Search:

Type: Posts; User: oneatb

Search: Search took 0.10 seconds.

  1. Replies
    19
    Views
    526

    Pulled trans apart this afternoon & replaced all...

    Pulled trans apart this afternoon & replaced all internal bearings, (on the diff, idler & top shaft.)
    Reassembled trans & put back on truck.
    Have had a short play with one of my 5300Mah 2s hardcase...
  2. Replies
    19
    Views
    526

    Motor is part of the Hobbywing EzRun series...

    Motor is part of the Hobbywing EzRun series combo's available.
    It is 3656 4 pole 3400kV.
    http://www.hobbywing.com/product_show.asp?id=281
  3. Replies
    19
    Views
    526

    I'll check the top shaft for run-out, it was fine...

    I'll check the top shaft for run-out, it was fine in the original Traxxas housing.
    Will also back-off the slipper nut a bit.
    So if 4s is too much, just stick to some good high capacity 2s packs,...
  4. Replies
    801
    Views
    463,227

    Sticky: Here's my Robby Gordon edition Slash out on a day...

    Here's my Robby Gordon edition Slash out on a day trip with my MERV.

    https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/934617_10151565859499082_413804442_n.jpg

    More pics...
  5. Replies
    19
    Views
    526

    Could be slipper overtight. RPM housing with a...

    Could be slipper overtight.
    RPM housing with a HR Sealed Diff & 100K oil.
    Hobbywing SC8 & 3400kv motor.
    Have 2x2200 2s which I started running in series.
    Also use 2x1800 3s in parallel.
    Also...
  6. Replies
    19
    Views
    526

    Pinion & Spur gear trouble.

    Since swapping out the standard plastic gearbox housing for an aftermarket plastic housing with aluminium motor mounting plate, my brother & I have had continued trouble with pinion & spur gears...
Results 1 to 6 of 6