Search:

Can you have both on your phone? Or does V2 replace V1 as an "update?"


Sent from my iPhone using autocorrect

Very, very nice! I have done the 3 position mod, you aren't kidding lots of small pieces and little room for error. Keep up the good work!


Sent from my iPhone using autocorrect

Yeah I need to learn to read and look at pictures better.

Was that the heatsink that got warm with no load? Basically with just power applied to the power supply it gets warm?


Sent from my...

Lookin good Jimmie! What heat sink did you end up using?


Sent from my iPhone using autocorrect

Yes, keep us posted.


Sent from my iPhone using autocorrect

The spur gear is at max for size without modification.

If you are still running the Titan 775 I wouldn't recomend gearing for more speed, it will lead to premature failure of the stock motor.
...

The chargers that come with are slow, but will get you by. If you decide to get a faster charger save yourself some money and research chargers. If in doubt ask here, there are some very...

+1 well said


Sent from my iPhone using autocorrect

So do you have the newer TQi? I could see where it's position could be a real pain. I have the older TQ and use my pinky.

I could see why you wouldn't want to "take your hands of the wheel" in...

I have a tekin B1R in another RC. I caution you as this little guy is factory set at 6.0V for LVC. (3.0/cell)

I'm not saying yours is but be careful, don't want to go ruining a good set of...

1 (888) 872-9927 Could have somthing to do with the pot and other circuitry inside. I'm not sure though.


Sent from my iPhone using autocorrect

I agree, my ground wire smoked almost instantly. I try to watch for this question so I can prevent someone from doing the same thing.




You'll love it.


Sent from my iPhone using...

In my experience yes, it matters. I had mine wired to the non BEC side in efforts to even out battery usage and fried my esc.

Moved my wires from the non BEC side to the BEC side and presto it's...

Yes take the other servo and linkage out that is not being used, no need for it anymore. Might want to cove the hole with some plastic, TRAXXAS makes a cover plate but supposedly it doesn't fit very...

Whatever servo you chose aim for 300+oz in. I'm running a futaba S9157 as well but I also upgraded to an aluminum horn and servo saver...I did t want any flex.

At times I wish I had more torque...

I'm running a steel hot racing pinion and am happy so far. Go smaller...any bigger with the pinion on the stock 775 and it won't last long.


Sent from my iPhone using autocorrect

Nice work pave. That is a very nice 2x4. I do like the idea of a 2 tier holder as well, all depends on your bench setup/space and personal preference. I'm curious to see if the new tools hold up as...

I couldn't agree more. There would e a lot of time and effort put into them.

I also planned on making a set but why? Just so I could break somthing else that was more expensive or harder to...

Uuuuum with body clips?? :lol: sorry couldn't resist.

I bought body posts for an e revo and layed out my holes. I thought about modifying the summit posts but I may want to run a summit or other...

Are the shocks full? I was always told a properly rebuilt/filled shock rebounds 1/3-1/2 the way back out when compressed pretty quick. Mine generally do after a rebuild or a fluid swap. Maybe try...

It would be tough to fit it on a 1/16 chassis...not saying it can't be done but you might want to find them in person and take a few measurements.


Sent from my iPhone using autocorrect

Looks good! Gonna have to cover the Canyon AT decal now? ;)


Sent from my iPhone using autocorrect

Very nice! Where did the fabric come from?


Sent from my iPhone using autocorrect

A very sweet coupke of videos. Nice camera and editing work there. Thanks for sharing.

Haha I know the feeling...if I only knew then what I know now...



Sent from my iPhone using autocorrect