Search:

$350 + $35 shipping Paypal only! Any takers?

Up for sale is a Traxxas T-Maxx 3.3 “3.4” (read below).

$400 + $35 shipping or Make me an offer. I want to sell everything together.

Story: In March of this year I purchased a T-Maxx 2.5 from...

Thanks! I had a manual for my older Tmaxx but never tried to adjust the tranny. The newer 3.3 I have, I purchased all of the parts separate and put it together myself so I never got a manual for it.

Is it possible to adjust the 3.3 transmission shift point? When going to a larger engine with more hp is there any adjustments that should be done to the tranny? Maybe its just me but it seems like...

Thanks. I was surprised there was not any real damage. I wws sure the chassis was bent or something but the rpm center skd took the impact. It was gouged but other than that, no damage at all. That...

Below are some more videos of my tmaxx with the losi 3.4 engine. I put on a wheelie bar. The first video is some high speed runs, the second is some more high speed runs with wheelies and a crash....

This is a link to the stock Tmaxx mount: http://www3.towerhobbies.com/cgi-bin/WTI0001P?I=LXMJE7&P=8

There are also a lot of different aftermarket versions out there.

I used to have a T-maxx that had aluminum bulkheads, FLM in fact. I upgraded the bulkheads, chassis and chassis braces to all FLM aluminum. I put about $1500 into that truck. Then I had to sell it. I...

The front lower stock pins keep breaking! I haven't even been doing any big jumps or anything. I've gone through 2 sets in the past month. They break at the same place and 2 - 3/4" long pieces of the...

I am using the stock bulkheads, I may upgrade to the aluminum ones in the future and I will also get Lundsford Titanium hinge pins but for now the stock plastic works and if they do break are cheap...

The set I received which is for the T-maxx 3.3 came with 4 long pins all the same length, 2 pins that were slightly shorter and 2 pins that were even shorter. I installed one of the longer pins in...

I'd rather the plastic spur gear strip than use metal and have a problem inside the transmission or other places. I have never stripped a stock spur gear in the 3 trucks I've had. Just gotta spend...

Do not buy FLM hinge pins if you are using RPM a arms. They are not long enough. I just learned the hard way.

I looking into buying a new set of tires and wheels. I'm leaning towards Proline 40 series trenchers mounted on Tech 5 wheels....

Did you try to check / change the glow plug?

I was always told the 3 shoe clutch is better

I use the silver Evo 5: http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXANSK&P=V

I had it on a traxxas motor and have now moved it to the Losi...

$85 on ebay with shipping. Came with the exhaust, header & spin start. Had 10 tanks through it, just got through break in.
I've seen other used & new ones on ebay for under $100.

I first saw it on a forum. If you google "tmaxx 3.4" The first 2 youtube video's that come up is the original guy I saw that did this engine swap. Also the forth item down "Losi 3.4 powered T-Maxx -...

Yeah, I figured a new stock set is $10, its $12 for the FLM set. I'll give them a try. The titanium ones are nice, just expensive!

I had the lundsford ones on my old T-maxx. They were great but they did bend. I had aluminum bulkheads at that time & it was a real pain getting the pins out. I just ordered a set of Fast Lane...

I've used the integy 3 shoe clutch for years. Both the older style that has the single spring similar to stock and the newer 3 spring one. Never had any problems.

Any suggestions for a wheelie bar? The stock one looks like it would break off the first time the truck lands on the rear bumper after a jump. The aluminum ones seem like they will bend easily. Will...

Yeah I was looking today for one.

That wing was brand new yesterday morning without any scratches. Now the back of the wing is pretty ground up from wheeling. Deffenetly feel like the truck was more steady at high speeds with the...

http://youtu.be/AeJFvLeRN6g