Search:

Type: Posts; User: motor1976

Page 1 of 3 1 2 3

Search: Search took 0.04 seconds.

  1. is there a way to save that setting?

    is there a way to save that setting?
  2. are you going to be running 2s or 3s? i was...

    are you going to be running 2s or 3s? i was thinking of that motor also but only wanna go with 2s and didnt know how that motor was on 2s.
  3. im not sure about the stock esc with that motor....

    im not sure about the stock esc with that motor. it would be nice if you knew someone with a card you could use but like i said you have to use the computer to get too the live link. let us know if...
  4. it may have something to do with the recievers...

    it may have something to do with the recievers but once you turn off the live link you can use any reciever. and like i said the field card is a great tuning aid to adjust punch throttle and brake...
  5. sounds like the problem i had you should get the...

    sounds like the problem i had you should get the programing cable anyways as it makes the esc very tunable and you can turn off the live link which is basically for the drag racing stuff anyways. i...
  6. do you have the cable for the laptop if si hook...

    do you have the cable for the laptop if si hook it up i think the last tab has a box next to cll uncheck the box and save. i had to do this to get mine to work with my non tqi it would just beep also
  7. did you turn off the live link if not try that...

    did you turn off the live link if not try that and see if it works. it only takes a few minutes
  8. If your other reciever isnt a tqi use castle...

    If your other reciever isnt a tqi use castle software to turn off the cll (castle live link). thats what i did to get it to work with my 2.4 tq reciever
  9. Thread: esc problem

    by motor1976
    Replies
    13
    Views
    395

    I use a castle esc. on the traxxas i dont think...

    I use a castle esc. on the traxxas i dont think you can change it
  10. Replies
    6
    Views
    457

    its cool the ets3 is a rebranded castle mmp that...

    its cool the ets3 is a rebranded castle mmp that only handles up to 3s. the esc was only $50 on an ebay chop shop. this combo has alot of low end and when i gear down its gonna be insane. i figured...
  11. Thread: esc problem

    by motor1976
    Replies
    13
    Views
    395

    You may be hitting the low voltage. On my esc i...

    You may be hitting the low voltage. On my esc i have the volage cutoff at 3.6 volts per cell. It was 3.4v from castle but i wanted to be on the safe side
  12. Replies
    6
    Views
    457

    i am using the esc from a traxxas drag car an...

    i am using the esc from a traxxas drag car an et3s. it is a castle esc made for traxxas. right now i am only using a 2s 5300 lipo. after some high speed runs in the alley it was still cool but gets a...
  13. Replies
    6
    Views
    457

    Castle 3800 and et3s awesome combo

    Finally got a chance to play with my 4x4 in the back yard adn side alley and this combo rips. Running 18/54 gearing but probably gonna switch to 16/54. heat wasnt bad but just wanna be safe although...
  14. I live in PA south of erie

    I live in PA south of erie
  15. Replies
    7
    Views
    406

    I am running 2s 5300mah lipos

    I am running 2s 5300mah lipos
  16. Replies
    7
    Views
    406

    i am running a regular tq link after i shut off...

    i am running a regular tq link after i shut off the live link. i changed the bullets on the motor to match the esc.
  17. Replies
    7
    Views
    406

    This is my temporary hold down for the esc made...

    This is my temporary hold down for the esc made from an old esc case lol http://i1072.photobucket.com/albums/w374/motor1976/Mobile%20Uploads/mms_picture_zpsa43dce92.jpg
  18. Replies
    7
    Views
    406

    I got it put in and luckily i got the link cable...

    I got it put in and luckily i got the link cable because i couldnt calibrate it until i tuned off castle live link. Tried a quick test in the house since its dark out and wow this thing is gonna be...
  19. Replies
    7
    Views
    406

    et 3s question

    I recently got a cc 3800 sidewinder on trade and need an esc. I see the et 3s on ebay for around 60 and was wondering if this would be a good combo? what would be a good gearing for all around...
  20. Replies
    0
    Views
    95

    esc and gearing question

    I recently got a cc 3800 motor on trade and was looking for recomendations on a inexpensive esc and what gearing i should use. I will be doing light bashing and racing on a small track and...
  21. Replies
    240
    Views
    7,921

    i live near erie and cornhuskers speedway is a...

    i live near erie and cornhuskers speedway is a fun place.
  22. i switched gears from slayer to revo no problems

    i switched gears from slayer to revo no problems
  23. Replies
    8
    Views
    250

    whole track length

    whole track length
  24. Replies
    8
    Views
    250

    losi eclipse that came on it

    losi eclipse that came on it
  25. Replies
    8
    Views
    250

    ok thanks. its a big track with banked straights...

    ok thanks. its a big track with banked straights and high banked turns very fast. just cant seem to not spin the tires when i get back on it due to the torque and loose top. plus i need more speed...
Results 1 to 25 of 61
Page 1 of 3 1 2 3