well put bubble27
Type: Posts; User: 78910jato
well put bubble27
could also be the clutch spring
on the ERP you can take any motor minus the carb clutch flywheel and ez start and send it to traxxas.
good sites are tower hobbys amain hobbys
well when breaking in the motor i like to do factory settings which is 4 turns out hsn and 1 1/2 on lsn and i like to use long tip screw drivers i got some from my lhs about 3 inches long. and the...
yup there you go the off road jato project ideas will help you out
rpm all the way around mabey a wing sounds like your set
yea for sure the upgraded traxxas shocks and dont use integy!!!!!
well first i would change the batteries in the rear of the car...
to check the electronics all you do is turn on the car and remote move the throtle and the steering... if your servos are...
yeah i went WOT into a pole and only broke a A arm so i upgraded to the RPM arms also put on the huge RPM bummper and just some other upgrades but its a great truck stock
well it revs real high and doesnt shift into second gear so mabey it is shift point ill have to try that
hey i just got my foward only conversion in and it revs really high i was wondering if that was normal....
well i guess you could find a way to mount the wheelie bar to bumber just drill new holes and bolt it up
im asuming you have the flat pack
didnt work you copied the wrong thing
check fuel lines and carb could be gunked up
yeah for sure vids would be great
yeah check all of the wires going to the reveiver and that your reciver and controller are charged
1) yes this is a good starter pack
2)i would purchase a couple of spur gears and glow plugs.
3)For break in and after run i would just read the manuel
4)this is the brake mod you will need a...
^^^^ thats all i had to do too
i have that radio on my jato i love it are you using the servos too?
yeah thats pretty cool but i would worry about runnin lean
Can we get picks and when he instals the 3.3 he needs the blocks inbetween the motor and the mount bc that is for pullstart roto....
well when i start the motor it revs high and it doesnt engage any idea on what it could be
well could the reverse cause the trans not to engage