Search:

Type: Posts; User: ryan8625

Page 1 of 2 1 2

Search: Search took 0.08 seconds.

  1. Replies
    2
    Views
    211

    rpm or traxxas aluminum carriers?

    So my friend decided to run into my pede with his slash and broke my rear bearing carrier off in which my wheel flew across the street, so what's the best way to go with a replacement, all aluminum...
  2. Replies
    6
    Views
    484

    11.1v lipo vs stampede

    What up, so I just got a couple of lipos and wanted to know what I may need to make my stampede hold up better when running 11.1v lipos and also some 2s 7.4 also. It's stock right now and so far so...
  3. Thread: LiPo

    by ryan8625
    Replies
    20
    Views
    283

    Well I heard all the hype of the spc and ordered...

    Well I heard all the hype of the spc and ordered two 2s 7.4 25c 5000 and I'm very disappointed , the stock traxxas 3300 nihm out of the box had more power. I've only ran 2 runs through them but it's...
  4. Replies
    8
    Views
    838

    Yea, you have to run both right? Or could I run...

    Yea, you have to run both right? Or could I run two 7.4 Lipo's and get a LVC, it s the original emaxx so a little outdated for lipos, not sure?
  5. Replies
    8
    Views
    838

    8.4v on Novak evx?

    Just wondering if anyone has ran 8.4v 7 cell on 3906 with novak 14.4v ? I know it a little risky but I want more power and heard that it could be done not sure though?
  6. Hitec X1 Aplus charger and SPC lipos HELP??

    OK so I finally got enough money and bought a Hitec X1 Acplus multi charger and balancer. Cost about $60 then got SPC 7.4 lipo and 11.1 lipo. Charged the 7.4v 5000 mah at 5.0 amps for about 45 min. I...
  7. Replies
    6
    Views
    151

    ok, well sounds like i'll keep it at 19 for now....

    ok, well sounds like i'll keep it at 19 for now. On the SPC I got a hitec charger and when I charged it for about 45 minutes the battery wasnt even slightly warm at all, and didnt really even...
  8. Replies
    6
    Views
    151

    19 vs 25 and other pinion gearing????

    Ok just got some lipos, 7.4 spc 11.1 spc and was wondering about changing the pinion. I do lots of bashing, sometimes a track every couple weeks, whats the best gear setup?

    Oh yea amp charge...
  9. Replies
    37
    Views
    2,693

    How hard is to install? looks pretty simple from...

    How hard is to install? looks pretty simple from watching the youtube video, how is the durability as far as bashing and track runs? I really want a more stable pede.
  10. Replies
    14
    Views
    433

    Hey what up, yea I had my first trip to mikes...

    Hey what up, yea I had my first trip to mikes last week, indoor track was all for racing looked like a bunch of tools up there with too much money and no lives practing so I went outside the 8th...
  11. Replies
    5
    Views
    746

    Dual 700 Kershaw designs?

    Just wondering if anyone has got the dual 700 kershaw designs motors... I was thinking about checkin them out possibly for 89.99 seems pretty sweet at least on you tube.
  12. Replies
    7
    Views
    923

    sweet sounds good

    sweet sounds good
  13. Replies
    7
    Views
    923

    I want to use Nihm because I dont think you can...

    I want to use Nihm because I dont think you can use lipos with that esc? I wana go with 5000 mah but what brand has given the best results or does it matter?
  14. Replies
    7
    Views
    923

    Best battery for 3906?

    Just wondering which battery to get and best results for my emaxx 3906 with novak evx 14.4?
    thanks
  15. Replies
    8
    Views
    204

    Ok will do, a guy from the rc shop said I could...

    Ok will do, a guy from the rc shop said I could take half the oil out of the shock and could possibly help, anyone heard of that before? Thanks.
  16. Replies
    8
    Views
    204

    Lowering the suspension????

    Hey whats up? So went to the track and it seems that I need to lower the suspension to get a lower senter of gravity. It was all over the place and was a little unstable. What can I do the help to...
  17. Replies
    7
    Views
    2,068

    OK looks likenthe vxl attempt is the way to go, ...

    OK looks likenthe vxl attempt is the way to go, mainly for track running.
  18. Replies
    7
    Views
    2,068

    Best brushless setup for slash 2wd?

    Hey whats up guys, just got a used slash 2wd thats less than a year old and want to quickly upgrade to brushless, whats the best one and for the money? On a limited budget but want something...
  19. Replies
    3
    Views
    345

    both would be good, which for speed and for...

    both would be good, which for speed and for torque?
  20. Replies
    3
    Views
    345

    Gearing question for 3906?

    Hey just got a 3906 and was wondering if anybody has any advice on gearing? I opened up the gear box and saw 66T and I counted 19 pinion I do believe. Im still new to the emaxx so any advice on...
  21. Well its looks like I'll start with the 2s lipo...

    Well its looks like I'll start with the 2s lipo and see what happens, any all around good gearing? What's a good lipo charger? I've heard that spc makes a pretty cheap 2s lipo any suggestions?
  22. 2s Lipo or 3s lipo vs 8.4v 5000 mah on VXL????

    Ok so just got a vxl and am starting to get the hang of it and have some battery questions. My friend is running 3s lipo's in his slash and seems like everyday something is burning up or broken. I...
  23. Replies
    8
    Views
    878

    3906 upgrades?

    Just bought used I believe 3906 emaxx with titans with 14.4 esc. What can I do to get more speed and power that's not to exspensive. I've only had it two days and very new to the sport.
  24. Replies
    17
    Views
    247

    What's the benefits of the 32 pinion gear? I'm...

    What's the benefits of the 32 pinion gear? I'm really just at the track or field by my house.
  25. Replies
    17
    Views
    247

    Ok, I took off the case to the spur and pinion...

    Ok, I took off the case to the spur and pinion and everything looked fine, how do you take out the screw with the spring on it off, i got the three screws out.. sorry im new at this. Still hearing...
Results 1 to 25 of 30
Page 1 of 2 1 2