Search:

Try FlipFlop sandle soles. Some of the cheaper ones are close to the high density foam.

That's far enough for me!

I think that most of the differences are just servo reversing. That's easy enough to reverse a servo.

Stainless screws are more brittle.

I had a stutter like that once using tq radio in my street. It was always at the same place in the street so I thought maybe there was something buried that was causing the interfierence. When ...

What you set is the subtrim. Then set the trim knob to 0.

There are all kinds of people that still use them. Some people are intimidated by 2.4ghz technology.

Is it in this Slash 4x4 manual page 28-30?

http://www.traxxas.com/PDF-Library/6808_manual.pdf

20 but only control 1 car at a time. You won't control 2 cars at a time.

Just bind them once and whichever is turned on first is controlled by the transmitter.

Is the receiver wire in good shape?

It's gotta be the original metal tipped style.

you can reset the throttle by pressing the on button until it blinks red. then press full throttle. then 2 blinks full reverse. then back to nuetral and it's set.

Well after looking inside the radio I decided that a possibility would be to use a BEC also known as a Voltage Regulator with a 2s Lipo. I was thinking it through and the drawback I saw was that the...

Well the nimh's are an option but don't hold a charge like Lipo's do. I do like the LiFe option. Hmmm...

turn on transmitter. Press button on esc and hold until it turns red. One blink, squeeze full throttle. Then 2 blinks, full brake. Then back to nuetral and it should be set.

reset the esc. trim may be moved up a little. Recenter trim and reset esc.

Check the slipper or spur gear.

Is there a substitute for 4aa batteries in the Link transmitter?
I'd like a lipo option but don't know if 8 volts would fry the transmitter. Anyone tried a lipo or know of one that fits?

Sometimes a fried steering servo will stop the VXL from arming and shut off.

Sold...............

I am thinning the part stock now that I'm not running my revo as much at the track. Shipping is the same for one part or all parts. I use Priority flat rate box and tracking. Some parts also fit the...

Here's a link to the ones I use.
They are currently out of stock.

While you are at it you can put stiffer foams in them also. I put stock buggy foams in a set and they worked pretty good. I taped over the holes in the rims and punched holes in the tire. That lets...

absolutely