Search:

Type: Posts; User: Auxbar1

Page 1 of 2 1 2

Search: Search took 0.10 seconds.

  1. Thanks bro!

    Thanks bro!
  2. hey dadx...I went to snug up the caps on my rpm...

    hey dadx...I went to snug up the caps on my rpm knuckles...do u know what sized hex wrench that takes? My 1.5 is too big...I think it's 1.0...is that right?
  3. I think I have a set of aluminum knuckles in my...

    I think I have a set of aluminum knuckles in my future...but might do a gyro just for fun. Anybody know the name of that little black one? Or a link to a good little one? Ive seen that black one...
  4. Alignment seems ok..looks good to my eye..toe in...

    Alignment seems ok..looks good to my eye..toe in @ the rear with a touch of negative camber. Fronts are straight with a tiny bit of negative camber. It goes real straight with half throttle. ..if I...
  5. Tracks straight at low speed...squirrelly at high...

    My merv drives really straight when im driving slow, but when I hit the juice it wants to dart all over the place. GTR shocks, blue summit springs, 70 wt. and minimal preload. RPM knuckles, dirt...
  6. Replies
    11
    Views
    442

    +1 on the Hopper....but it will break. Not very...

    +1 on the Hopper....but it will break. Not very easily, but possible.
  7. Thread: WTB - Vxl 3m

    by Auxbar1
    Replies
    0
    Views
    141

    WTB - Vxl 3m

    Hi all. Im looking for a new or like new vxl 3m for my merv. Let me know if u have one. Thanks!
  8. Here is what I use and reccommend...

    Here is what I use and reccommend
    http://www.dynamiterc.com/Products/Default.aspx?ProdID=DYN2833
  9. Thread: WTB - Vxl 3m

    by Auxbar1
    Replies
    0
    Views
    195

    WTB - Vxl 3m

    Hi all. Im looking for a new, or like new, VXL 3M for my mini revo. Needs to be new...if u have one u want to unload, let me know. Thanks!
  10. Replies
    20
    Views
    444

    I I would have taken out the ramp and pulled a...

    I

    I would have taken out the ramp and pulled a couple of double backflips...then told him if i installed the flux capacitor and got it 88 mph it would go back in time...
  11. Traxxas TQ "Link" not backward compatible with older TQ2.4ghz receivers

    Like the title says, I just found this out the hard way. I'm sure most people probably already know this, but maybe I save one person from beating their head against the wall like I did.

    On...
  12. Well....hard to verbalize...your gonna love this...

    Well....hard to verbalize...your gonna love this description...when i turn it on initially it goes "deedle-dee-dee, deedle-dee-dee, dit-dit-dit-dit"...im counting the "dit"s. Does that make sense? ...
  13. Great...not sure what happened...but now it is...

    Great...not sure what happened...but now it is beeping N-2....I've updated firmware...rolled back firmware....reset factory defaults...the whole 9. Now it thinks there is 2s instead of 4s....and 4s...
  14. Well...tried what you said...no dice. Still...

    Well...tried what you said...no dice. Still beeps N-1...I'm thinking I can run down to 3.4vpc, that's 13.6v. ESC is going to think this is one cell short...so that's 10.2. I guess I can set...
  15. Thats exactly what mine does...correct cell count...

    Thats exactly what mine does...correct cell count minus one. Im gonna try what u said and report back. Thanks bro!
  16. ESC doesn't "see" one cell...voltage detection is skewed

    Anybody else have this problem? My Castle MMM ESC is one cell off in auto-lipo mode. If I plug in 4s...I get 3 beeps. 6s gives 5 beeps....3s gives 2 beeps...and so on. These are brand new fully...
  17. Replies
    0
    Views
    241

    WTB - Traxxas 2.4ghz Transmitter

    Hi all. I'm looking to buy a Traxxas 2.4ghz transmitter. Mine started acting flaky, so I need a new one. Not looking for the brand new one that came out recently, one of the older stye is fine. ...
  18. Replies
    8
    Views
    508

    Ok...so I got it figured out...thanks to...

    Ok...so I got it figured out...thanks to Petertje60. I hooked up esc and servo, to radio of big erevo. No jerkyness. So it was the radio...just for giggles, I bound the mini's transmitter to big...
  19. Replies
    8
    Views
    508

    i tried other port on channel 1...same deal. New...

    i tried other port on channel 1...same deal. New batts in transmitter made no difference. Both sides are jerky...one side a little worse then the other. Guess i can pull radio from big brother...
  20. Replies
    8
    Views
    508

    I did reverse servo and troubled moved to the...

    I did reverse servo and troubled moved to the other side. What does that indicate? Will try new batts. In transmitter. No binding in steering...its silky smooth...went over all that with fine...
  21. Replies
    8
    Views
    508

    Servo acting goofy....is it my ESC?

    Hi all. I had put my mini revo away for awhile. Bought some brand new **** 3s lipos for it...stock motor and stock esc, stock servo. I charged up batts and went for a run. Servo was acting goofy....
  22. Replies
    9
    Views
    572

    1080 Launch ramp. Google it....rocks for the...

    1080 Launch ramp. Google it....rocks for the mini. Kinda small for the full size, but perfect for mini. Back flips and doubles all day long like it was my job.
  23. Replies
    16
    Views
    1,992

    Just to clarify....the switch is a well discussed...

    Just to clarify....the switch is a well discussed failure point, but not necessarily the cause of the issue described in the original post.
  24. Replies
    16
    Views
    1,992

    So maybe i can just set low voltage cutoff...

    So maybe i can just set low voltage cutoff manually? Esc works good other than this problem...if its gonna cost me money to fix it anyway, i might as well wait till she blows...will cost the same to...
  25. Replies
    16
    Views
    1,992

    87 GN- I'm using two 2650's so its 212...

    87 GN- I'm using two 2650's so its 212 amps...they in parallel....and I tried it with my 3s batts and ESC beeps two times.....maybe firmware upgrade will fix? ESC works fine other than that....i...
Results 1 to 25 of 27
Page 1 of 2 1 2