Search:

Wow. What a lucky guess. Yeah as soon I get this TQ system and its all programmed in, I'm planning to put lights. Thanks a lot man.:)

Hey Guys. I just ordered the Traxxas Link 2.4 ghz Radio Receiver for my Rustler VXL and I would like to know before it arrives at my house, Which channels does the Servo Connection and ESC connection...

Ok. Got it. Thanks a lot Jimmie.

I came across this video on how this kid linked the receiver to the controller. The way he does this on this particular video, did he also program the radio control to the ESC when we he was holding...

I have a 2s 6500 Mah Lipo battery and just want to know when I have friends or guest come over unexpectedly and want to check out my Rustler for the first time, can I charge my Lipo battery for like...

Ok. Cool. A lot of Good Info. Thanks. Are they pretty durable on street too?

Hello folks. I have the Rustler vxl with 23/86 Gearing with the stock tires. Now if I was to replace the stock with the 2.8 size trenchers, I know I would have to gear down a couple teeth on the...

A remote control that can make an RC car do burnouts while consistently spinning the back tires. :)

Awesome. Ok. I actually have the Pillow Balls. Now I just gotta get those RPM rod ends. Those little suckers I have on now come off often. I appreciate the feedback.

Took them off with the traxxas turnbuckle wrench to be exact. :)

Just wanted to know if the Traxxas 5347 Long Rod ends are good to get for my rustler on the Tie Rods? Or are there better ones? Was going to make the purchase of the traxxas ones(5347) but just...

I see. So looks like i'm going to have to get an exacto knife and lexan scissors. Also do I really need to use simple green and put the new tires in hot water? I thought you do that only when taking...

I actually used one of those little traxxas wrenches to take them out and insert new ones with a hex screwdriver surprisingly. These are the needle nose pliers I have, didn't work because can they be...

Ok. Thanks a lot bro. I'll consider that.

Thanks alot guys. I'll try the dish soap method first. Sounds like the easiest way. Doing this because I'm adding the RPM Shock tower and need to remove the regular size camber link ball ends and put...

Recently I removed my front alias 2.8 tire from the wheel on my Rustler. Because soon I want to add Pro Line Trenchers all around. You guys can check out the video link I posted on youtube to see if...

I been trying to remove the rod end balls from the VXL Turnbuckle Links. I ended up bending the one of the turn buckles. Is there any way or tool I can use where I can take the balls off? I was...

SPC. my bad. sorry for the late post.

Ok. I see. I actually never added on pre-load spacers. Just been running the rustler as is. I'll probably add an extra spacer, one on each side on the rear and an extra one on each front side of the...

I took my Rustler to a nearby track and when I would go off jumps with it, It kept on Nose Diving and landing upside down right after flipping. It would do that almost every time. It was so...

Hello everyone. On my rustler I have had a 20 tooth pinion gear for the longest time on. I noticed it was sort of lacking top end speed. So i switched it out with a 23 tooth pinion gear and it...

Ok. Cool. I'm sure a little more punch can really make the rustler that much more fun to use. Thanks alot guys.

Just want to know, a 2s lipo 6500 Mah that has a 65C rating be okay to operate with the VXL Rustler without over heating anything? And would I be looking at more speed and power?

Thanks vladsly. I'm feeling more confident owning a lipo with these recent feedbacks. I also might just get a 2s lipo instead of a 3s since I dont have to worry about heating issues. But then 3s is...

Thanks for the replies. Really appreciate it. I'll try to have as much fun as I can when I order the big monster 3s lipo.