Search:

Why not block Associated/Reedy ? They sell products with "traxxas compatable battery connections"

I keep pretty good records on my batteries and I had a HK battery fail on me.I have only had it for 13 months and 219 charge/discharge cycles. I have 23 HK batteries in different sizes/capacities so...

Same problem I had. Too much locktite

I use the STRC pins because I was bending stockers also.I am running the wide mod and I ordered two sets of rear inner and outer pins from Impactrc for around the same price as a regular set.I have...

If you cant find one local I live in Escondido and I have a spare you can have

I used a 5X10 bearing with a couple washers.The 5X10 bearing goes inside the 10X15 bearing so you have two bearings on one shaft

I have a PE with pede tires.I bent axles with stock tires easily.I switched the plastic hexs out for aluminum when I went to pede tires and I did not bend axles quite so easily.When I bent the last...

I think Dad summed it up very well.I started out yeears ago with Ni Cads and I saw blowups with them.I have seen blowups with NiMH batteries.I have not seen,I have heard 2nd or 3rd hand about LiPos...

the little pulley thing is a spacer when using the wheelie bar.You use the long bolt with a nut and the spacer in between

I finally bent a rear using pede tires.I am also using aluminum hexs and Losi springs.When I bent this one it bent at the outer end ,not at the pin hole like when I was running all stock.Also it was...

Maybe you could find BF Goodrich instead? Goodwrench is the GM slogan

I am not using the washers.Mine had a bind when I put one washer in

I have that one in black.The only negative is a lack of adjustability.Two positions ,low and lower

I had this same conversation a year ago including emailing STRC and getting the same answer.Like you I am running TRaxxas aluminum with no very little slop now.i bent the STRC rear tower almost...

10 I think

RPM now has red a arms.Will be available 3/29

All the soft case batteries from ********* require at least dremeling a slot for the wires

Traxxas 4945,The only thing you will use is the black spring which is stiffer than the silver spring

I dont like them.You have to use RPM's hex adapter.This is the only RPM product I did not like

I have bent axles when stock on the Rusty but then I switched to Pede tires and I put on aluminum hexs.I have not bent an axle since then. Is it the aluminum hexs providing more support?Same...

I was refering to the whole assembly shifting front to back because the center drive shaft will allow movement.The original plastic bushing has a flange to keep the shaft from moving back and forth

I cannot run the shock mounts with the GPM shocks.The shock body binds against the chassis.I have the same problem with the Driven Products chassis brace,the shocks rub against thr brace.

I used a flanged bearing because I was worried about it moving.

Why not use a 5X10 flanged bearing to replace the plastic bushing with a small spacer between the two bearings?I dug one out of my spares box and it looks great.Also if the 10X15 bearing goes out you...

You used the wrong one.You are trying to use the one for the Bandit