laying around in my parts box onto my RB. It will not work with a 40t spur gear as the fit is way to tight, but fits nicely with a 36t, you could...

I would post some action shots but they are not of traxxas vehicles so they wont be allowed....

You're moaning about the track costing $5 a day? :rolleyes:

If the motor is sluggish when pulling off then your low speed needle is too rich, lean it out untill the truck has a decent pull away speed.

If your engine is cutting out at high speeds and...

You want to look for batterires with a high mAh, im pretty sure you can get some around 2500mAh, although they may be AA sized, but you can still make a hump pack from them :cool:

Having a track to run at, in my opinion, is the best thing that can happen. I got out of the hobby a few years back because i had no one to run with or no where decent to run, but since a track...

Its very hard to understand sarcasm in text form :p

I'll have to get the pictures for you tomorrow. The shock towers i am using are the Supermaxx towers.

A lot of guys use the wing from a Mugen MBX5 buggy, but for mine i used a Hyper 7 wing, as i have a few spare from my buggy.

Here is a picture of mine, ill get a picture soon of how its...

Another with the shell on.

http://premium1.uploadit.org/Berra85//trx_guts_2.jpg

http://premium1.uploadit.org/Berra85//trx_guts.jpg

I cut out every other tread on the tyre like in the pictues above and found that on flat ground the ride was very bumpy. Not worth it in my opinion.

*waves hand*

My Maxx again, i would have edit my original post but i cant after 60 minutes :mellow:

http://www.emorc-media.com/20s.jpg

Here is a little video of me testing my diffs too 23MB)

My Maxx :)

http://www.emorc-media.com/truck_5_small.jpg

Havent they got a rules and regulations page? If so, it may be worth taking a look and seeing for yourself.

Yup, it can do that. My Supermaxx has cost me just over £1000, and thats more than what i will probably spend on my first car :fear:

I doubt it will be lowered, the T-Maxx and JATO are totally different vehicles, so its not like its replacing it.

They filter out large particels, but dont filter out the very fine stuff, which is bad :(

I'm interested, but see no point in PM'ing you, you may aswell tell us here where to get it from, to save yourself and us having to go through the PM route.

They are useless for nitro models.