Search:

Why get a derlin top gear? I've only broke my plastic idler and ut an al one right away. if your thinking of metal to metal, it really doesn't matter in this case

you need to put in a little more info. Like what esc your running and how much your willing to spend. I like my d5's for brushed and lehner 5300 for bl.

we should put a little score board up saying if either bb or pmr is beating who's prices and by what
ex.
PMR BB
0 +1

i just take apart the section and leave the screws with the pieces to put it back together. you don't need a manual if you have a good memory.

first off, i believe the titians will not run too fast because they like to run on 14.4 volts not 7.2. For other motors check out trinity speed gem2 motors they are very good mmotors

the thing i dom't like about 6061 al if that it bends somewhat easily and it doesn't flex. just bend.

i like boiling better thaqn nail polish remover. Although my tires ballon off before i ever want to take them off anyway

there is a member on the boards that makes an al chassis, i am not sure about arms tho. If yur into lexan coldfusionracing is coming out with a pede line of parts

you mean a cnc machine?

i just got my friend's lrp ipc pro sport esc. when i tired to set it up according to the manual online from AE. It doesn't seem to work. The manual says that a led will blink orange, but it only...

i figured out what i needed. I need 3.5 male gold connectors since my setup didn't come with it. The black tab is the bec bridge.

i prefer to call them soccer mom tanks

i just got my lehner 5300 and 9918 setup in the mail from maximizer today and i had a few questions. How am i suppposed to attach the esc to the motor? the esc has motor leads, but the motor just has...

yea you would gain preformence, the battery bars have lower resistance than the thin metal strips on stick packs. Side by side packs can also lower your cg depending on the mounting and such

i'd get it, plus the fact that not many people go below 13t motors in oede due to gearing issues

What brand pinions do you guys use. I got the pack or rrp pinions, they are mabye 2 mm shorter than the stock one. also would an aluminum pinion eat up my spur faster than a plastic one right?

a cheaper way to go, would be to go through coldfusionracing.com. They make strong lexan stuff. They coming out with a pede chassis, arms, and towers real soon

http://www.balakracing.com/soldering.htm
that guide should help you out alot. It did for me

whenever i get Ca glue on my hard i wait for it to dry then i sand it off with sandpaper. It works well

thanks you saved my brother a beating hehe. Although i was looking for a excuse

a 50$ 19-t motor would not be my first choice of motor

I just got my new 7 cell packs from ballistic today, right before i was about to start taking off the stock connectors and putting deans on, my brother started playing with them. He touched the bats...

i bought a 5300 and 9918 controller, it should be here in a few days

i use a combo of a long piece of curved plywood(left it out in rain for a month with a few weights on it *it rained everyday for about a month here in NJ in spring* ) i also use an old red wagon and...

I agree with Stampeedee my stock tube has yet to crack or bend