Search:

Type: Posts; User: garywi

Page 1 of 13 1 2 3 4

Search: Search took 0.01 seconds.

  1. Best Gear Ratio - VXL with 25C 11.1 Volt Lipo

    What pinion is best with the 86 spur, that won't cause the speed control to overheat right away, and still privides good speed and power.

    19
    20
    21
    22
    23
    24

    Thanks
  2. Ok, I bought RPM Stablemaxx wheels 3.2 size. Do...

    Ok, I bought RPM Stablemaxx wheels 3.2 size. Do you know of a lighter buggy type tire that will fit. Would rather not have to cut off the bead on rim or tire to make it work. Thanks!
  3. Need 17mm Hex Wheels that don't rub body - Slash MT - Pic

    Still fighting this Slash MT conversion. Don't want to raise or cut body. Just added Tekno CVDs and 17mm hex adapters. Brought truck down to hobby store, could not find one wheel that would fit,...
  4. Replies
    6
    Views
    607

    Wheels - 17mm Hex Wide Offset

    Hey, if you are using a wide off set wheel with 17mm hex and you did not have to cut or modify the wheel's bead, can you let me know what you used?:)
  5. Replies
    9
    Views
    300

    Ok, I will go with 17mm.. Do you know of a wide...

    Ok, I will go with 17mm.. Do you know of a wide off-set wheel that I don't have to modify, like cutting off the bead, etc..Thanks
  6. Replies
    9
    Views
    300

    Thanks guys. If I just go to 17mm tekno hexes,...

    Thanks guys. If I just go to 17mm tekno hexes, are there wide offset wheels that will clear the body?
  7. Replies
    9
    Views
    300

    I thought those Axial hexes would work cause the...

    I thought those Axial hexes would work cause the Axial trucks use 6mm stubs, but no, these would have to be dilled out. I don't have a drill press to get them right..
  8. Replies
    9
    Views
    300

    Reward for information leading to..

    I still need wheels to finish off my MT conversion. Been sitting on the bench for two months. Need a wide-offset to clear the body. Running 12mm hexes, Tekno CVDs. The RPM crawler wheels don't...
  9. I just found that axial rock crawler kits use 6mm...

    I just found that axial rock crawler kits use 6mm stubs and run 12mm hexes, so I ordered some of there narrow 12mm alum hexes.
  10. RPM Crawler 2.2 Wide Offset - Problems Mounting to Tekno Stubs

    Trying these wheels to solve a body clearance issue and for wider track. Fronts bolt up fine to stock Traxxas stubs. Rear have issues. Using Tekno CVDs and 12mm alum hexes and wheels are fully...
  11. Need Narrow 12mm Alum Hex that Fits 6mm (Tekno) Driveshaft

    I am trying to run RPM Rock Crawling Wheels and can't bolt them up to a Tekno driveshaft, not enough thread left.
  12. Tekno M6 stub axles too short to bolt up wheel

    Converted rear of Slash to Tekno CVDs and go to bolt up wheels, and there are not enough threads to get my wheel bolted on, can only partially bolt on a few turns. Yes, rim is fully seated on hex. ...
  13. Replies
    1
    Views
    441

    RPM Crawler 2.2 Wide Offset? - Pic

    Anyone run the RPM wheels on Slash? I am doing a Slash MT and need wide offset to clear my body, which I don't want to trim. I would rather not buy 17mm adapters and modify a 3.2 rim to fit a...
  14. Replies
    6
    Views
    578

    Has anyone put the Crawler 2.2 wheels with the...

    Has anyone put the Crawler 2.2 wheels with the wide offset on a Slash MT?
  15. Replies
    6
    Views
    578

    Stampede to Slash MT Conversion Pics

    So, am done. All the upgrades. 3S. Of course the wheels rub. I don't want to raise the body. I have Tekno's 6mm axles on back and stock Traxxas axles on front. Would love to get simple wheel...
  16. Replies
    5
    Views
    1,096

    E-Revo as a MT Basher?

    How is the erevo as a monster truck basher? I like the wide and low CG set up of the Revo better than the emaxx. Do people put big Mashers and a standard truck body on these things? :unsure:
  17. Ok, so if I use the Ofna or RPM stablemaxx...

    Ok, so if I use the Ofna or RPM stablemaxx wheels, I will need a hex adapter. I have Tekno in the back (6mm axcel) and stock Traxxas in the front (5mm). What adapters do I need, also, is there an...
  18. Slash MT - Wider Stance with Wheels - Extenders

    I don't want to do the ProTrac mod now as I have non-ProTrac CVDs and don't want to replace them.

    I would like to find Wheels and a small wheel extender instead.

    I am hearing there are only two...
  19. Replies
    4
    Views
    189

    Jeeze, I just did the ProLine ProTrak mod,...

    Jeeze, I just did the ProLine ProTrak mod, replaced all the rod ends.
  20. lipo charger

    lipo charger
  21. Traxxas 3S 5000mah - 22/86 gearing. 5 min run time?

    I just threw in a new battery and I got 5 min run time before low voltage kicked in. Charged it with
    the Traxxas cheap charger. Should I be geared differently for 3S. :confused:
  22. Replies
    4
    Views
    189

    Always adjusting toe and camber - Solution

    Simple bashing. After, I am always have to re-adjust camber, and toe to get the truck to track straight. Is there a solution. I am not bashing very hard...
  23. Hi Torque Water Proof Servo and Servo Saver Options

    My traxxas parts are trashed. What have you upgraded too...:confused:
  24. Thread: 122 degrees OK?

    by garywi
    Replies
    3
    Views
    79

    So, I could try for more speed and gear 23/86 or...

    So, I could try for more speed and gear 23/86 or something..
  25. Thread: 122 degrees OK?

    by garywi
    Replies
    3
    Views
    79

    122 degrees OK?

    Running a VXL, 22/86 and 8-cell NiMH battery, stock wheels. After one battery pack, my temp gun read
    122...
Results 1 to 25 of 322
Page 1 of 13 1 2 3 4