Search:

I had the same problem with glitching when the truck was coming toward me or far away. I lengthened the antenna tube about 2 inches so that I could pull out the slack of the antenna wire that was...

That's a good idea. It might not shift as good though. With the tabs cut, the drum has 4 chances to engage. With the spokes cut, it only has 1. Would probably be a little stronger though. The 2 wide...

I have been running it like this for months with no problems. Been running a 25turn motor on 3 cell and my truck weighs about 8 lbs. It still shifts just as smooth as before the mod too. I don't know...

Mine does the same thing. When I'm driving towards myself and when the left side of the truck is facing me(when the motor is between me and the antenna). I have a single Dewalt 14.4 and the old EVX...

This is how it should look assembled correctly. Notice the size difference in the tabs on the low gear side versus the high gear side.
...

Here's a mod to remove most of the slop in the Summit trans.

Those of you that use them in your SCX-10's and other crawlers know that the worst thing about the trans is when you transition from...

If you want your Summit to crawl better and have more throttle control, change the throttle trigger switch on your transmitter to be 70/30 instead of 50/50 and then recalibrate the ESC. I did this to...