Search:

If you'll care to look at the Slash, you will find a lot more suspension travel so no, it would not be a rally car.

Looks like you might have broke part 5678 in the vid. If you lock your rear diff and one side starts pulling, thats it!

You have to have 24mm adaptors to run those wheels. Look at the proline trenchers in 40 series. They are perfect for the summit, I run them on axial 40 series wheels

Foams are pretty firm.

I have four of these on my slashes and they all are tweaked to some extent to work. My guess is RPM got the tooling off a bit in making these and they don't want to take the time or spend the extra...

Looks like milk

Don't cut the wire, you can wrap the excess around the outside of the plastic cover, it will look like a tightly coiled spring. Traxxas says this also affects performance but unless your trying to...

Yes, you want the blinking to stop, then your battery should be balanced.

did you flip your throttle/brake bias, this will screw it up, look in your manual and see which is stock and make sure its at the correct setting.

The center diff is going to give you more turn-in in the corners and also when you u punch the throttle for the straight you are far less likely to spin out. It also gives you improved handling in...

#39, yellow and blue bodies with MMM

you can't go wrong with that motor IMO.

The monster will turn on and run with a 2 cell lipo!

Your motor should be ok, anything above 200 is really pushing it but Castle claims their motors can withstand higher temps than that.

I have had a 10th scale mamba motor at 240 with no ill side...

I've driven a stock revo and a slash with 10th scale on-road foamies on my LHS indoor 1/18th scale carpet track. Two totally different driving styles, you have to be very smooth with the slash on...

Those *****'s come with a deans type connector.

Running longer screws with nuts is not a modification, it's just something you need to do in order to keep the running gear performing like it's supposed to.

Some slashes out of the box keep...

Maxx, his esc is on the way out.

With the gears you were running on the vxl at the time, it quitting was probably not due to overheating. You can send that motor back to traxxas and they could possibly replace it due to what they...

The sc10 feels more like a steak knife where the slash is a butter knife. It takes more skill to drive the sc10 the speeds you can drive the slash because it is so responsive. Also, it's no way near...

The new era adapters don't keep the stock width when you switch, you're going to need different adapters to run buggy tires with hitting, FLM's are a good choice, of course with the new era adapters...

Your motor will be fine, I doubt traxxas is gonna warranty that but you've got nothing to lose trying.

A 20C discharge battery is more than enough for the Slash but you're gonna want a 5000 mah for the runtime. Go with the VXL system and stick with stock or slightly higher gearing since it's so hot in...

Put jaco foam tires on the rear so you're not getting added speed from tire expansion to find the true speed of your setup.

I'm buying another slash off a buddy that has the MM with 5700 in it so that one should get me over 60mph. My VXL 3500 is only spinning at 38,850rpm and the 5700 will do 63,270 so that should put me...