Search:

Your best bet is call Traxxas support and ask them. Some manufacturers do have replacement antennas. Maybe you could send it in to them and have them replace it. I don't use traxxas radio so I don't...

As for having that much money you can hire an attorney to collect the prize for you. 33 people matched the 5 numbers but didn't have the powerball number so they get at least 1 million dollars and...

The differentials can be put in upside down (they are marked as to which way is up) so if you put one in right and the other in upside the wheels will turn in opposite direction.

Pick the truck and give it gas to see if both front and rear wheels are turning the same direction.

Yes the kits for the 2.5 is the same as the 3.3. The 3.3 engine uses the same carb. as the 2.5 engine did.

No the bumper mount is on right.

http://i81.photobucket.com/albums/j235/fallonguy/59074_TQi_exploded-views_130104_5907_Front_Assembly1_zps3500e391.jpg

It does look like it may be broken.

The *Can not be used with stock rear bumper mount setup. Must be used with rear wing mount #5411* is from the revo instruction. The slayer kit is almost the same as the revo kit but in the slayer you...

It's the same when they came out with the 3.3 engine it was made to be a drop in engine for the 2.5. So most of the parts are the same what happened is no one ever changed it to say 3.3 but it is the...

Save your money if the bearing blew out your going to have more damage the the engine then just the bearings (the piston and sleeve and maybe the head) if you buy a new engine it will come with a new...

I would suggest you take the engine completely apart and clean everything. Reset the carb to factory setting because you put a new piston and sleeve in you have to go through the break in all over...

Word of warning is make sure when you put it back together the differential is right side up. It's marked on top which side goes up and you can put it in upside down people do it all the time. What I...

Yes Duratrax just never updated it's info when the 3.3 came out but the 2.5, 2.5R and 3.3 use the same back plate DTXP6030. I use the Duratrax Super Start and really like it a lot one thing is you...

As long as you do the steps it doesn't matter how long you take to do it. It's a good idea the make sure the piston is all the way down when you let it cool.

You don't need to buy the whole transmission only the case they're around 7 to 10 dollars. look on ebay you can find them all the time also the transmission case for the slayer is the same as the...

Do you have the 3.3 chassis? You can't put the rear brake on with the 2.5 chassis without moding the chassis.

The revo and slayer are designed as a racing truck the fuel line length is so the engine will stay running for a short time if you flip over so a turn marshal can get to your truck and turn it back...

You don't want to do that it will cause an ever leaner condition. To shut the engine pinch the fuel line as close to the carb. as possible or you can plug the exhaust pipe which will stop the engine...

Look on Tower hobbies for jato brake they're $3.69 or you can get 2 for $7.06
Traxxas Brake Disc Jato

You should go back to the factory settings
Factory Carburetor Settings
The transmission will shift into 2nd when it reaches a certain RPM the most common reason it doesn't shift is because of...

When you turn on your radio and receiver it search for a clear channel and then locks it out so no other radio can be on that channel. The 2.4GHz system will not interfere with each other or with the...

The link only takes you to the gmail sign-in screen

The point I was trying to make (maybe not explaining it right) The notch on the crankshaft act like a intake valve and is only open for a short period of time. ...

Another thing I just though about is when the intake on the crankshaft is closed where it all the air from the supercharger going? It would have to blow back through the supercharger and that would...

Another thing a lot of people don't think or know about is the intake opening on the crank shaft is only open for a short period of time (see the animation on the link that Double G posted) and...

It's hard to say with only being able to hear it and not being able to see. Are you priming it by holding your finger over the exhaust pipe? Really we can help a lot more if we can see the truck when...