Search:

Ok guys thanks for the input looks like i will be getting one thoses.

Hi all i am new to the electric rustler and have had mine about 2 months now. And just fitted a VXL-3s and am about to make the move to lipo's. already have a ******* 4000mah 3s on the way. and am...

Try brown integy springs thats what i run with my big bores a long with 60w in the rear

Just glad i could help. we all have those little problems that from time to time that drive us nuts.and i have always found this is the best place to find the answers that you need:)

it sound like a problem i had when i got my jato it was used. it would not turn off it was all ways on. turns out that the guy who sold it me had plugged the charging jack in to channel three on the...

Well I'm using a hitec 5625Mg on mine and these are what i am using and had no problems so far
...

Hi desert the settings i posted are for an ofna .26 carb. that i got from a pdf file that was posted on the t-maxx forum a while back. if you read iracechevys post on this thread you will see he...

I hope this helps:)


STARTING NEEDLE SETTINGS
Master Needle Valve - main control for fuel mixture. Set at 3 to 3 1/2 turns from closed or flush with collar. Adjust this
needle for maximum RPM...

Looks just the stuff i use only mines big bang

http://i267.photobucket.com/albums/ii293/simonchris12/DSC00066.jpg

I think you are wrong there rev check out the pic

http://i267.photobucket.com/albums/ii293/simonchris12/DSC00045.jpg

The hitec 645mg has 133oz of torque. i just checked on the box and the 5645 has 143oz

Try this Link here i picked up a new piston / liner and con rod for just under £40 shipped. for a picco .26 you are looking to pay around £125 more if you want one with the pull start. its cheaper...

I found a new one on ebay £55 or best offer Here:)

Well i cleaned it up put it back together it runs good but when you rev it and then let it idle the revs are a little high for about 2-3 seconds before it returns to its normal idle. and the carb...

redck1979 when i took the old piston out it was also pitted

Hi everyone I'm new to the jato forum. and i pick up a used jato 2.5 off ebay and want to put a 3.3 in. I was given an old one that had lost compression and got a bad oil leak due to a shot front...

A revo pipe should work great i just fitted one to my brothers rulster and he loves it plus it was easy to fit just drill another hole in the chassis and make a hanger to fit...

Yeah mate I'm from the uk and find it hard to find places to bash my trucks. I'm just like desert jato i run solo in a bad area so i have to watch where i run my trucks. Or the local thugs try to...

Hi Curtis got the bulks today looked even better than in the pic's. and am very happy with them. A+++++++++++++ seller top man:D

Here you go:)
http://www.spektrumrc.com/Articles/Article.aspx?ArticleID=1839

OK guys here are some better pic's. and to answer some of your questions the A arms are FLM one's that i got from Scott I'm going to give them a try and see how it goes. and on the monoblock i have...

:cool: Ok you guys got my predator chassis yesterday and only got this far in the build. i still need to put the tranny in but am still waiting on a new tranny case. and need to fit the on/off switch...

just to let you guys know i found a monoblock $60 so far only 5 days out of a 9 day auction left and I'm the only bidder yet just hope i win it will look great on my predator

i was looking for a thunder chassis when i spotted the predator.it was a good job that i did because if i had brought the thunder then spotted the predator i would be kicking my self right now:lol:

yeah i know but when i did not want one i saw like three in the space of a week