Search:

Type: Posts; User: traxxasvxlbasher

Page 1 of 17 1 2 3 4

Search: Search took 0.25 seconds.

  1. i'd recommend 40wt oil and just play with the...

    i'd recommend 40wt oil and just play with the pre-loads traxxas provide you and mounting the shock in 1-2 holes inwards the diff.
  2. Replies
    6
    Views
    61

    i dont think its the speed control because the...

    i dont think its the speed control because the steering turns on and the power go thorough the esc. calibration would resolve your problem. here is a link, skip to 1:20 or watch the full video, its...
  3. yes they will fit, they are the same gears but...

    yes they will fit, they are the same gears but with an extra little piece to reinforcement.
  4. there is the xo-1 kit that would reinforce the...

    there is the xo-1 kit that would reinforce the diff:
    http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXBXRL&P=7
    but it would be enough just to put in some fresh fluid and cleaning.
  5. yeah they are softer, you have to make sure to...

    yeah they are softer, you have to make sure to have a good set of tools which i have.
  6. YEAH, i would get stainless steal screwz like...

    YEAH, i would get stainless steal screwz like demon told you, i have them for my slash 4x4 and the left ones i did half of the p4de
  7. Replies
    33
    Views
    236

    happy birthday bro! what pinion and ring did you...

    happy birthday bro! what pinion and ring did you installed? and what bearings?
  8. the pic is unavailable. EDIT: perfect now

    the pic is unavailable.
    EDIT: perfect now
  9. Replies
    12
    Views
    143

    i wouldn't buy the King headz motor mount because...

    i wouldn't buy the King headz motor mount because they have bearing problem... buy the Hot racing one IMO. i would recomend the 17mm tho
  10. only difference is the wire length and colour of...

    only difference is the wire length and colour of the can.
  11. that steering bellcrank is for the 2wd models....

    that steering bellcrank is for the 2wd models. you want these one's:
    http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXCSRC&P=7
  12. i cant find a part number, but i ordered here:...

    i cant find a part number, but i ordered here:
    http://www3.towerhobbies.com/cgi-bin/WTI0001P?I=LXTJJ0&P=8
    if you are going to buy the funny car motor then you will need to extend the wire, thats...
  13. I atached 6.5mm bullet to the motor wires. ...

    I atached 6.5mm bullet to the motor wires.
    http://tapatalk.imageshack.com/v2/14/08/18/c0cf8160d46f4b4c8372cd63e44eac36.jpg
  14. i have the MM2 with 2400 and never got it over...

    i have the MM2 with 2400 and never got it over 150 after hard bashing and shroud, the 2650 will probably be same temp or a bit higher because of the higher kv rating also a bit more top speed. i have...
  15. Replies
    9
    Views
    179

    dont buy the full axle, just the stub axle. there...

    dont buy the full axle, just the stub axle. there is a tool in the kit when you buy the the slash. this one:
    http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXCGMP
    is the one on top left, you put...
  16. Replies
    9
    Views
    179

    you can use the break fluid method to remove the...

    you can use the break fluid method to remove the paint if you want to repaint it:)
  17. i have it. i run it geared 19/52 and have ton of...

    i have it. i run it geared 19/52 and have ton of speed and torq! never got me over 130f except once i got 150 but that was because i had motor shroud on so there was no air flow. i run 3s and can...
  18. ok, i think its there lol ! nice that it was an...

    ok, i think its there lol ! nice that it was an easy fix
  19. nice! did you broke anythting in the rear right...

    nice! did you broke anythting in the rear right side? it looks very low there after the jump
  20. Replies
    10
    Views
    148

    the one taking more airflow awy is the plastic...

    the one taking more airflow awy is the plastic cover, run just with the dusty motor shroud. it should be enough.
  21. Replies
    6
    Views
    106

    check out the slipper if there is anything wrong...

    check out the slipper if there is anything wrong there. rocks, slipper pads, alignment....
  22. Replies
    7
    Views
    129

    i also take electronics out, then i take it to a...

    i also take electronics out, then i take it to a presure washer machine and wash it, then i take the air compresor and dry it out and then spray the bearings and other metal parts with dw-40 and...
  23. yes, they are a direct fit, i have all those. the...

    yes, they are a direct fit, i have all those. the only difference with the hcg and lcg is that one is hcg and the other is lcg, all the other parts will fit directly.
  24. Replies
    12
    Views
    174

    i also have the traxxas ones rear on now on my...

    i also have the traxxas ones rear on now on my p4de witch i only had boot problem once in 1 year, so i think the xo-1 will also hold up as long.
  25. Replies
    871
    Views
    48,690

    yeah, were are you?...

    yeah, were are you?...
Results 1 to 25 of 415
Page 1 of 17 1 2 3 4