Search:

Type: Posts; User: Michael1107

Page 1 of 9 1 2 3 4

Search: Search took 0.45 seconds.

  1. Replies
    20
    Views
    1,433

    Fronts and rears..... Like posted above,...

    Fronts and rears.....

    Like posted above, you'll need to slip a piece of fuel tubing under the piston to take out a little bit of down travel, but it's not much. I'm using yellow springs front and...
  2. Replies
    20
    Views
    1,433

    I've tried the LX1 shocks on both my 2WD and 4x4...

    I've tried the LX1 shocks on both my 2WD and 4x4 Slash. The difference is the LX1's are 13mm, vs. the LX2's at 16mm. They made a big improvement in handling.

    For the LX1's, the stock yellow...
  3. Replies
    24
    Views
    897

    I was having a similar issue with my rather...

    I was having a similar issue with my rather heavily modded T-Maxx. I had to chase the tune between so rich it wouldn't shift into 2nd, then having the temps go through the roof if I leaned it out to...
  4. Replies
    6
    Views
    256

    I'm not sure if it will have the same effect on...

    I'm not sure if it will have the same effect on the 3.3, but I'm running the TM523 pipe on my 2.5R, and it REALLY woke up that motor....awesome top end without sacrificing much on the bottom.

    The...
  5. I did some quick searches, but didn't find...

    I did some quick searches, but didn't find it...can you post some details on the MGT brake mod? Maybe a link to a thread on this forum?

    Very nice truck by the way.

    Thanks...
  6. Replies
    8
    Views
    229

    You may want to reconsider using extra offset in...

    You may want to reconsider using extra offset in the wheels. It will affect the scrub radius, and can have a negative effect on handling.

    Google "scrub radius" and read up on it before deciding...
  7. Replies
    50
    Views
    1,894

    Hey Nitronaught, would you mind PM'ing some links...

    Hey Nitronaught, would you mind PM'ing some links to the parts you use? I've got the short chassis 2.5R, with the black tranny, and I'm trying to figure out what's best for my centers.

    I've...
  8. Replies
    21
    Views
    1,844

    PM sent....thanks.

    PM sent....thanks.
  9. Replies
    11
    Views
    337

    If your engine is tuned really rich, it won't rev...

    If your engine is tuned really rich, it won't rev up enough to get the tranny to shift. Try leaning the HSN out one hour at a time and see if you notice any performance gains, or if it shifts into...
  10. Replies
    10
    Views
    350

    That's the Revo-spec slipper....very strong...

    That's the Revo-spec slipper....very strong design. If one of the pads is MIA, it was probably defective from the start, and just came apart. Definitely call Traxxas....they'll likely send you a...
  11. Replies
    13
    Views
    645

    If you would like to get a good engine, you can't...

    If you would like to get a good engine, you can't go wrong with an OS. The .21TM is the replacement for the .18TM, which is a great engine for the T-Maxx....
  12. Replies
    6
    Views
    354

    OK, so how about a brand new bearing that still...

    OK, so how about a brand new bearing that still leaves a stripe across the chassis? I was seeing this on my 2.5R that has just a tick over a gallon on it, so I figured I'd go ahead and replace the...
  13. Replies
    10
    Views
    350

    http://www.traxxas.com/PDF-Library/4908_manual.pdf...

    http://www.traxxas.com/PDF-Library/4908_manual.pdf

    Page 24 details how to adjust the slipper.....you DID read the manual before going out and running your truck the first time, right??? :p
  14. Well, if you're trying to get the rod off the...

    Well, if you're trying to get the rod off the crank before pulling the sleeve, that's your problem. The sleeve is what hold the piston and rod centered in the bore. You can't slide the piston over...
  15. Black, red, blue, whatever....what I really want...

    Black, red, blue, whatever....what I really want to know is how you're supposed to keep the bladder from tearing when installing the aluminum caps???:confused:

    I've tired oiling everything under...
  16. Thread: Wing mount

    by Michael1107
    Replies
    2
    Views
    166

    Ebay...search for "T-Maxx wing mount". I got mine...

    Ebay...search for "T-Maxx wing mount". I got mine from Billytrucks123. The one that he's selling is a copy of the Diemaker Dave wing mount. It bolts right up to the UE shocktowers. You'll need the...
  17. Replies
    7
    Views
    306

    Thanks a bunch for the information....very...

    Thanks a bunch for the information....very helpful! I'm pretty OCD about keeping the diffs in my O'Donnell Truggy shimmed properly, so I can definitely understand the importance of making sure the...
  18. Replies
    7
    Views
    306

    Is this in the right thread???:unsure:

    Is this in the right thread???:unsure:
  19. Thread: glow plug

    by Michael1107
    Replies
    4
    Views
    236

    I've used those plugs, but I've mainly stuck with...

    I've used those plugs, but I've mainly stuck with OS LC3, and McCoy MC59. They just seem to last a bit longer for me. This was running on 20%, and after I switched to 30%.

    3232X is a good plug...
  20. Replies
    7
    Views
    306

    A quick diff question

    I know there are tons of threads on the diff mods out there (the search button is always my friend), but I'm at work at the moment, so I don't have time to read through everything...

    I've got a...
  21. Replies
    15
    Views
    351

    I'm running the OFNA LX-1 shocks on my T-Maxx,...

    I'm running the OFNA LX-1 shocks on my T-Maxx, and wound up getting some RC8T springs. They fit the socks perfect, and were stiffer than the OFNA buggy springs.
  22. Replies
    14
    Views
    451

    Hopefully not sounding like a know-it-all, but I...

    Hopefully not sounding like a know-it-all, but I agree. :unsure:

    The only bog I had from idle was during the punch test. When I was out on the track, it was very crisp, and I could carry the...
  23. Replies
    12
    Views
    1,091

    First, put everything back to factory settings....

    First, put everything back to factory settings.
    HSN - 4 turns out from closed.
    LSN - Flush with end of slide
    Idle gap - 0.7 - 1.0mm

    Try to get it started at those settings. If it doesn't fire,...
  24. Replies
    14
    Views
    451

    Yeah, I think that I could squeeze a little more...

    Yeah, I think that I could squeeze a little more out of it, but I'm not at a pro-level racing pace anyway. I'm just out having fun, and I could have run an entire gallon of fuel through the motor in...
  25. Replies
    14
    Views
    451

    Well, weather and my work schedule has conspired...

    Well, weather and my work schedule has conspired to keep me off the track since my last post, but I was able to get out yesterday and today for a few hours and put in some laps, so I thought I'd give...
Results 1 to 25 of 219
Page 1 of 9 1 2 3 4