No it was traxxas lipo
Type: Posts; User: ITh4n4tosI
No it was traxxas lipo
Light would just turn solid green when i hit throttle and then go away when i let off, also make almost like a beep sound
The esc felt warm but it was definately cooler then the motor, and both batteries were fully charged when i started and i only got to run it probably 10 or 12 minute on the 2s before it started...
Running my stampede today on my 2s for a little while and every time it flipped over it wouldn't move forward or backward again. I have to wait a minute but the tires still turned. I touched the...
Alright I can try that and no its just 30wt oil
yeah same size as the original ones told ya its just an odd problem wasn't sure if anyone else had this problem ever...
The e-clips come off the shaft so the shaft separates from the shock body. As in the shaft is no longer attached to the piston causing the shock to be in two pieces. The body attached to the top...
Before everyone tells me to just buy big bore shocks or something, this isn't my only hobby and is not my main hobby so if i can save 50$ on it I can. Stock shocks on p4de bent the shock shafts no...
If this is all the parts then its hardly a stampede it looks more like you just built a rally.
alright thank you I figured so I never actually took the clutch out to try it by hand I just wanted to check to see which one it was first.
This is a quick question is the vxl motor suppose to be able to spin by hand. Because I think I use to then for a while it would only spin by a battery connected and now it can be spun by hand again
Its possible some air got introduced into the shock on them try bleeding them a little bit. I know the seal is suppose to stop the air but ya never know its possible
running lipos you should have put the aluminum bearing adapter on it already but not bad how did you wire up your integry fan did you get the split pigtail or put it in your receiver?
What makes this a stampede at all it just looks like your making a rally car out of rally parts??
at the bottom where the spring sits on the flat plastic piece, that pushes up onto the shock shaft so you can take it off then the spring just slides off
is that just a rally chassis or is it like a lcg stampede chassis?
I'm also really curious I think your in for a lot of work and kustom parts.
not always my rear cv axle lasted one run on 3s. One broke and one is visibly twisted on the yoke and on the splines
the foam piece was in there but oh well it happens
but how did he do it?? did he just put one in place of the motor or get a single motor transmission
yeah its the 3906. Any ideas or just have him buy a new rc car??
alright I was gonna tape it anyway I just wanted to make sure thank you
check your manual it tells you what the light sequences and noises make
how do you tell what number it is?? What is the BL 3908
I had have the stock shocks on my stampede. A cheaper option instead of big bores is just get the upgraded shocks shafts for them. I bent one shaft put the better shafts in the shock bodies and no...