Search:

Type: Posts; User: stevenhousden

Page 1 of 9 1 2 3 4

Search: Search took 0.22 seconds.

  1. Replies
    16
    Views
    255

    I got the losi blue 2.5" for the rear shocks and...

    I got the losi blue 2.5" for the rear shocks and it still feels like I need the large preload spacer in there for it to fit right...is that normal? I am about to order the front losi green...
  2. they are both brand new...the shaft and the gear....

    they are both brand new...the shaft and the gear. I was just going to get the shaft but for 5 bucks at my LHS I got both. I did find an old thread that says its a spring pin and thats why its hollow...
  3. Best way to install gear to shaft?

    I busted the pin on the 3793 shaft slipper clutch that holds the 3195 drive gear. I picked up a new set yesterday at my LHS. I knew it would take some beating to get that gear onto the shaft but...
  4. Replies
    8
    Views
    158

    I replaced both rustys with the RPM rear bumper...

    I replaced both rustys with the RPM rear bumper and like everyone said, it fixed the issue...I had to laugh though when I seen your pic after reading the headline...Our yard used to be riddled with...
  5. Thread: New here

    by stevenhousden
    Replies
    9
    Views
    135

    Welcome back! .....+1 on the aluminum shock caps...

    Welcome back! .....+1 on the aluminum shock caps and castor blocks..the first thing to break on ours was the rear shock tower..it cracked at the base. RPM replacement has stood the test of time...
  6. Replies
    7
    Views
    137

    When we ran ours brushed we really didnt need one...

    When we ran ours brushed we really didnt need one but like AZ said its good to protect the motor...although I don't really recommend the traxxas wheelie bar unless you get the RPM mount. The traxxas...
  7. Replies
    19
    Views
    248

    We purchased the EZ Peak Plus when I got our...

    We purchased the EZ Peak Plus when I got our first set of lipos from SPC. Im with Dad on that one as well. I did a lot of research on the chargers before we got it. It cost more but we have had it a...
  8. Replies
    19
    Views
    248

    +1 on all the favors of SPC lipos....those things...

    +1 on all the favors of SPC lipos....those things rock for the price and fast shipping. We have 4 of the 2s lipos and love them.
  9. Replies
    9
    Views
    172

    The part number you are looking for is TRA5116...

    The part number you are looking for is TRA5116 Traxxas Ball Bearings 5x11x4mm...there is a lot of "other" 4mm bearings out there but I got these for our rustlers..and they have lasted...I cant vouch...
  10. Replies
    11
    Views
    155

    hhmm never thought about that..I use auto...

    hhmm never thought about that..I use auto fiberglass body repair tape and shoe goo around the holes on the inside of the bodies to strengthen them up a bit and it works great. Ive already ordered the...
  11. No...my son and I bash ours..no speeds runs..i'll...

    No...my son and I bash ours..no speeds runs..i'll let someone with some experience in that area field that question. Sorry about that.
  12. I just had it happen last week with one of our...

    I just had it happen last week with one of our rustlers that was running MIP driveshafts. The steel hexes stripped out one of my wheels and it just sat there. I got it home and honesty took me a...
  13. Replies
    11
    Views
    155

    Thats what I was thinking and what I have...

    Thats what I was thinking and what I have read...the tie bar just makes the stock bulkhead stronger. I havent had any issues with our stock bulkheads with the tie bars but I really need better hinge...
  14. First question....no...your spur will not...

    First question....no...your spur will not spin...hold one side and then spin the other axle...your spur will start to turn. Second question...Yes...A stripped hex will make the truck not move,...
  15. Replies
    11
    Views
    155

    Awesome thank you guys...I want to stick with the...

    Awesome thank you guys...I want to stick with the plastic bulkhead until I break it, at least. Which I know is coming in due time but need those pins pretty bad right now. I'll'' get them ordered....
  16. Replies
    11
    Views
    155

    STRC Hinge Pin Quick Question

    Do the STRC hinge pins fit on the stock rustler bulkhead with the traxxas tie bar installed? Or do I need to just replace the bulkhead with the aluminum one and get rid of the tie bar to use the...
  17. Replies
    16
    Views
    255

    cool,,,thanks man. I had those saved in my...

    cool,,,thanks man. I had those saved in my wishlist on amazon already. Next order of tires I will try them out for sure. Right at the same price too. Do you run 2.8 or 2.2s?
  18. Replies
    16
    Views
    255

    I have that setup on my other rusty and the temps...

    I have that setup on my other rusty and the temps stay good running a 2s, 23/83, an esc fan and a motor heat sink. With the talons the temps got higher but not in the danger zone. I just like the way...
  19. Replies
    16
    Views
    255

    Alright guys..thanks for the tips, Much...

    Alright guys..thanks for the tips, Much appreciated. After I get the badlands on tonight and get those huge talons off there I'm going to change out the shock oils to the 40-45 and blue/green...
  20. Replies
    16
    Views
    255

    The rusty with the talons on the back handles...

    The rusty with the talons on the back handles like crap all together...I have badlands coming in tomorrow, boiling the tires off as I write this. Hopefully that helps some. I think a better shock oil...
  21. Replies
    16
    Views
    255

    Sounds good guys...What about your Piston head...

    Sounds good guys...What about your Piston head set up? 2 hole, 3 hole, different front and back?
  22. Replies
    16
    Views
    255

    Bashing Shock Setup?

    So I have been reading about shock oils and pistons.. Both of our rustys are set up equally, Stock shocks, stock oils in the shocks with 2 hole pistons, front and back, shocks mounted in the middle...
  23. Replies
    8
    Views
    169

    We run SPC 2s 50c 5000mah lipos in both rustys...

    We run SPC 2s 50c 5000mah lipos in both rustys with 23/83 gearing for all around bashing , road, ball diamonds etc. I clocked both cars in the 30 mph range with that gearing and lipo. Temps stay good...
  24. Yeah I just said to heck with it.. I deliver mail...

    Yeah I just said to heck with it.. I deliver mail and my LHS is on my route..today he was open and I just picked up the 6852x shafts, a new planetary gear and some wheel hubs...Ill just rebuild the...
  25. Yeah I have been looking for just the output...

    Yeah I have been looking for just the output yokes..hard time finding the ones I need though. I think its this one...
Results 1 to 25 of 206
Page 1 of 9 1 2 3 4