Search:

also check that both motor meshes are good. I had the same problem when I first got the emaxx about a year ago.. one motor and one battery was always alot warmer than the other side... One motor was...

is there something broken on the rear end to make it sqwat like that..

no it does not mean forward only... the reverse rotation is for the erevo... if you look at the erevo one motor is faced opposite of the other which means it has to run reverse...

been running it for about 2 months now.. with an 18/52 gear ratio MOD1. not the 0.8M that is stock... took a little work, running with 4600MAH (cant remember the name, too tired) about 30mins of run...

you would have a buyer if you shipped to canada... i would pay shipping obviously..

maybe $150 depending on how many gallons are on that mill....

i see that there is 1 shock missing on the rear corner. is it included

^^^^ the only way to know is to try^^^^

all i did for the same problem was take some heat shrink tube, put it over the antenna, and apply some heat.

say what? are you saying that you bought 2, put them in emaxx, very happy with system. 94 degrees, fast service from china? how many cells are you running? I just need to know that i can run 14 cell...

To all who have the above mentioned combo, is there any place in north america to order these from. All i can find on ebay is all from hong kong/china. Is that where you ordered your stuff from? How...

They have also showed up Letterman just before xmas last year...

pm'd you again last night.

does it come with a lipo charger

i agree with the above post.... but make sure that your trim is set to zero before turning on the ESC....

Does that hobby wing ESC support 14 cell (2X7 cell).. website only states 12 cell...

also add pieces or window screen along with the shogoo for even more durability...

Fluid Film (in a spray can from most hardware stores) around your not waterproof servo and receiver boxes to...

whats the big deal with everyone wanting to do wheelies.. im with twisted on this one... i run a 3905 with a single titan 775 geared 18/52 and it wheelies all the time and i am trying everything in...

i think we can pretty much call this thread done.. It doesnt seem to matter what anyone on here tells rcboy1 or advises him on, he is not listening, choosing to think that the problem is lying...

didnt you already ask this on a post yesterday. http://monster.traxxas.com/showthread.php?t=473946 the difference is one is 12V and the other is 18V. obviously the 18v has more power... do a search...

i would still check the meshing.. the motors could have come loose and moved tighter to the spur gear.. as for the slipper, maybe back it out another 1/4 turn..

one thing to check is that the gear meshing is ok. My brother in law was having the same problem with one battery pack and its coinciding motor was set too tight against the spur... both your motors...

is this the same noise from your other post you were asking about.. the motor grinding?

i have had 6 titan 550's and now a 775 titan.. ive never heard a grinding noise coming from the motor.... what kind of grinding are you hearing... and are you sure that it is the motor and not the...

i think in the manual it tells you how to set the gear mesh correctly.. if you dont have the manual, this is the short and skinny of it... take a thin strip of paper and run it through your pinion...