Search:

Type: Posts; User: RC Fanatic

Search: Search took 0.04 seconds.

  1. Replies
    9
    Views
    672

    I am considering the swaybars as well. Any idea...

    I am considering the swaybars as well. Any idea if by adding the swaybars I could go lighter on the springs? I am currently running green out back with the preload dialed down half way.
  2. Replies
    22
    Views
    2,898

    Of course! You can use any servo with the traxxas...

    Of course! You can use any servo with the traxxas 2.4 - Hitec is a good quality servo and you will definitely notice the performance gains!
  3. Replies
    5
    Views
    1,685

    I am running 60wt in the rear with the green...

    I am running 60wt in the rear with the green (3.5lb) springs and with preload set to ensure driveshfts are above level. (Preload collar has to be set about half way down the shock, too much in my...
  4. Replies
    22
    Views
    2,898

    Sorry I forgot to answer your question regarding...

    Sorry I forgot to answer your question regarding the receiver. I have 6 cars in all and use the Spektrum DX3R Radio and mainly the Spektrum 3500 mini receivers! They are excellent!!
  5. Replies
    22
    Views
    2,898

    Here's the latest on my setup that really works...

    Here's the latest on my setup that really works on the rear of the PROx4. 60wt oil in both GTR shocks with the 1.1mm variable rate (4 hole)pistons. The thin piston hole cover is mounted on the top...
  6. Replies
    22
    Views
    2,898

    I just installed a Hi-Tec Titanium gear servo on...

    I just installed a Hi-Tec Titanium gear servo on the steering of my PRO4x4 and it works great. With 333oz/in of torque i wont have any breakage issues. What rear springs are you running on the rear...
  7. It's very hard to tell if the OWB is having...

    It's very hard to tell if the OWB is having problems by a visual inspection. I know because i converted to a box start and all my idling problems went away. I had previously been thru many OWB that...
  8. Replies
    6
    Views
    754

    Anyone out there have a chance to dial the new...

    Anyone out there have a chance to dial the new Slayer PRO 4x4 on the track? If so, what setups are you using? Do the previous setups from Steve Slayden work well with the new Slayer?

    I have just...
  9. Replies
    5
    Views
    1,685

    Where did you race in AZ? I used to live there...

    Where did you race in AZ? I used to live there and my inlaws still do. Last time I was there I checked out the Awesome "Nitro Pit" track in Surprise, AZ. If you get a chance you should check it out!...
  10. Replies
    47
    Views
    3,479

    Great bit of info to do the conversion...I have...

    Great bit of info to do the conversion...I have done this and everything came out very sweet. Now I'm looking for some good track setups...anyone have them???
  11. Replies
    132
    Views
    80,728

    Sticky: 1st Generation Slayer to PRO 4x4

    Not sure if this 1st picture post will work. Here is a picture of my newly built conversion from old Slayer to PRO 4x4 with everything bought off eBay!
    ...
  12. Have you checked your "One Way Bearing/Easy start...

    Have you checked your "One Way Bearing/Easy start bearing"?

    Below, "coffee" said he had problems with his bearing locking up on him. I also had this same frustrating problem. Finally, I got sick...
  13. Replies
    5
    Views
    1,685

    SLAYER PRO 4X4 Race Setups

    Anyone out there racing the new PRO 4x4 yet? Does anyone have chassis setups that are working well for them? I am interested in getting this thing on the track to compete with Slash 4x4's...
Results 1 to 13 of 13