Search:

Dont feel bad man.My brother bent the chassis on his revo platinum,and broke many other parts.I tuned the sixth tank,and he broke it 2 minutes later.Lol it happens

try taking your servo saver off,and recentering your steeering servo with the trim at 0* on the transmitter.Also you can switch them on the receiver.Swap the steering with the throttle.Move your...

I have a t maxx with an extended chassis from flm.Currently I'm using the 2.4 black tranny.I swapped the 2.5 with a 3.3 (using the same clutch bell) and the same 70t spur.I notice the engine turning...

had my tranny come loose,and it would lift up and bounce of the clutch bell.Stripping the spur gear in the process.

I hit a phone pole wide open at 40+mph with my 2.5r.Instant dead stop, and only replace 20 bucks in parts.Truck still runs like new.you can't beat the truck for the price.As for tuning my problem,...

i was thinking the same thing

http://s303.photobucket.com/albums/nn131/briancastle/t-max/
sorry not aloud to post pics yet i guess.so i had to throw a few on this way

Here is my latest build.It started out as a few extra parts bought online for my 2.5r t maxx.This truck will be set aside to race when done.beside the tires and extra aluminum i can loose any ideas...

i tried to put an ofna .26 on my flm 1.5 extened chassis.The bell gear had much larger thicker theeth,and it would not mesh with the spur gear. How did you get aroung this? thanks

:) The 2.5R has larger ports over the normal 2.5. Is what my lhs said anyways.

The bigger your spur gear the higher top speed. the smaller the gear will give you a faster launch off the line but will hurt your top speed a bit.A 70 tooth, 32 pich, gear is about the smallest you...

I think ya'll took that all wrong. i used a cloth to polish gold (a jewlers cloth) no sanding ,didnt remove any brass lol. The most i feel i did to the sleeve was make it shine more then it already ...

Sandpaper? lol it was a jewlers cloth for GOLD wich is far softer then brass

yep lubed it with wd40 before putting it back together. 10-4 on the flywheel mark , didnt think of it. thanks guys

hold on man lol the sleeve is brass and i use a cloth just a cloth non abrasive for gold and beings gold is softer then brass i figured i was ok.the most i rubbed off was maybe some dried tarnished...

rtr tires on my 3.3 t maxx will break an axil shaft everytime if im not carefull.I'm still debating rather i like the full posi rears or not

if its running to rich your engine wont have enough umph to engage the syntripical clutch that shifts it into the second gear.thats what mine does anyway. hope it helps:)

i have a 3.3 with locking diff in the rear.if I nail the throttle i'll break an axil shaft everytime.Are there steal replacements? I have a steal rear center shaft i had to use because of and...

i traded in a 2.5r and my lhs said they send them back are then taken aparts by interns my guess lol and the parts are seperated according to the types of metal. abc aluminum brass and chrome. then...

trinity premo 30% is what I use with my 2.5r and my 3.3.With a long hot plug.truck will hit 2nd gear and still ride wheelies

howdy all,
I have a t-maxx that came with the 2.5 not the 2.5R. after awhile i went and got a 2.5r and slapped on the truck.I broke it on as per the dvd that came with in the...