Spend it. :)
Type: Posts; User: mjosparky
Spend it. :)
Gorilla Tape vs. Duck Tape? Is Gorilla® tape really stronger than duct tape?
Gorilla tape and Duck tape are both duct tape. They are made basically the same way. There are different qualities of...
You would have been better off buying a single Titan 775 motor.
I hope they are better than the last MT setup they had.
I have noticed that all the turn buckle ends have numbers or a number of dots on them. Does anyone know what they mean? 2 of them will be exactly the same and have different markings. :confused:
These for tires:
On these wheels:
Army, Actually they are just a bit smaller. On the stock shocks the body is 13.2 mm in diameter and 19 mm with the spring in place. The BB shock body is 12.4 mm in diameter and 17.2 with the spring....
You make the shock stiffer by the type of fluid you run, the type of piston you have in them and the spring you use.
Go with the big bores and put a blue set of these on.
If you can't land it, it is just another wreck..
This is about the best all around tire you are going to find for a varity of surfaces. I have a set on the same wheels and they work great. Any reason you are after the Badlands?
I think you guys should take Army's advice and google "ripple current". There is more going on in the ESC and a brushless motor than I think you understand. But that’s just my opinion, it’s your...
Both of thses tires have held up great for me. I run a MMM with 2200KV and 42.
HPI Goliath Tires
On HPI Blast Wheels...
I reach through the hole and grab the roll bar to pick it up. Screen would not allow me to do this.
People often cut holes in their MT bodies to increase airflow over the ESC, batteries and motor. This leaves an unfinished look to the body. I have found a way to cover the raw edge. Take a piece of...
Does your charger look like this?
If so they sometimes give a false peeks to one battery. You just push the red button...
He told me the moon was made of blue cheese. I went down the block and they sold me ham.
This is what I got from a 3905 running a single Titian 775 with 68/20 gearing. Also using 7” tires.
I bought one of these and they work great. It has all the sizes you will need.
And they fit one of these.
The motor shafts/pinion gears do not face the ESC on a 3905.
What does it attach to?
Has anyone found a roll cage/roll bar that will fit the FLM chassis without major re-work?
You’ve got the controller, don’t stand behind it. :p
I am running *******s, 5200, 30C with a MMM 2200 KV and they work great.