Search:

Hey Gus, beautiful pics as always. Where was this located? I'm in Anaheim, not too far from where you are.

You can try this:
"Integy Front Sled Attachment Set 1/10 Revo/T-Maxx"

Tekin RX8 2250kv motor, or dual 700HO stock esc. 17/68. 4s (2x 2s) 8000mah 20C lipo. Jumbo Kong tires/rims, proline moabs on axial oversize beadlock, or stock tires/rims.

Yeah they are axial 8-hole oversized beadlock black, they do rub the toe links when turn
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXPEE0&P=ML

I got about 1 and 1/2 hour of crawling with smc 8000mah. If you full throttle during bashing you will only get about 30 minutes of bashing time. The dual motors will drain your batteries really...

Before:
http://img101.imageshack.us/img101/8738/dsc00686yt.jpg

After:

http://img29.imageshack.us/img29/6101/img2458s.jpg
http://img828.imageshack.us/img828/1420/dsc00685rd.jpg...

noir - thanks for posting the pics...thanks noir and jamann for the compliments

http://img685.imageshack.us/img685/4219/img452a.jpgUploaded with ImageShack.us
http://img843.imageshack.us/img843/749/img2458w.jpg Uploaded with ImageShack.us...

Motor: Tekin 2250kv / Kershaw Design Dual 700HO
ESC: Tekin 1/8 Rx8 / EVX-2
E-Revo Aluminum Roll Cage
Wheels/Tires: Axial Oversize Beadlock 8-Hole/Proline Moab
...

you have a pm

Kershawdesigns.com has one for $10.99 plus shipping. look under batteries/chargers section

Name: Summit
Motor: Kershaw Designs Dual 700
ESC: EVX-2
Spur/Pinion: Stock/17
Batts: (2)2s 20C 8000mah
Run time: Around 2 hours
Wheels/Tires: Axial Oversize Beadlock 8-Hole/Proline Moab
Body:...

Check this out, kinda cool.
http://www.youtube.com/watch?v=V15uYhRcYdc

http://traxxas.com/forums/showthread.php?535439-Summit-F.-A.-Q.
Post #4...You only need the 2S LVC since you will only need to connect it to the BEC side...if you balance your batts when you charge...

pm sent please reply

try this post #5
http://monster.traxxas.com/showthread.php?t=537840

I made my LVC smart stop 2S waterproof by putting it into a extra receiver box, and soldered it to a parallel battery wire harness traxxas #3064 for easily connect and remove, and got 2 esc to...

will you part it, i just need a roller for my project

Hi, I use the Novak LVC, I solder the red & black wire from the LVC to traxxas battery connection ( http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXXKM9&P=ML , so i can take it out anytime i wanna...

Let me know how those batteries go, I'm gonna put on dual 700ho KD motors and use high end nimh to stay waterproof...not going for brushless since i have the erbe. anyways i'm not sure which nimh...

thanks for the tips, I just tighten mine slightly tighter than 1/4, runs the same so I'll just leave it at that for now...


that knight rider summit is SICK!!!

How tight did u adjust your slipper clutch? I let mine out about a little over a quarter...maybe 1/2

I have everything stock except for some added led lights...just tighten the slipper clutch, wheelie bar necessary.

yeah i love it...i've seen all the vids many times and they are still entertaining

It is a fun truck...tighten the slipper clutch if u want to do wheelies with stock parts and stock batteries...have fun