Search:

You will always break parts in RC...you wont make a bullet proof kit...rims break...especially when plastic meets solid concrete at speed. But I have always gone with proline rims and tires and have...

I always liked the RPM parts I had on my jato.

I don't recommend attempting to modify your own engine, if you don't know what you are doing you will end up doing more harm than good and most likely completely mess up your engine. However there...

Only once when the engine is brand new...

Also if your temping around 200...then your engine can still be leaned out for more power. Whats your idle gap? It may be to big causing you to richen...

Bump for the day

Not pictured but newly installed is a new stock front bumper, and a new rear bumper. As well as a new set of receiver and center battery covers.

Will accept offers.

EZ Read Version:

$230 paypal

Jato
RPM A-Arms frnt, rear
Trx Red 7075 Turnbuckles
Trx 7075 Chassis
Tactic 2.4ghz Radio
Power Hd Steering Servo

This is a used jato with a lot of upgrades. Including a new 3.3 w/pull start with 6 tanks on it. Everything on the vehicle is in working order, but the engine still needs some more time for break...

Wont make a difference cuz it will just heat up again in the line.

Ebay, google...online hobby retailers...

You could have started your own thread :p. Plug the exhaust stinger, which is the tip protruding from the end of the black pipe, and press the ez start button to get fuel flowing to the engine. ...

3.3's are faster with out a doubt. However, O.S. are far more reliable.

Nitro was what I started out with and what I have always run.

In answer to your questions:
Nitro kits are just as durable as their electric counterparts. But you do have to tune the engine on...

I would not recommend aluminum shock towers because they put a lot of impact stress on the plastic gear box and front bulkhead. Plastic tends to absorb impact while aluminum tends to transmit it to...

Steering at high speed...?
...
...
Bahahahahhahahaha, ROTFL what a joke, oh good one...oh my goodness... let me wipe those tears from my face...wow...oh, woo~ee

Thats a goodn'...dang dont hear...

I just copied that into google translate :D

Why do you want to gear so high?

T-Maxx and Jato gears are the same so I would check T-Maxx gearing...I found a 72t Spur...

But the next question is what is the largest size spur the jato will...

For starters, welcome to the forum :cool:.

Integy aluminum parts are of low quality IMHO. From my understanding they use non tempered aluminum that is not very strong. For the most part I do not...

For the Rx, wrap it in a balloon. For the esc...it is not really ment for the water. And trying to make it so will decrease heat dissipation. Same with the motor...however...

Heres a video and...

You mean the drive shafts?

Or do you mean the shafts that hold the spider gears inside the diff?

My guess, you messed up somewhere in the rebuild.

Remove that thought from your mind this instant.

New bodies look awesome...and so shiny :p~

It sounded to me like he has a stock XL-5 Rustler and its not fast enuf'/not enuf' run time.

Both of those are medium hot plugs...so they won't make a difference either way you go.

And choosing the correct plug depends on 2 major factors:

Air Temperature

And Nitro %

Generally a...