Search:

er ,

im pretty sure its your lower output gear stripping away ...same thing happened to me!

pro-line mashers or HPI Phaltlines

stock tyres blew up:(

I got both


RPM's are bullet proof , Alluminium bends

20/68 is low gearing for the MMM

mine is geared 24/62 on 4s and it is mad....

temps are very cool too

hehe nice:)

http://img405.imageshack.us/img405/1543/dsc00033ca.th.jpg
added a flag:D

yay! up and running again!:)

got my parts today , should be up in an hour:D

hehe thanks:)

ye needed the extended rear mounts!

how the heck u do that!?

just need to put the gearbox back together and shes good to go!


http://img242.imageshack.us/img242/6409/dsc00022q.th.jpg

http://img13.imageshack.us/img13/1048/dsc00021bb.th.jpg

also make sure your gears are mounted correctly....the mesh must be close together but not tooo close , otherwise you will BREAK your gears!.....

they must be loose just enough soo you can fit a...

your gears will be fine , just make sure your slipper clutch is not 100% tightened , make it tight but not immovable....


read your manual about steering setup , make sure A-arms are skrewd in...

er , im using the RPM bulkhead braces?...they seem to be holding my Bulkheads together pretty well?

omg

I confused RPM with FLM!

dammit:D

was thinking since when do RPM make chassis?!

FLM Chassis?

can you show me a link to that?

FLM Shock towers???

where u getting that!!

looks cool man!

you mean aslong as the RIM has a 17mm hex.......


you can put any tyre onto the e-maxx / e-revo!

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXTHR3

I got that one , and the steering is way better than stock and a LOT faster

ok cool thanks man!

erm , ok.......and must i put the horn on strait?

how do i center a servo?

sorry this is my first ever rc car and first time iv ever bought a servo!

ok thank you!

do i need to setup the servo atall? or just play and play? do i need to "allign" it because i have been moving it around a bit!

thanks a lot man! really appreciate your help , but before I order ,

are you SURE that those will work!!?

also , do i need to setup the servo atall? or just plug it in a play?


as a...

thank you brett , how to I fix this issue??:(

i was told on a few forums that this servo would be fine...guess its not!

*cry*!!!

the bulkhead braces are too small! they dont fit onto my emaxx!!:(


Also please can you guys take a look at this picture...........

I installed the servo , but the plastic thing...

http://www.*************.com/forum/showthread.php?t=66514

please guys help me out:(