Search:

You've had those arms r awhile now digger:) in glad they're still running... Reading this thinking of upgrading my diffs


Sent from my iPhone using Tapatalk

Try fishing line in the Road Rages:)http://img.tapatalk.com/d/13/03/16/9egy3agy.jpg


Sent from my iPhone using Tapatalk

Last night with 25th pinion and 62tooth spur.. On 6s was radar gunned at 52mph flat out while wheelieing .... That is all BTW... How fast the gears say you should be doing and how fast you are...

Okie I'll check it again... Also in the application's motor settings there is no 2000kv motor option... I'm wondering if this has anything to do with it.. Also let check my tire settings.:/.:....::::...

I'm running a huge leapard 2000kv 4 pole motor, and the XO-1 speed control... 25 tooth pinion, and a 62 tooth spur....
http://img.tapatalk.com/6c093107-78b8-502b.jpg
...

Well I got all of my sensors and have fabricated a custom rpm sensor holder. All other sensors and mounts are straight from traxxas.., well I have a pretty custom power train setup and it's. Giving...

2075 are decent plastic geared servos.... If you are constantly blowing them on both sides be sure to check your EPA as well as for binding issues... If your throw is to great you will blow servos...

Those are rears... All of the mounting holes will line up you just may have to dremmel an some notches in the chassis if they are for a Tmaxx .. This does not affect chassis performance at all. Let...

The XO-1 esc requires the TQI reciever

That's abit far local pickup.... I'm interested in the grave digger would you do $80 shipped

How far from 33760

Check Fleabay

The XO-1's 1650kv is a SLOWER motor than the Maxx's 2200kv motor.... It's larger longer can and bigger magnets rotate considerably slower at equal power and is a huge Power pig under WOT..l It does...

Call traxxas customer support immediately when u have a problem!.. If you fiddle with the these controllers and receivers you may DEPROGRAM them. At which point they must be sent in.. This is...

The last set of those flex tek arms that I've seen sold was on RC tech about a year ago to a forum member named Gumelguf I think... He promised to beat the snot of them:) happy hunting!!

You may have to clear the TX memory... But your best bet is to call traxxas during business hours.. They will walk you thru all steps and tell you if there is something deeper at play.

Here's my personal ultimate edition.... Repowered with the XO-1 MMM and an extra powerfully 4 pole 2000kv 4.67hp motorhttp://img.tapatalk.com/6c093107-4ae1-0a09.jpg...

Rebind the Tx to the RX and then try to update...

I have a 2 speed revo spec tranny and a 3908 chassis... PM me for info

My TQi locked up also. Your best bet is to call traxxas.... You more than likely will have to send it in..... That's what they told me:(

HPI BRONCO ALL THE WAY!!


http://img.tapatalk.com/6c093107-409e-8d05.jpg

There is a difference in the internals = pitch and mesh of gets in the 2.5 & 3.3 t-Maxx there are also differences between the brushed and brushless version with the 3908 diffs being the strongest of...

................... WOW :) well put...

There is a chance that with that small pinion on 6s is winding your motor out. Causing ripple current to shoot back to your esc and fry it, but it's a long shot.. By any means... SEND IT BACK! or...

I used a dog bone from a Tamiya Wild Dagger in place of the front FLM dogbone... No idea how long it was:(